feed Subscribe to feed
pic
19. 03
2023

AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM

Written by: admin - Posted in: as-250 - Tags: , , , , , , , , ,
AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


American Business ALL ITEMS IN STOCK IN CALIFORNIA. American STANDARD PRODUCTS QUALITY GUARANTEED. AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. WHY SHOP WITH FACTORY-SUPPLIES? Item was as described and arrived quickly. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs. Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions. High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well. Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop. Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8 diameter shaft on the end. Such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Before installation, be sure to turn off the power supply of the milling machine. Don’t install the power feed under live condition. The product is supplied by AC110V 50/60Hz Please? Prepare the required power supply for the product. If the product is used in a region not in conformity with the national power supply, please prepare a transformer, avoid using incorrect power supply and result in damage of the product. The product is provided with overload protection, the power supply will be cut out in case of overload or stuck. It can be reset automatically by restarting the power switch. Check whether spiral gear oil is enough when carrying out maintenance. Open the carbon brush cover semiannually to check whether the carbon brush is worn. If the length is less than 7mm, it is recommended to replace the two sets of carbon brushes at the same time. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). AS-250-150 X-Axis Power Feed for Milling Machine x 1. Set of Necessary Accessories x 1. Product Manual x 1. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “super-homeonline” and is located in this country: US. This item can be shipped to United States.

  • Rotate speed: 0-200 RPM
  • Torque: 150 lbs
  • Package size: 13\
  • Gross weight: 6.5 kg(14.3 lb)
  • Warranty: 5 Years
  • UPC: 0895800908447
  • EAN: 0895800908447
  • Brand: VEVOR
  • Function: Milling
  • Control: Manual
  • Machine Type: Milling Machine
  • Power Source: Electric
  • Max Spindle Speed (RPM): 200 RPM
  • Voltage: 110 V
  • Model: AS-250
  • MPN: ZCXUN00525
14. 03
2023

AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM

Written by: admin - Posted in: as-250 - Tags: , , , , , , , , ,
AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


AS-250 Torque Power Feed Milling Machine for Bridgeport X-Axis 150Lbs 0-200RPM


American Business ALL ITEMS IN STOCK IN CALIFORNIA. American STANDARD PRODUCTS QUALITY GUARANTEED. AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. WHY SHOP WITH BLTPRESS? Item was as described and arrived quickly. AS-250-150 X-Axis Power Feed Kit. 0-200 RPM Rotate Speed & 150 in-lb Torque & 110 V, 60 Hz. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. X-axis Power FeedPower Feed X-Axis, Voltage: 110V, 60Hz, Rotate Speed: 200 RPM, Max Torque: 150 in-lb, Dimension: 33 x 20 x 18cm / 12.99” x 7.87” x 7.09”. Easy SetupFit almost any vertical knee type milling machine with the 5/8 shaft end. Small volume and easy installation, noiseless direction changes. Durable & Long LastingSecure design helps to keep transmission gear and electronic components; two gears of this power table feed will not mesh and wear at the same spot, maximizing durability and longevity. Ergonomic DesignPower feed is equipped with security feature to keep transmission gear and electronic components as to meet the requirements of ergonomics. Quiet & Rapid OperationWith speed adjust knob, speed can be adjusted according to operator’s requirement, ranging from 0-9. Jog switch should be at “FEED” position. Fit almost any vertical knee type milling machine with the 5/8 shaft end. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). AS-250-150 X-Axis Power Feed for Milling Machine x 1. Set of Necessary Accessories x 1. English Manual x 1. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “best_factory” and is located in this country: US. This item can be shipped to United States.

  • Rotate speed: 0-200 RPM
  • Torque: 150 lbs
  • Package size: 13\
  • Gross weight: 6.5 kg(14.3 lb)
  • Warranty: Lifetime
  • UPC: 0895800908294
  • EAN: 0895800908294
  • Brand: VEVOR
  • Function: Milling
  • Control: Manual
  • Machine Type: Milling Machine
  • Power Source: Electric
  • Max Spindle Speed (RPM): 200 rpm
  • Voltage: 110 V
  • Model: AS-250
  • MPN: XUNBS00840
27. 05
2022

AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM

Written by: admin - Posted in: as-250 - Tags: , , , , , , , , , ,
AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. All items are dispatched from our warehouse in Azusa, CA. Please contact our customer service team immediately if. You changed your mind and wish to request a return. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. We seeks to sell the greatest value products on the market. These items should be of an acceptable quality, fit for purpose, and matching their description. We have a highly experienced engineering and technical team who specialise in researching and developing all our products. We benchmark our products against high standards and that’s why our customers keep coming back. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “viphomesupply” and is located in this country: US. This item can be shipped to United States.

  • Rotate speed: 0-200 RPM
  • Torque: 150 lbs
  • Package size: 13\
  • Gross weight: 6.5 kg(14.3 lb)
  • Warranty: Lifetime
  • UPC: 0895800908447
  • EAN: 0895800908447
  • Brand: VEVOR
  • Function: Milling
  • Control: Manual
  • Machine Type: Milling Machine
  • Power Source: Electric
  • Max Spindle Speed (RPM): 200 RPM
  • Voltage: 110 V
  • Model: AS-250
  • MPN: ZCXUN00525
17. 07
2021

AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , , , ,
AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft


AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft


AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft


AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft


AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft


AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft


AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft


AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft


AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft


AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft


AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft


AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft


X-AXIS POWER FEED – Voltage: 110V, 60Hz; Revolution Speed: 0-200 RPM. The power table feed is made of sturdy and durable aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. LONG SERVICE LIFE – The power feed for milling machine features smooth and strengthened polished that resists water, oil, and dust. That ensures its long service life in an awful working environment. HIGH EFFICIENCY & PRECISION: The x-axis power feed is equipped with spiral bevel gears and bearings to achieve rapidity and high efficiency and precision as well. QUIET & EASY OPERATION – The milling machine power feed features 9 levels of moving speed, set by the rotary knob on the side. Moreover, it doesn’t make noises when moving, good news for a workshop. WIDE APPLICATION – The knee mill power feed fits most vertical knee mills with a 5/8 shaft end, such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, etc. The compact power knee feed can work automatically at a constant speed or manually by pressing the speed control. And the circuit breaker protects the transmission gear and electronic components. The milling machine table power feed is made of rugged aluminum material. Its finish has been polished and resists corrosion and wear. That makes it work for a long time. The power feed for mill adopts spiral bevel gears to move freely and quietly on the mill. Considering that it is noisy in the garage, it would be helpful that the feed cut noises. The mill power feed is also equipped with precise bearings that ensure its smooth and stable movement. Less vibration and strain enhance the efficiency of the whole milling machine. The power feed for milling machine is easy to install and operate. Only a little maintenance is enough for its long-term regular running. The power table feed fits most vertical knee mills with a 5/8 shaft end, such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, etc. AL-310S X-Axis Power Feed Kit. Our AL-310S x-axis feed kit features a robust shell and precise components. It works efficiently and quietly on a milling machine with a 5/8 shaft end. Besides, it is designed with buttons and knobs for simple operation. It is a good choice for your milling machine. High Efficiency & Precision. Quiet & Easy Operation. Rotate Speed: 0-200 RPM. Max Torque: 450 in-lb. Max Feed Rate: 650 mm/min. Max Return Speed: 850 mm/min. Dimension: 8″x4.5″x13. Package Size: 11.8″x8.7″x13.8. Gross Weight: 16.5 lbs. 1 x Power Feed for Milling Machine. 8 x Adjustable Pad. 2 x Travel Stop Assembly. 1 x Bevel Gear. 1 x Dial Nut. 1 x Locking Nut. 1 x Product Manual. Power Feed Milling Machine. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “AL-310S 450lbs Torque X-AXIS Power Feed Milling Machine 110V 0-200RPM 5/8 Shaft” is in sale since Wednesday, August 14, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “believehappysale9″ and is located in Perth Amboy, New Jersey. This item can be shipped to United States, Canada, Mexico.

  • Brand: VEVOR
  • MPN: REWLK006
  • Model: AL-310S
  • Power Source: Electric
  • Voltage: 110V, 50/60Hz
  • Control: Manual
  • Function: Milling
  • Machine Type: Milling Machine
  • Rotate speed: 0-200 RPM
  • Max torque: 450 in-lb
  • Max feed rate: 650mm/min
  • Max return speed: 850mm/min
  • Dimension: 8 x 4.5 x 13 inches
  • Gross weight: 16.5 lbs
19. 08
2020

AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , , , ,
AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM



X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage: 110 V, 60 Hz. Rotate speed: 0-200 rpm. Machine Type: Milling Machine. Package size: 332018 cm (137.97 in). Gross weight: 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. Power Feed Milling Machine. Sign up to newsletter. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “AS-250 150Lbs Torque Power Feed Milling Machine X-Axis 110V Bridgeport 0-200RPM” is in sale since Wednesday, October 18, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “bestfashionitem” and is located in Hebron, Kentucky. This item can be shipped to United States, Canada, Mexico, Germany.

  • Brand: VEVOR
  • MPN: FRCXZ00945
  • Model: AS-250
  • Power Source: Electric
  • Voltage: 110 V
  • Control: Manual
  • Function: Milling
  • Machine Type: Milling Machine
  • RPM: 0~200
  • TORQUE: 150LBS
  • Gross weight: 6.5 kg(14.3 lb)
10. 03
2019

AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , , ,
AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM


Sign up to Newsletters. X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage: 110 V, 60 Hz. Rotate speed: 0-200 rpm. Length: 33 cm (13 inch). Width: 20 cm (7.9 inch). Height: 18 cm (7 inch). Gross weight: 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM” is in sale since Friday, August 24, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “happykisssoul” and is located in Ontario, California. This item can be shipped to United States, Canada, Mexico, Germany.

  • Brand: VEVOR
  • MPN: XUNBS00840
  • Model: AS-250-150
  • Country/Region of Manufacture: CHINA
  • RPM: 0~200
  • TORQUE: 150LBS
  • Type: X-axis
  • VOLTAGE: 110 V, 60 Hz
  • Gross weight: 6.5 kg(14.3 lb)
21. 12
2018

AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS L. A. Ship 0-200RPM

Written by: admin - Posted in: as-250 - Tags: , , , , , , , , , ,
AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS L. A. Ship 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS L. A. Ship 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS L. A. Ship 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS L. A. Ship 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS L. A. Ship 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS L. A. Ship 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS L. A. Ship 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS L. A. Ship 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS L. A. Ship 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS L. A. Ship 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS L. A. Ship 0-200RPM


AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS L. A. Ship 0-200RPM


Sign up to Newsletters. X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operators requirement, ranging from 0-9. Normally, jog switch should be at FEED position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Voltage: 110 V, 60 Hz. Rotate speed: 0-200 rpm. Length: 33 cm (13 inch). Width: 20 cm (7.9 inch). Height: 18 cm (7 inch). Gross weight: 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Leave a Message if. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item “AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS L. A. Ship 0-200RPM” is in sale since Monday, September 11, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “supply2worldwide” and is located in Ontario, California. This item can be shipped to United States, all countries in Europe, Mexico, Australia.

  • Brand: VEVOR
  • MPN: g787400924
  • Model: AS-250-150
  • Country/Region of Manufacture: CHINA
  • RPM: 0~200
  • TORQUE: 150LBS
  • Type: X-axis
  • VOLTAGE: 110 V, 60 Hz
  • Gross weight: 6.5 kg(14.3 lb)

Search this blog