This 1995 Matsuura RA-1F is in really good condition. For 99% of it’s life it only cut aluminum. It is fully functional and ready for your production. This machine has a BT 40, 15,000 rpm spindle, as well as an AUTOMATIC PALLET CHANGER! The machine comes with a drip feed unit, making the memory capacity basically limitless. I have BT-40 toolholders available as well, contact me for details. Please send me a message or call 7154516842. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “white-cnc” and is located in this country: US. This item can be shipped to United States.

• Spindle Horsepower: 7 hp
• Machine Type: Machining Center
• Power Source: Electric
• Custom Bundle: No
• Spindle Taper: BT-40
• Modified Item: No
• Z-Axis Travel Bed: 16 in – 20 in
• Brand: Matsuura
• Function: Milling
• X-Axis Travel Bed: 16 in – 20 in
• Type: CNC, Vertical
• Control: CNC
• Model Year: 1995
• Max Spindle Speed (RPM): 10001 – 15000
• Voltage: 220 V
• Model: RA-1F
• Y-Axis Travel Bed: 10 in – 15 in
• Country/Region of Manufacture: Japan

2016 Haas DM-1 Vertical Machining Center. Total run time and tool changes pictured will increase do to machine still being used in production. Machine is listed in other market places so this ad may end without notice. Machine includes the following specs and options. Z Axis: 15.5. 20 x 16 x 15.5. 15 hp vector drive. 15,000 rpm spindle. High-speed 18 + 1 side-mount tool changer. Power failure detection module. 1 MB program memory. Renishaw wireless intuitive probing system, includes macros, spindle orientation, coordinate rotation and scaling. 15 color LCD monitor. Rear chip lift auger. 45-gallon coolant tank with ¾ hp flood-coolant pump. 4th-Axis Drive, Wiring, and Rotary indexer. Atlas 16C Pneumatic Collet Chuck. Haas 160 mm (6.3) Dual-Spindle Rotary Table. Haas Through-Spindle Coolant system provides up to 300 psi of coolant to the cutting tool. Machine Weight: 5,500lbs. We will load machine uncrated onto flat bed trailer between the hours of 8 a. Fri with a 72hr notice at no additional cost. 420 Industrial Park Dr. The item “2016 HAAS DM-1 Vertical Machining Center, 15,000rpm Spindle, Renishaw Probe” is in sale since Thursday, February 18, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “werecommerce” and is located in Gladstone, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Model: DM-1
• Spindle Horsepower: 15 hp
• Machine Type: Machining Center
• Max Spindle Speed (RPM): 10001 – 15000
• Model Year: 2016
• Power Source: Electric
• X-Axis Travel Bed: 16 in – 20 in
• Y-Axis Travel Bed: 16 in – 20 in
• Z-Axis Travel Bed: 10 in – 15 in
• Spindle Taper: CAT 40
• Function: Milling
• Brand: Haas
• Control: CNC

Haas DM-2 CNC Machining center 15,000RPM. A very clean, low hours 2018 Haas DM2. Machine was used in an R&D prototype shop and no longer needed. 15,000 RPM Cat-40 spindle 28″x16″x15.5″ Travels 34″x15 Table 2400ipm Rapids, 1200ipm Feed 1GB Memory. High Speed Machining option. 18 Tool high-speed arm-type tool changer Rigid Tapping up to 5000RPM Coolant filtration Chip augers with rear discharge Compact: width: 83″, height: 98″ transport/102 operating Comes with approx 30 toolholders (see photos) Hours: 274 in cycle, 1682 power on. Video of machine running. ITEM IS OFFERED BY. Please do NOT pay until you are invoiced! Unless we receive a valid resale card. Aragon, LLC a service charge for each item we list. UPS only handles up to a maximum of 150 lbs. Wood crating and palletizing charges will be determined according to the size of the item. The following is the policy of Gary S. We regret that this policy must be put into place. It is required due to limited storage available at our facility. Items are subject to re-listing immediately upon forfeiture. Other than whats displayed in the images accompanying this listing, or mentioned in the description above, there are no manuals, instructions, additional parts or accessories. Unless otherwise stated in the description, the images show the actual , or an accurate representation of the item for sale. All images are photographed by us and are the exclusive property of Gary S. The description is written to the best of our knowledge, but is NOT guaranteed to be 100% accurate. Use of any material in this advertising is prohibited without express written permission from Gary S. The item “Haas DM-2 CNC Machining center, 15,000RPM, New in 2018, Compact VMC” is in sale since Monday, February 15, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “gary-aragon” and is located in Emeryville, California. This item can’t be shipped, the buyer must pick up the item.

• Model: DM2
• Machine Type: Machining Center
• Max Spindle Speed (RPM): 10001 – 15000
• Model Year: 2018
• Spindle Taper: CAT 40
• Function: Drilling
• Brand: Haas
• Control: CNC

Brand new 15,000rpm spindle less the 15 hours since installed. Recently tuned droves and adjusted gibs and straps. 40″x20″ of travel. Fantastic machine but we just needed something larger. Under power in southern California and can load on truck when our new machine comes. The item “Fadal vmc 4020 15,000rpm, 4 axis” is in sale since Tuesday, April 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ameribrade2x72″ and is located in Hesperia, California. This item can’t be shipped, the buyer must pick up the item.

• Brand: Fadal