feed Subscribe to feed
pic
23. 03
2022

Endmill Fundamentals

Written by: admin - Posted in: endmill - Tags: ,

19. 03
2022

1/4 Dia. 2 Flute Downcut CNC Endmill 10 Pack 1/4 Shank Yonico 32216-SC-10PK

Written by: admin - Posted in: flute - Tags: , , , , , ,
1/4 Dia. 2 Flute Downcut CNC Endmill 10 Pack 1/4 Shank Yonico 32216-SC-10PK


1/4 Dia. 2 Flute Downcut CNC Endmill 10 Pack 1/4 Shank Yonico 32216-SC-10PK



2 Flute Downcut Spiral End Mill CNC Router Bit (10 Pack) – 1/4 Shank – Yonico 32216-SC-10PK. Best used for: Laminate or veneer-finish plunging and dadoing. Cutting Diameter: 1/4″. Cutting Height: 1″. Shank Diameter: 1/4″. Overall Length: 2-1/2″. Flutes: 2 Down cut endmills shear in a downward direction causing the uppermost layer of the material to be pressed down against the material just below it. This motion leaves a perfectly clean top surface edge. A concentration of wood chips in the work path will occur. Hose away excess wood chips to prevent bit breakage. Down cut CNC end mills are great for dado, pocket and inlay work as well as the final pass on most projects. These bits are especially useful when routing material such as melamine and plywood. Down cut spiral bits are designed to produce perfectly clean edges on the top face of the work piece but since the bit’s geometry causes the wood chips to travel in a downward direction, which will cause the tool path to be obstructed, it should only be used in applications where the desired finish is required. That means that your order will be at your door in no time. Our 40,000+ reviews give you the assurance that our quality and service is right at the top. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Supplies\Other Woodworking Supplies”. The seller is “yonico” and is located in this country: US. This item can be shipped worldwide.

  • Brand: Yonico
  • MPN: 32216-SC-10PK
  • UPC: 603915004219
  • Manufacturer: Yonico
  • Type: 2 Flute Downcut Spiral End Mill CNC Router Bit
  • Item Diameter: 1/4\
  • Cutting Length: 1\
  • Number of Flutes: 2
  • Material: Solid Carbide
  • Item Length: 2-1/2\
  • Shank Size: 1/4\
3. 01
2022

Kennametal 1.50 1-1/2 Indexable Endmill for ADKT inserts #1076395R00 (LOC190)

Written by: admin - Posted in: kennametal - Tags: , , , , , , ,
Kennametal 1.50 1-1/2 Indexable Endmill for ADKT inserts #1076395R00 (LOC190)


Kennametal 1.50 1-1/2 Indexable Endmill for ADKT inserts #1076395R00 (LOC190)


Kennametal 1.50 1-1/2 Indexable Endmill for ADKT inserts #1076395R00 (LOC190)


Kennametal 1.50 1-1/2 Indexable Endmill for ADKT inserts #1076395R00 (LOC190)


Kennametal 1.50 1-1/2 Indexable Endmill for ADKT inserts #1076395R00 (LOC190)


Kennametal 1.50″ 1-1/2″ Indexable Endmill for ADKT inserts #1076395R00 (LOC190). This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “superiormachinetools” and is located in this country: US. This item can be shipped worldwide.

  • Brand: Kennametal
  • MPN: 1076395R00
  • Overall Length: 8\
  • Cutting Diameter: 1.50\
  • Shank Diameter: 1.50\
  • Coolant Through: No
  • Insert Type: ADKT2328….
  • Warehouse Location: LOC190
8. 09
2021

Lot of 48 CAT 40 EndMill Tool Holders CNC Fadal Haas VF2 VF3 Mill Lista Cabinet

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , ,
Lot of 48 CAT 40 EndMill Tool Holders CNC Fadal Haas VF2 VF3 Mill Lista Cabinet


Lot of 48 CAT 40 EndMill Tool Holders CNC Fadal Haas VF2 VF3 Mill Lista Cabinet


Lot of 48 CAT 40 EndMill Tool Holders CNC Fadal Haas VF2 VF3 Mill Lista Cabinet


Lot of 48 CAT 40 EndMill Tool Holders CNC Fadal Haas VF2 VF3 Mill Lista Cabinet


Lot of 48 CAT 40 EndMill Tool Holders CNC Fadal Haas VF2 VF3 Mill Lista Cabinet


Lot of 48 CAT 40 EndMill Tool Holders CNC Fadal Haas VF2 VF3 Mill Lista Cabinet


Lot of 48 CAT 40 EndMill Tool Holders CNC Fadal Haas VF2 VF3 Mill Lista Cabinet


Lot of 48 CAT 40 EndMill Tool Holders CNC Fadal Haas VF2 VF3 Mill Lista Cabinet


Lot of 48 CAT 40 EndMill Tool Holders for CNC FADAL. Haas VF2 VF3 VF4. The item “Lot of 48 CAT 40 EndMill Tool Holders CNC Fadal Haas VF2 VF3 Mill Lista Cabinet” is in sale since Friday, April 23, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amiron_machinery” and is located in Oxnard, California. This item can’t be shipped, the buyer must pick up the item.

  • Spindle Taper: CAT 40
  • Function: Milling
  • Brand: Haas
  • Control: CNC
2. 07
2021

Lot of 48 CAT 40 EndMill Tool Holder for CNC Fadal Haas VF2 VF3 VF4 Mill With Cart

Written by: admin - Posted in: Uncategorized - Tags: , , , , , ,
Lot of 48 CAT 40 EndMill Tool Holder for CNC Fadal Haas VF2 VF3 VF4 Mill With Cart


Lot of 48 CAT 40 EndMill Tool Holder for CNC Fadal Haas VF2 VF3 VF4 Mill With Cart


Lot of 48 CAT 40 EndMill Tool Holder for CNC Fadal Haas VF2 VF3 VF4 Mill With Cart


Lot of 48 CAT 40 EndMill Tool Holder for CNC Fadal Haas VF2 VF3 VF4 Mill With Cart


Lot of 48 CAT 40 EndMill Tool Holder for CNC Fadal Haas VF2 VF3 VF4 Mill With Cart


Lot of 48 CAT 40 EndMill Tool Holder for CNC Fadal Haas VF2 VF3 VF4 Mill With Cart


Lot of 48 CAT 40 EndMill Tool Holder for CNC Fadal Haas VF2 VF3 VF4 Mill With Cart


Lot of 48 CAT 40 EndMill Tool Holders for CNC FADAL. Haas VF2 VF3 VF4. With HUOT TOOLSCOOT Cart. The item “Lot of 48 CAT 40 EndMill Tool Holder for CNC Fadal Haas VF2 VF3 VF4 Mill With Cart” is in sale since Monday, April 12, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amiron_machinery” and is located in Oxnard, California. This item can’t be shipped, the buyer must pick up the item.

  • Spindle Taper: CAT 40
  • Function: Milling
  • Brand: Haas
  • Control: CNC
21. 12
2020

Lot of 60 CAT40 EndMill Tool Holders for CNC Haas VF2 VF3 VF4 VMC Milling Cutter

Written by: admin - Posted in: cat40 - Tags: , , , , , ,
Lot of 60 CAT40 EndMill Tool Holders for CNC Haas VF2 VF3 VF4 VMC Milling Cutter


Lot of 60 CAT40 EndMill Tool Holders for CNC Haas VF2 VF3 VF4 VMC Milling Cutter


Lot of 60 CAT40 EndMill Tool Holders for CNC Haas VF2 VF3 VF4 VMC Milling Cutter


Lot of 60 CAT40 EndMill Tool Holders for CNC Haas VF2 VF3 VF4 VMC Milling Cutter


Lot of 60 CAT40 EndMill Tool Holders for CNC Haas VF2 VF3 VF4 VMC Milling Cutter


Lot of 60 CAT40 EndMill Tool Holders for CNC Haas VF2 VF3 VF4 VMC Milling Cutter


Lot of 60 CAT40 EndMill Tool Holders for CNC Haas VF2 VF3 VF4 VMC Milling Cutter


Lot of 60 CAT40 EndMill Tool Holders for CNC Haas VF2 VF3 VF4 VMC Milling Cutter



Lot of 60 CAT40 EndMill Tool Holders for CNC Haas VF2 VF3 VF4 VMC Milling Cutters, End Mills, Drill Bits, Collets Etc… Please see pictures for additional details. The item “Lot of 60 CAT40 EndMill Tool Holders for CNC Haas VF2 VF3 VF4 VMC Milling Cutter” is in sale since Sunday, January 12, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amiron11″ and is located in Oxnard, California. This item can’t be shipped, the buyer must pick up the item.

27. 07
2020

Desktop CNC mill with 20,000 RPM 8mm Endmill

Written by: admin - Posted in: Uncategorized - Tags: , ,
Desktop CNC mill with 20,000 RPM 8mm Endmill


Desktop CNC mill with 20,000 RPM 8mm Endmill


Desktop CNC mill with 20,000 RPM 8mm Endmill


Desktop CNC mill with 20,000 RPM 8mm Endmill


Desktop CNC mill with 20,000 RPM 8mm Endmill


Desktop CNC mill with 20,000 RPM 8mm Endmill


Micro 70 Proxxon smallest desktop CNC imported from Germany. You can add on automation as you like sky is the limit you can do. The item “Desktop CNC mill with 20,000 RPM 8mm Endmill” is in sale since Saturday, December 21, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “meddev” and is located in San Mateo, California. This item can be shipped to United States.

  • Function: Milling
  • Brand: Proxxon
  • Control: CNC
31. 07
2019

Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , , ,
Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram System (Model: 01-000). Square the head of a milling machine quickly and easily. To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Indicator graduations available in 0.001″ and 0.0005″. Shank sizes available in 1/2″ and 3/8″. Large 2.2 easy to read indicator face. Indicator repeatability of 0.0002. Body made from red anodized aluminum. Includes calibration gage, manual and padded case. Also available is our Mini Pro Tram System designed specifically for smaller Table Top and Mini mills. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate. Tramming is the process of squaring the head of your milling machine to the table. The Pro Tram is sized to fit the bed of a 6 vise allowing you to tram directly to vise for increased accuracy. It can be used with a sine bar or sine plate to adjust the head to precise angles. Protected by one or more US patents. Please request a package invoice before you pay. We guarantee that the Pro Tram System will allow you to tram your machine with the same or better accuracy as compared to conventional tramming techniques. We also guarantee that you will be able to complete the tramming procedure with less time and effort. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01″ is in sale since Wednesday, April 17, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “edge_products” and is located in Eagle, Idaho. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

  • Model: Pro Tram System 1/2″ Shank – 0.001 Graduation
  • MPN: 01-000
  • Brand: Edge Technology
  • Used With: Bridgeport Mills CNC Router Knee Mill Endmill
  • Used For: Tramming or Square Spindle milling machine head
24. 01
2019

Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , , ,
Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01



Pro Tram System (Model: 01-000). Square the head of a milling machine quickly and easily. To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Indicator graduations available in 0.001″ and 0.0005″. Shank sizes available in 1/2″ and 3/8″. Large 2.2 easy to read indicator face. Indicator repeatability of 0.0002. Body made from red anodized aluminum. Includes calibration gage, manual and padded case. Also available is our Mini Pro Tram System designed specifically for smaller Table Top and Mini mills. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate. Tramming is the process of squaring the head of your milling machine to the table. The Pro Tram is sized to fit the bed of a 6 vise allowing you to tram directly to vise for increased accuracy. It can be used with a sine bar or sine plate to adjust the head to precise angles. Protected by one or more US patents. Please request a package invoice before you pay. We guarantee that the Pro Tram System will allow you to tram your machine with the same or better accuracy as compared to conventional tramming techniques. We also guarantee that you will be able to complete the tramming procedure with less time and effort. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01″ is in sale since Wednesday, January 16, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “edge_products” and is located in Eagle, Idaho. This item can be shipped to United States.

  • Model: Pro Tram System 1/2″ Shank – 0.001 Graduation
  • MPN: 01-000
  • Brand: Edge Technology
  • Used With: Bridgeport Mills CNC Router Knee Mill Endmill
  • Used For: Tramming or Square Spindle milling machine head
28. 12
2018

Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01

Written by: admin - Posted in: Uncategorized - Tags: , , , , , , , , ,
Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01


Pro Tram System (Model: 01-000). Square the head of a milling machine quickly and easily. To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Indicator graduations available in 0.001″ and 0.0005″. Shank sizes available in 1/2″ and 3/8″. Large 2.2 easy to read indicator face. Indicator repeatability of 0.0002. Body made from red anodized aluminum. Includes calibration gage, manual and padded case. Also available is our Mini Pro Tram System designed specifically for smaller Table Top and Mini mills. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate. Tramming is the process of squaring the head of your milling machine to the table. The Pro Tram is sized to fit the bed of a 6 vise allowing you to tram directly to vise for increased accuracy. It can be used with a sine bar or sine plate to adjust the head to precise angles. Protected by one or more US patents. Please request a package invoice before you pay. We guarantee that the Pro Tram System will allow you to tram your machine with the same or better accuracy as compared to conventional tramming techniques. We also guarantee that you will be able to complete the tramming procedure with less time and effort. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01″ is in sale since Monday, December 17, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “edge_products” and is located in Eagle, Idaho. This item can be shipped to United States.

  • Model: Pro Tram System 1/2″ Shank – 0.001 Graduation
  • MPN: 01-000
  • Brand: Edge Technology
  • Used With: Bridgeport Mills CNC Router Knee Mill Endmill
  • Used For: Tramming or Square Spindle milling machine head

Search this blog