feed Subscribe to feed
pic
11. 01
2020

PM-25MV CNC Mill Conversion Kit With DUBL BALL NUTS. 0015 BACKLASH ACCURACY

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , ,
PM-25MV CNC Mill Conversion Kit With DUBL BALL NUTS. 0015 BACKLASH ACCURACY


PM-25MV CNC Mill Conversion Kit With DUBL BALL NUTS. 0015 BACKLASH ACCURACY


PM-25MV CNC Mill Conversion Kit With DUBL BALL NUTS. 0015 BACKLASH ACCURACY


PM-25MV CNC Mill Conversion Kit With DUBL BALL NUTS. 0015 BACKLASH ACCURACY


PM-25MV CNC Mill Conversion Kit With DUBL BALL NUTS. 0015 BACKLASH ACCURACY


PM-25MV CNC Mill Conversion Kit With DUBL BALL NUTS. 0015 BACKLASH ACCURACY


PM-25MV CNC Mill Conversion Kit With DUBL BALL NUTS. 0015 BACKLASH ACCURACY


PM-25MV CNC Mill Conversion Kit With DUBL BALL NUTS. 0015 BACKLASH ACCURACY


PM-25MV CNC Mill Conversion Kit With DUBL BALL NUTS. 0015 BACKLASH ACCURACY


PM-25MV CNC Mill Conversion Kit With DUBL BALL NUTS. 0015 BACKLASH ACCURACY


PM-25MV CNC Mill Conversion Kit With DUBL BALL NUTS. 0015 BACKLASH ACCURACY


PM-25MV CNC Mill Conversion Kit With DUBL BALL NUTS. 0015 BACKLASH ACCURACY


So we decided that it needed a conversion kit that would out perform the kits that are available today, By adding Double Ballnuts to our ball screws we have doubled the accuracy to the kits that are now available today. Because the Double Nut ball screw is more efficient. You are able to run at NEMA 23 motor on the Z -axis instead of having to run a larger NEMA 34. We have tested this kit in production use for over a year now with great results. We packaged ALL this at a very competitive price. You will not find a better kit on the market for the price. Saddle modifications is NOT required. 0015 Accuracy / Backlash Sealed Bearings Bolt On 6061 Aircraft Aluminum Construction Stainless Steel Hardware. X/Y/Z Motor Mounts X/Y/Z 3/8″ &1/2″ Shaft Couplers X/Y/Z Double Ballnut Ball Screws X/Y/Z Sealed Bearings X/Y/Z Ballnut Mounts. Hardware X Axis Dust Cap. We will make exceptions if we are on the computer and working after that. Some large orders can take 2-3 weeks for processing. Sorry we do not accept personal checks due to the process of making sure they clear. Most important, we strive to have some of the best prices available and start all auctions as low as we can so that all have a chance to win. ProCutCNC has revolutionized the way hobbyists and fabricators get the job done. We are a great family business who can proudly display Made in the USA on every product. ProCutCNC Division of: Team Moto Inc. Brooklyn Park, MN Product Support: We offer support on our website contact page procutcnc. The item “PM-25MV CNC Mill Conversion Kit With DUBL BALL NUTS. 0015 BACKLASH ACCURACY” is in sale since Wednesday, March 27, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Other Metalworking Equipment”. The seller is “jr7k158″ and is located in Minneapolis, Minnesota. This item can be shipped to United States.

  • MPN: PM25-Kit
  • Brand: ProCutCNC
1. 08
2019

X2D (Little Machine Shop) cnc mill conversion kit with metal Y axis way cover

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , ,
X2D (Little Machine Shop) cnc mill conversion kit with metal Y axis way cover


X2D (Little Machine Shop) cnc mill conversion kit with metal Y axis way cover


X2D (Little Machine Shop) cnc mill conversion kit with metal Y axis way cover


X2D (Little Machine Shop) cnc mill conversion kit with metal Y axis way cover


X2D (Little Machine Shop) cnc mill conversion kit with metal Y axis way cover


X2D (Little Machine Shop) cnc mill conversion kit with metal Y axis way cover


3 C7 ball screws and ball nuts. 200 pitch (or metric equivalent). 3 helical zero backlash couplings (specify motor shaft diameter). 3 sets of thrust bearings. Anodizing available upon request. Y axis front way cover. Y Axis mounts on the left side of the headstock and column to provide easy access to gib adjustment screws on the right side of the headstock. The item “X2D (Little Machine Shop) cnc mill conversion kit with metal Y axis way cover” is in sale since Sunday, June 23, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “miccan-57″ and is located in Spring, Texas. This item can be shipped to United States.

  • Country/Region of Manufacture: China
  • Machine Type: Vertical Milling Machine
  • Power Source: Electric
  • Function: Drilling
  • Control: CNC
6. 07
2019

Belt Drive Conversion for Amadeal Real Bull XJ12-300 9512 Milling Machine

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , ,
Belt Drive Conversion for Amadeal Real Bull XJ12-300 9512 Milling Machine


Belt Drive Conversion Kit for the Amadeal XJ12 Milling Machine. Will fit the Real Bull XJ 9512 Milling Machine The conversion to belt drive is straightforward with no machining necessary and takes 30 minutes or so to complete. We recommend removal of the plastic hi/lo gears. The mill will run much more quietly and with higher spindle speeds. Bore Diameter of Spindle Pulley: 28mm. Bore Diameter of Motor Pulley: 10mm. Spacing between fixing screws in the base plate: 72mm. Top eBayer immer wieder gerne – T. Postal costs to customers in Italy will also be liable to a surcharge for items sent by post to cover the cost of’International Signed For’. The item “Belt Drive Conversion for Amadeal Real Bull XJ12-300 9512 Milling Machine” is in sale since Wednesday, February 14, 2018. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “harryuk123″ and is located in London, London. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

  • MPN: AMA-SP-XJ12-CONVKIT
  • Brand: Amadeal
16. 05
2019

Belt Drive Conversion for Amadeal Real Bull XJ12-300 9512 Milling Machine

Written by: admin - Posted in: belt - Tags: , , , , , , , ,
Belt Drive Conversion for Amadeal Real Bull XJ12-300 9512 Milling Machine



Belt Drive Conversion Kit for the Amadeal XJ12 Milling Machine. Will fit the Real Bull XJ 9512 Milling Machine The conversion to belt drive is straightforward with no machining necessary and takes 30 minutes or so to complete. We recommend removal of the plastic hi/lo gears. The mill will run much more quietly and with higher spindle speeds. Bore Diameter of Spindle Pulley: 28mm. Bore Diameter of Motor Pulley: 10mm. Spacing between fixing screws in the base plate: 72mm. Top eBayer immer wieder gerne – T. Costs to customers in Italy will also be liable to a surcharge for items sent by post to cover the cost of’International Signed For’. The item “Belt Drive Conversion for Amadeal Real Bull XJ12-300 9512 Milling Machine” is in sale since Thursday, April 12, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “harryuk123″ and is located in London, London. This item can be shipped to North, South, or Latin America, all countries in Europe, Japan, Australia.

  • MPN: AMA-SP-XJ12-CONVKIT
  • Brand: Amadeal
3. 11
2017

Bridgeport Knee Mill CNC Quill Kit, Conversion Kit

Written by: admin - Posted in: Uncategorized - Tags: , , , ,
Bridgeport Knee Mill CNC Quill Kit, Conversion Kit


The Bridgeport CNC Quill retrofit kit includes the mechanical components needed to convert the Z axis of your manual Bridgeport or Enco mill for CNC operation. All components are precision engineered and include the quill feed drive frame w/ size 34 motor mount, the ball screw and ball nut assembly, the motor and ball screw pulleys, the motor cover, and all needed bolts, dowels, and spacers. Ideally suited for use with the 34HT1275 motor (Order separately). The Bridgeport XY CNC retrofit kit includes the mechanical components needed to convert the X and Y axes of your manual Bridgeport, Jet, Enco or most any similar J-head type mill for CNC operation. All components are precision engineered. The kit includes (2) Size 42 motor mounting plates, (2) motor pulleys, (2) lead screw pulleys, (2) motor covers, (2) drive belts, and all required bolts, dowels, and spacers. For use with NEMA 42 size motors (Order separately). CNC Bridgeport Knee Conversion Kit. The Bridgeport Knee CNC retrofit kit includes the mechanical components needed to automate the knee of a manual Bridgeport, Jet, Enco or most any similar type milling machine for motorized control. Kit includes a size NEMA 42 motor mounting plate, motor pulleys, lead screw pulley, motor cover, drive belt, and all required bolts, dowels, and spacers. For use with NEMA 42 size motors. Variable Spindle Speed Kit, 2 and 3 HP. The Variable Spindle Speed kit includes the cabinet that mounts to the mill, a 2 or 3 HP VFD, emergency stop, variable speed control and electronic display as well as the necessary mounting hardware. 2HP Variable Speed Spindle Controller, LeGrande. 3 HP Variable Speed Spindle Controller, LeGrande. High Performance Ballscrew Kit. Upgrade your Bridgeport series 1 style knee mill with this precision-rolled ballscrew kit. The screw and nut assemblies are made of hardened steel for durability and long life. This ballscrew kit will provide a load life expectancy of 50 million inches of travel at an operating load of 400 pounds. The many advantages in this design over other products on the market include. Accuracy of +/. 003 per foot. Preloaded Ball Nuts- Each ball nut is preloaded to eliminate lost motion. This system stiffness provides faster response from a control command. This added stiffness also allows heavier cuts and climb milling thus increasing productivity. The preload is adjustable. This feature permits readjustment for wear and reduces the need for repair or future replacement. Brush-Type Wipers: Brush-type wipers, at the ends of each preloaded ball nut assembly, prevent entry of dirt and metal chips. Easy-Access Lubrication: Lubrication of ball nuts made easy through 5/32 holes in the flanges. These holes provide for attachment of existing lube tubing. Available lengths for the X axis are: 36″, 42″, and 48 (these refer to the table lengths). The Y axis selections are: 9″, 12″, and 16. Note that the Y axis length to select is the travel distance and not the table width. Bridgeport Ballscrew Kit 9 x 36. Bridgeport Ballscrew Kit 9 x 42. Bridgeport Ballscrew Kit 9 x 48. Bridgeport Ballscrew Kit 12 x 36. Bridgeport Ballscrew Kit 12 x 42. Bridgeport Ballscrew Kit 12 x 48. Bridgeport Ballscrew Kit 16 x 36. Bridgeport Ballscrew Kit 16 x 42. Bridgeport Ballscrew Kit 16 x 48. CNC Rack-Mount Control Systems for Full-Size Machines. A complete pre-engineered package to automate your full-size Bridgeport, Enco, or similar size knee mill. Just couple the motor shafts to your machine’s drive screws, plug in the cables, turn on the power, and install the software. You can immediately jog the motors by pressing Ctrl-J, and clicking on the X+, X-, Y+, Y-, Z+, and Z- buttons! It’s literally that easy! You can write simple part programs as well as use the built in wizards screens to generate programs for pockets and bolt hole circles. The drill holes can be simple down/up or with chip break cycles, chip clearing cycles etc… You can also use your favorite CAM program to generate complex 3D simultaneous surfacing machining tool paths. This same controller can also be used to automate a lathe. You would just use the TurnMaster Pro software. The 3 Axis version would also be able to control a tool turret. A tower orientation is available on request. DriveRack high performance power driver. Choice of motors Choose between. The 2 axis models are typically for lathes and come standard with (1) 34HT1275 and (1) 34HT750 motors. The 3 axis models are for Mills and come standard with (2) 42HT1700 and (1) 34HT1275 motors. All motors come with prewired armoured cables and locking circular connectors. G-code control & graphical software. All cables & illustrated manuals. 2 axis Rack Mount System- MN400. 3 axis Rack Mount System – MN400. 4 axis Rack Mount System – MN400. 2 axis Rack Mount Microstepping System- MN400. 3 axis Rack Mount Microstepping System- MN400. 4 axis Rack Mount Microstepping System- MN400. Engineering Quality CNC Components and Systems Since 1985. The item “Bridgeport Knee Mill CNC Quill Kit, Conversion Kit” is in sale since Friday, March 31, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “microkineticscnc” and is located in Kennesaw, Georgia. This item can be shipped worldwide.

  • Brand: MicroKinetics
  • MPN: 999-1000-101
  • Country/Region of Manufacture: United States
5. 07
2016

Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine

Written by: admin - Posted in: Uncategorized - Tags: , , , , , ,
Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine


Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine


Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine


Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine


Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine


Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine


Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine


Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine


Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine


Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine


Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine


Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine


Jet JMD-18 Mill/Drill CNC Conversion with Cabinet Stand. 11 piece R8 collet set 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4. 10 PC 4 flute HSS end mill set 3/16″x3/8″, 1/4″x3/8″, 5/16″x3/8″, 3/8″x3/8″, 7/16″x3/8″, 1/2″x1/2″, 9/16″x1/2″, 5/8″x5/8″, 11/16″x5/8″, 3/4″x3/4″. 58 piece clamp down set. Table T-Slot size: 5/8. Stud size: 1/2-13. Includes: 24 studs (4 pieces of each 3″, 4″, 5″, 6″, 7″, 8″ long), 6 step block pairs. 6 T-nuts, 6 flange nuts, 4 coupling nuts, 6 end hold-downs, Wall case. Adjustable Wrench with Measuring Scale, 10″ Overall Length, 1-3/8″ Jaw Capacity. 1/2 Square Drive High-Torque Ratchet Wrench. High-Torque Grip-Plus Combination Wrench, 3/4″ Size, 11″ Long. 1 Quart of MOBIL Vactra Way Oil #2. Swivel Leveling Mount, Nickel-Plated Steel, with Pad, 1/2″-13 x 4″ Long Thread, 3750 lb. High-Strength Grade 8 Steel Cap Screw, 3/4″-10 Thread, 6″ Long, Zinc-Plated. Zinc Yellow-Chromate Plated Steel Hex Nut, Grade 8, 3/4″-10 Thread Size, 1-1/8″ Wide, 41/64 High. Zinc Yellow-Chromate Plated Steel Flat Washer, Grade 8, Oversized, 3/4″ Screw Size, 0.812″ ID. JET Tools JMD-18 & JMD-18PF Operator’s Instructions and Parts Manual. I had intended to change it back to a manual mill and then sell the CNC components as I know very little about operation of CNC machinery. Let alone the software and hardware side. And before learning that the exorbitant prices of Jet OEM parts would make it cost prohibitive to convert back to manual. The machine appears to have been well maintained. I put a 110 plug to test out the motor. It looked to have to been hard wired, possibly to 220. It is very quiet and all the belts are in good shape. The X and Y axis have what appear to be some nice adjustable double ball nuts that have zero backlash when turned by hand. And the Z axis has a gas shock maintaining downward pressure also leaving zero backlash. The table has one spot were it looks like someone walked away from the machine while it was running, otherwise in good condition. I do not know what kind of software is needed to run this machine. The machine did not and does not come with a computer or data cables. Hopefully the photo of the “Geckodrive” cards can give some insight into what software is compatible for this machine. Feel free to ask any questions. 41″w x 39″d x 72h approximately. The item “Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine” is in sale since Thursday, June 30, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “plastic_organic” and is located in Los Angeles, California. This item can’t be shipped, the buyer must pick up the item.

  • Brand: Jet
  • MPN: JMD-18
  • Country/Region of Manufacture: Taiwan
  • Model: JMD-18
14. 10
2015

G8689 Grizzly Mini Milling Machine With X2 CNC Conversion Kit Parts & Plans / NEW

Written by: admin - Posted in: g8689 - Tags: , , , , , , ,
G8689 Grizzly Mini Milling Machine With X2 CNC Conversion Kit Parts & Plans / NEW


G8689 Grizzly Mini Milling Machine With X2 CNC Conversion Kit Parts & Plans / NEW


G8689 Grizzly Mini Milling Machine With X2 CNC Conversion Kit Parts & Plans / NEW


G8689 Grizzly Mini Milling Machine With X2 CNC Conversion Kit Parts & Plans / NEW


G8689 Grizzly Mini Milling Machine With X2 CNC Conversion Kit Parts & Plans / NEW


G8689 Grizzly Mini Milling Machine With X2 CNC Conversion Kit Parts & Plans / NEW


G8689 Grizzly Mini Milling Machine With X2 CNC Conversion Kit Parts & Plans / NEW


G8689 Grizzly Mini Milling Machine With X2 CNC Conversion Kit Parts & Plans / NEW


G8689 Grizzly Mini Milling Machine With X2 CNC Conversion Kit Parts & Plans / NEW


G8689 Grizzly Mini Milling Machine With X2 CNC Conversion Kit Parts & Plans / NEW


Now here is a Mini Milling Machine with the X2 Conversion Kit to a CNC Mini Mill Machine. That has more features than some Mill/Drills/CNC and is affordable for everyone! This little brute will handle any kind of job up to 1/2″ drilling, 1/2″ end mills and 1 facing. No belt changes necessary! The variable speed control and gear drive saves you time and hassleTruly a remarkable machine. Now you can have both pieces together, Brand new! Mint Condition and Unused! Cost varies depending on your location. Estimated size is 21″L x 20″W x 30H and around 175lbs with the X2 CNC conversion kit. Everything is Brand New / Unused and Uninstalled. You can see the conversion kit for the CNC is still in the box and wrapped. I decided to invest in 3D production tools. The item “G8689 Grizzly Mini Milling Machine With X2 CNC Conversion Kit Parts & Plans / NEW” is in sale since Tuesday, October 13, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “danny20″ and is located in Germantown, Maryland. This item can be shipped to United States.

  • Brand: Grizzly
  • Model: G8689 Mill X2 CNC Conversion Kit Parts & Plans
  • MPN: G8689
  • X2 CNC Conversion Kit W/Plans: X2 CNC Kit for Grizzly G8689
  • UPC: 690550086892
25. 11
2014

Sherline 6100 Horizontal Milling Conversion

Written by: admin - Posted in: Uncategorized - Tags: , , ,
Sherline 6100 Horizontal Milling Conversion


An easy way to increase the size of work that machined on your sherline 5000 or 5400-series mill is the addition. Of the horizontal milling conversion. By allowing the vertical column mounted in various positions in relation to the table, and with the. Headstock and spindle rotated 90° into the horizontal position, a.

Tremendous variety of machining possibilities are opened up. Mill can remain mounted to the conversion base and still operate in its.

Conventional vertical mode as well, providing a very sturdy and. The milling conversion is in good condition and includes all of the hardward to mount it to your mill.

The item “Sherline 6100 Horizontal Milling Conversion” is in sale since Sunday, November 23, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”.

The seller is “ajbrenn” and is located in Goshen, Indiana. This item can be shipped to United States.

Search this blog

Tag cloud