BRIDGEPORT 9″ x 42″ VERTICAL MILLING MACHINE – 8-SPEED WITH 6 VISE. Item will only include what is shown in the photos. Most of our items are used and may show signs of wear and/or need calibration; we test the basic functional features of our items and describe the physical condition to the best of our knowledge. MACHINE IS IN WORKING CONDITION, CHECK THE PICTURES THEY’RE ALSO PART OF THE DESCRIPTION. ITEM IS AVAILABLE FOR INSPECTION AND IT’S CURRENTLY LOCATED AT THE CITY OF PICO RIVERA. Made in the U. By Bridgeport Machines Inc. This is a used Multiple Speed Vertical Milling Machine in working condition. 1 Horsepower Spindle Motor. Height Above Floor: 47-1/4. Travels: Table Travel (X-Axis): 30″ Saddle Travel (Y-Axis): 12″ Knee Travel (Z-Axis): 16″ Quill Travel: 5″ Ram Travel: 12. Spindle: Throat Distance: 6.75min. / 18.75 max. Table to Spindle Nose: 2.5 min. / 18.25 max. Add 4″ with riser block Spindle Diameter: 1.875″ Quill Diameter: 3.375 Quill Feed: 0.0015 / 0.003 / 0.006 in. /rev Taper: R8 Speeds (8): 80 to 2,720 rpm (80 – 135 – 210 – 325 – 660 – 1,115 – 1,750 – 2,720). Head Adjustments: Head Cant (forward/back): 45 degrees Head Tilt (side to side): 90 degrees Head Swivel (side to side): 360 degrees. General: Motor: 1 Horsepower, 1,420 / 1,730 rpm, 208 / 220 / 380 / 440 Volt, 50 / 60 Hz Electrical: 230/460 Volt, Three Phase Overall Dimensions: 58″ x 58″ x 78 tall. Comes as shown in pictures. Most of our item are used and may show signs of wear and/or need calibration, we test the basic functional features of our items and describe the physical condition to the best of our knowledge. We clearly list these items as not being tested, damaged or for parts only. All AS-IS sales are final. Please note that exchanges are not always available for every item we sell. All Items must be paid at the same time for the same invoice. All items should have the same address. Please look at the table below to get a better estimate. Crating and Special Packing Requirements. Please keep all the elements of the package together as you received it and take clear pictures of the damage. The item “BRIDGEPORT 9 x 42 VERTICAL MILLING MACHINE 8-SPEED WITH 6 VISE” is in sale since Sunday, August 13, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “bidonindustrial” and is located in Rancho Cucamonga, California. This item can be shipped to United States.

I TOOK THIS IN A TRADE DEAL I DID LAST WEEK. THERE IS NO IDLER PULLEY KNOB–FORWARD REVERSE SWITCH. COULD USE A GOOD CLEANING. RUMFORD SUPPLY & MACHINERY COMPANY INC. SERVING THE MACHINE TOOL INDUSTRY FOR 57 YEARS. The item “CLAUSING MODEL 8530 VERTICAL MILLING MACHINE 110 VOLTS NEW VISE ETC” is in sale since Thursday, September 21, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “toolingking” and is located in Seekonk, Massachusetts. This item can’t be shipped, the buyer must pick up the item.

• Brand: CLAUSING
• MPN: VERTICAL MILLER
• Model: 8530

Self Centering 5″ chuck on base with 1 3/16″ center bore. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I tried to take photos of the parts that came with it. PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. The item “MACHINIST LATHE 5 3 Jaw Lathe Chuck on Indexing Rotary Base for Mill 1 3/16 BR” is in sale since Wednesday, October 08, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “gigigirl111″ and is located in Morris Plains, New Jersey. This item can be shipped worldwide.

ALSGS AL-310S 110V / 220V milling machine power feed 450 in-lb power feed. Milling machine power feed. X, Y or Z axis. 110V / 220V option. The item “ALSGS AL-310S 110V / 220V milling machine power feed 450 in-lb power feed” is in sale since Wednesday, May 06, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “km4321″ and is located in Garden Grove, California. This item can be shipped to United States.

• Brand: Unbranded/Generic
• MPN: Does Not Apply

Milling Machine Accessory – Right Angle Attachment for NT30 spindle taper. Milling Machine Right Angle Attachment. Fits Bridgeport-style milling machines with a 3 3/8 (8586mm) quill diameter and NT30 spindle taper. Converts a vertical mill into a horizontal mill. Note: Maximum allowed speed with right angle attachment is 2000 rpm. Spindle runout is ± 20 micron (0.00078). WHAT YOU’LL RECEIVE. Bolt to act as mini drawbar for stub arbor. If You have any questions regarding this item, please let us know we’ll be happy to help. The item “Milling Machine Accessory Right Angle Attachment for NT30 spindle taper” is in sale since Wednesday, May 17, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eisenmachineryinc” and is located in Ontario, California. This item can be shipped worldwide.

• Brand: GEM POWER
• MPN: G102-86mm-NT30
• Country/Region of Manufacture: Taiwan
• Model: G102-NT30

NICE ALBERTI RIGHT ANGLE HEAD W/ NAKANISHI ATTACHMENT CAT 50 SHANK. T90-0.3 / RA-200. The item “NICE ALBERTI RIGHT ANGLE HEAD With NAKANISHI ATTACHMENT CAT 50 SHANK” is in sale since Tuesday, July 26, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “randc_inc” and is located in El Monte, California. This item can be shipped to United States.

Atlas MFC Mill Vertical. Items replaced in refurbish are M6-33 bushing on M6-101-64 gear, M6-255 washer on Back Gear Shaft Assembly, MF-26 yoke on universal scope sleeve assembly, M1-11 lead nut, 10F-19 nut, S7-60 spiral gear and m1-83 thrust bearing, in lift screw assembly, S7-60 gear in knee assembly, and all belts. Unit has been thoroughly cleaned but not repainted. In good operating shape. This mill is set up for vertical only not horizontal milling. Unit will sell with vice shown. The item “Atlas MFC Mill Vertical” is in sale since Tuesday, September 12, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “cfwhiteh3ga9″ and is located in Bethel, North Carolina. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas
• Country/Region of Manufacture: United States
• Model: MFC vertical

Remanufactured Bridgeport Milling Machines with 48″ Table, 42″ Table also available price adjusted accordingly. Highest Spindle Speed (RPM). For more than 60 years, the Bridgeport Series I Standard Mill – the original, all-purpose mill – has been the “real thing” in milling, drilling, and boring for metalworking shops throughout the world. Today, the Series I Standard continues to fulfill the industry’s need for an accurate, reliable, and versatile mill. The Series I Standard features an innovative airflow cooling design that uses no external fans to prolong bearing life and prevent expansion from heat build-up. A full range of accessories are available, including optional chrome-plated ways and gibs to ensure that the machine will last a lifetime. 18.75 (476 mm). 6.75 (171 mm). 42 x 9 (1245 x 299 mm). T Slot center distance. 0.625 (16 mm). Height Above Floor Max. 47.25 (1200 mm). Weight of Workpiece Max. 750 lb (340 kg). 3 hp (2.2 kW). 2 hp (1.5 kW). Power Quill Feed 3. 3/4 (19 mm) Mild Steel. 6 (152 mm) Mild Steel. 1.875 in (48 mm). 3.375 (86 mm). 60 – 500 rpm. 0.0015/rev (0.038 mm). 0.003″/rev (0.076 mm) 0.006″/rev (0.152 mm). 8.2 x 5.3 ft (2.5 x 1.6 m). 7.04 ft (2.15 m). Please feel free to call at any time Monday – Sunday 7:00am – 5:00pm EST. If we do not answer please kindly leave a detailed message. We will return all messages by the next. 2 HP Vari Speed Head. 1 Shot Lube System. We will assist you in any reasonable way to help get your items to your destination, Thank You. All products are as is. I shall have no other obligation or liability, direct or indirect, of any kind, including liability for special, incidental, or consequential damages. This item is for sale locally and may end at anytime. The item “Bridgeport Milling Machine with 48 Table & 2hp Vari Speed Head, 1 Year Warranty” is in sale since Friday, January 27, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “guerreramachinecompanyllc” and is located in Watertown, Connecticut. This item can be shipped to United States.

• Brand: Bridgeport
• MPN: Does Not Apply

This is a signed Brown&Sharpe 10 rotary table. Partial drill hole on the top but not through to the the T slot. No other breaks, cracks or repairs. The item “10 Brown & Sharpe Rotary Table for Milling Machine Mill CNC Bridgeport Vintage” is in sale since Sunday, June 18, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “forasong123″ and is located in Longmeadow, Massachusetts. This item can be shipped to United States.

• Brand: Brown & Sharpe
• Country/Region of Manufacture: United States
• Model: 10″
• MPN: 10″