NO STAND WITH THIS LISTING. IF YOU ARE LOOKING FOR A STAND, PLEASE SEE OUR OTHER LISTING. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Larger Dials at Table Ends, Graduated in. 001, For Easier Reading, And More Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). MUCH Larger Travels and work area. Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. 50-3000 RPM variable speed with the turn of a knob, properly set up with Low and High for a wider speed range, and plenty of power at lower speeds. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Variable Speed with Belt Drive and Brushless DC Motor 4. Way Cover Set 5. R8 Spindle Taper 7. Quill/Spindle Depth DRO 8. PM30MV (DC Brushless Motor, and Belt Drive Head is Standard) Max. Drilling Capacity 1-1/4 Max. End Milling Capacity 3/4 Max. Face Milling Capacity 3-1/2 Table Size 8-1/4 x 33 Cross Travel (Y Axis) 8-3/4 Longitudinal Travel (X Axis) 23 Table Leadscrew Pitch 10 TPI. 100 Per Turn Table Dial Graduations. 001 Vertical Travel (Z Axis) 14 Max Distance Spindle to Table 17 Taper of Spindle R-8, w/7/16-20 Drawbar Thread Spindle Travel 3 T Slot Size Actual size 14mm, our 9/16 kit listed is sized for this machine Range of Spindle Speeds 50-3000 rpm, 2 Ranges (Properly set up with high and low range belt positions for more power at lower speeds as it should be) Headstock Tilt Left & Right ±90° Motor 2 HP Net Weight 530 LBS Power Required 220V, Single Phase, 10 Amp. Dimensions Height, Head at normal working height (W/O Stand) 39 Max Height, Head at top of travel (W/O stand) 48 Width, Tip to Tip of table handles 46-1/4 Dimension Front To Back, from back of chip pan, to front table handle tip 31 (Can be pushed back against a wall, and table handle tip will be 31 from wall). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. The item “PM-30MV VERTICAL BENCH TYPE MILLING MACHINE VARIABLE SPEED 3-AXIS DRO SHIPS FREE” is in sale since Tuesday, September 17, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• MPN: PM-30MV w/DRO
• Brand: Precision Matthews
• Country//Region of Manufacture: China

THIS LISTING COMES WITH A STAND. IF YOU ARE LOOKING FOR A MILL WITH NO STAND, PLEASE SEE OUR OTHER LISTING. Extremely Reliable, Brushless DC Variable Speed Motor Included Standard. Belt Drive Design, For Smoother, Quieter Running. Extra Large Column To Base Mount. 3 Bolt Head to Column Mount is Standard, Also For Increased Rigidity. Larger Dials at Table Ends, Graduated in. 001, For Easier Reading, And More Accurate Table Movements. Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch. More Information below It is NOT just the same old model with just a belt drive upgrade Be sure to compare carefully. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES). MUCH Larger Travels and work area. Quill DRO Included Standard (This is for the spindle up/down movement). 3 Bolt Head Mount is now standard (where the head mounts to the Z Axis), for more rigidity when milling Much improved over the single bolt mount type. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. 001 Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately One line on the dial is. 001, one full turn of the handwheel is. 100, much easier to use than those with odd metric conversions. 50-3000 RPM variable speed with the turn of a knob, properly set up with Low and High for a wider speed range, and plenty of power at lower speeds. Precision ground ways for smoother movements Not just rough milled. Thrust Bearings in leadscrew ends not bushings Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped). Variable Speed with Belt Drive and Brushless DC Motor 4. Way Cover Set 5. R8 Spindle Taper 7. Quill/Spindle Depth DRO 8. PM30MV (DC Brushless Motor, and Belt Drive Head is Standard) Max. Drilling Capacity 1-1/4 Max. End Milling Capacity 3/4 Max. Face Milling Capacity 3-1/2 Table Size 8-1/4 x 33 Cross Travel (Y Axis) 8-3/4 Longitudinal Travel (X Axis) 23 Table Leadscrew Pitch 10 TPI. 100 Per Turn Table Dial Graduations. 001 Vertical Travel (Z Axis) 14 Max Distance Spindle to Table 17 Taper of Spindle R-8, w/7/16-20 Drawbar Thread Spindle Travel 3 T Slot Size Actual size 14mm, our 9/16 kit listed is sized for this machine Range of Spindle Speeds 50-3000 rpm, 2 Ranges (Properly set up with high and low range belt positions for more power at lower speeds as it should be) Headstock Tilt Left & Right ±90° Motor 2 HP Net Weight (Without Stand) 530 LBS: 605 LBS (With Stand) Power Required 220V, Single Phase, 10 Amp. Dimensions Height, Head at normal working height 67 (With Stand) Max Height, Head at top of travel 67. Width, Tip to Tip of table handles 46-1/4 Dimension Front To Back, from back of chip pan, to front table handle tip 31 (Can be pushed back against a wall, and table handle tip will be 31 from wall). Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills. The item “PM-30MV VERTICAL BENCH TYPE MILLING MACHINE with3-AXIS DRO AND STAND FREE SHIPPING” is in sale since Tuesday, September 17, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• MPN: PM-30MV w/DRO AND STAND
• Brand: Precision Matthews
• Country//Region of Manufacture: China

ProCutCNC LT4800G 4′x8′ Lite CNC Gantry Router or Plasma Kit, Soft Touch Z Axis. The Bolt Together Table series is the only CNC table in its price range that incorporates a plasma Z axis with a ability to attach a router to it in a matter of minute. Making it one of the most vestal CNC tables on the market today. Don’t make the mistake and think that a plasma table has to “Only” be a plasma table! These bolt together table are a great way to get started on owning your own CNC table. These tables can be used in may applications. They are capable of doing both plasma cutting and routering. SPECIFICATIONS: 1000 ipm Rapid Travel Frame Made From 2×2 Square Tubing Gantry “Router Compatible” 2 1/4 HP “Soft Touch” Or “Touch & Go” Z axis (4″ Travel) “Router Compatible 2 1/4 HP Porter-Cable 890 Completely Bolt together. “Soft Touch” Or “Touch & Go” Z axis (4″ Travel) “Router Compatible” 2 1/4 HP Porter-Cable 890 Gantry (60″ x 120″ Travel) “Router Compatible” 2 1/4 HP Motor Mounts Hardened V-Rail X-axis w/ V-Bearings (3) 1/4″ Spur Gears (3) 1/4″ 48″ Gear Rack (2) 1/4″ 60″ Gear Racks Hardware Assembly Instruction “Included”. PLEASE LOOK AT OPTION TO COMPLETE THE FULL TABLE. This product is a built or assembled to order here in the USA. We will try to get the order out before that time. Sorry we do not accept personal checks due to the process of making sure they clear. Most important, we strive to have some of the best prices available and start all auctions as low as we can so that all have a chance to win. ProCutCNC has revolutionized the way hobbyists and fabricators get the job done. We are a great family business who can proudly display Made in the USA on every product. ProCutCNC Division of: Team Moto Inc. Brooklyn Park, MN Product Support: We offer support on our website contact page procutcnc. The item “ProCutCNC LT4800G 4′x8′ Lite CNC Gantry Router or Plasma Kit, Soft Touch Z Axis” is in sale since Wednesday, March 27, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Other Metalworking Equipment”. The seller is “jr7k158″ and is located in Minneapolis, Minnesota. This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Chile.

• Brand: ProCutCNC
• MPN: LT4800G