feed Subscribe to feed
pic
20. 10
2023

End Milling Cutter Steel Right Angle Shoulder Disc CNC Lathe Machining Center

Written by: admin - Posted in: milling - Tags: , , , , , , , , ,
End Milling Cutter Steel Right Angle Shoulder Disc CNC Lathe Machining Center



End Milling Cutter Steel Right Angle Shoulder Disc CNC Lathe Machining Center. Precaution for using cutting tools. Precariousness: Direct touch to a sharp cutting edge may cause injury. Countermeasures: When you set up tools to the machine or take tools out of the case, please wear protective gloves. Precariousness: Misuse or inappropriate working conditions may cause tool breakage or dispersion of broken pieces. Countermeasures:Please use safety item, such as safety glasses and protective gloves. Please use in the range of our recommended cutting condition. See our catalog or instruction manuals. Precariousness: Excessive impact or heavy wear will increase cutting resistance and may cause tool breakage and dispersion of broken pieces. Countermeasures: Please use safety item, such as safety glasses and protective gloves. Early exchanging tools is preferable. Precariousness: Dispersion of heated or prolonged chips may cause injury or burn. For chips removal, please stop the machine beforehand and use safety items, such as safety glasses and protectives gloves. Precariousness: Tools and materials reach high temperatures during cutting operation. Direct touch to the tools and materials shortly after cutting may cause burn. Precariousness: Sparks, generation of heat or chips in high temperature during operation may cause file. Countermeasures: Please do not operate around Hazardous zone, in which there is some possibility of fire or explosion. In case of using oil-coolant, please make sure there is sufficient fire-protection equipment. Precariousness: Lack of dynamic balance during high-speed revolutions leads to vibrations which can make the tool break. Please conduct test-operation before cutting, and confirm that there is no vibration or unusual sound. Precariousness: Direct touch to the burs which were generated on the rough surface of the workpiece may cause injury. Countermeasures: Do not touch the workpiece with bare hand. Precariousness: If the insert or other tool parts are not installed properly, they can fall down or break which may cause injuries. Countermeasures: Please clean up insert pockets or clamping parts before setting insert. Please set up inserts with supplied wrench only, and confirm that the inserts or parts are clamped completely. Never use inserts or parts other than those prescribed. Precariousness: If inserts are clamped too tightly by supplementary tools like pipe etc. Inserts or body may break. Countermeasures: Do not use aids such as pipes. Please set up using supplied wrench only. Precariousness: When tools are used in high-speed revolution, inserts or parts may burst out of the body due to centrifugal force. Countermeasures: Please use in the range of our recommended cutting condition. Accuracy and balance of machine spindle should be checked and adjusted regularly to prevent wear of the bearing due to eccentric rotation. Milling Cutters and other Cutting Tools. Precariousness: Since milling cutter have sharp edged, direct contact with bare hands may cause injury. Precariousness: If a cutter lack balance, the tool can start to vibrate. The dispersion of broken piece can cause injuries. Precariousness: When drilling a through-bore, it is possible that a disc is created during the drilling procedure that can fly out of the workpiece at a high speed. This is very dangerous since the disc has sharp edges. Countermeasures: Please use safety items, such as safety glasses and protective gloves. Also attach a cover on a chuck part. Precariousness: Dispersion of falling down of broken inserts may cause injury. Countermeasures:Please Check that the cutting inserts are brazed firmly before use. Please do not use brazed tools in the condition that requires high cutting temperature. Precariousness: If Brazing is carried out many times, the strength of carbide insert is deteriorated and can break easily during cutting. Countermeasures: Please do not use tools that have brazed several times. The quality of the tool deteriorates. Precariousness: The tools can only be used for the appropriate application. It may damage tools and machines. Countermeasures: Please follow our recommended usage for the tools. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging.

25. 04
2022

DIY CNC Fifth 5Axis A B Aixs Rotary Axis T Chuck Type Plate Disc Type 57 Stepper

Written by: admin - Posted in: fifth - Tags: , , , , , , , , ,
DIY CNC Fifth 5Axis A B Aixs Rotary Axis T Chuck Type Plate Disc Type 57 Stepper


Rotary Axis T Chuck Type. CNC 5 axis (A aixs, Rotary axis) T chuck type for cnc router cnc milling machine, best quality. 1: Dimensions 200 250 180. 2: A axis (fourth axis), 57 78 thick 4 wire stepper motor 3.5A current ratio of 1: 8. 3: B-axis (fifth axis), 57 stepper motor 3.5A current, coupling direct-attached. 4: Stainless steel dust cover. 5: Total weight 9.5KG. 6: Load-bearing workpiece 10KG. 7: Appearance anodized rust treatment. 8: 4-core aviation connector 1 = A +, 2 = A-, 3 = B +, 4 = B. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dembergear1″ and is located in this country: CN. This item can be shipped to United States, Canada, Australia.

  • Color: T Type
  • Ships From: China
  • Model: DIY CNC 5th Fifth 5Axis A
  • Modified Item: No
  • Spindle Horsepower: Less than 1 hp
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Machine Type: Milling Machine
  • Table Length: DIY CNC Fifth 5Axis
  • Max Spindle Speed (RPM): DIY CNC Fifth 5Axis
  • Model Year: 2020
  • Power Source: Electric
  • X-Axis Travel Bed: DIY CNC Fifth 5Axis
  • Y-Axis Travel Bed: DIY CNC Fifth 5Axis
  • Z-Axis Travel Bed: DIY CNC Fifth 5Axis
  • MPN: 6407660983
  • Spindle Taper: CAT 50
  • Feature 5: 5axis
  • Function: Milling
  • Feature 6: 5 aixs
  • Feature 7: A axis
  • Feature 8: Cnc axis
  • Number of Jaws: 4
  • Origin: CN(Origin)
  • Power: Electric
  • Brand: Unbranded
  • Certification: CE
  • Feature 1: 5th axis
  • Feature 2: Fifth axis
  • Feature 3: B aixs
  • Table Width: DIY CNC Fifth 5Axis
  • Feature 4: DIY CNC Rotary axis
  • Control: CNC
  • Voltage: 220 V
3. 08
2020

6 Tooth 90mm 16mm Wood Carving Disc Tool Angle Grinder Accessories Milling Cutter Flat Type Fit Fo

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , , , , , , ,

14. 07
2019

Top Three Teeth Woodworking Plane Wood Carving Disc Tool Milling Cutter For 16mm Aperture Angle Gri

Written by: admin - Posted in: three - Tags: , , , , , , , , , , , ,

Search this blog