4 Axis 1500W VFD. 4 Axis 2200W VFD. Spindle motor: 2200W high-speed variable frequency spindle motor, ER11 chuck, matching 6mm bur. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point.

4 Axis 1500W VFD. 4 Axis 2200W VFD. Spindle motor: 2200W high-speed variable frequency spindle motor, ER11 chuck, matching 6mm bur. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point.

CNC Router 2200W VFD Milling Engraving Machine 6090 4-Axis Cutting &Handwheel. Waterproof design, very durable, anti-dirt, oil spray. Power by USB port. Dimensions: 22 x 8 x 3cm. The usb self-check light, you can type the ” scroll” on the keyboard to activate it. Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A. Feed rate control: F+, F. Jog rate: J+, J. Spindle speed: speed up, slow down. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point. 4 Axis 1500W VFD. CNC Router engraving machine parameters. Outside dimension:1150970650mm(LWH). Working platform size:1045720mm(LW). The whole machine used 6061 aluminum profiles. Feeding height:? 140mm(From base of Z axis to platform). X, Y, Z Working Area:900(Y)600(X)140mm(Z). Y axis:SFU1605 Ball Screws. Z axis:SFU1204 Ball Screws. X axis:ø20 High intensity round rail. Y axis: SBRø20 high-strength aluminum base rails. Z axis: ø12 high-strength round rail. 57 two-phase 3A (with handwheels). Driving Power for Stepping motor. AC110, 240W, out put:DC24V10A. Maximum Idle speed:1500mm/min. Working Speed :50-1500mm / min (different material with different speed settings). Spindle motor:1500W high-speed variable frequency spindle motor, ER11 chuck, with 6mm collet. 1, The spindle motor must connect with the VFD. 2, It cannot directly connect with the supply voltage (AC110V/220V). 3, Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Drive of Stepping motor:0-3.5A adjustable four-axis drive. (TB6560AHQ chip, 24V power supply, 2,4,8,16 subdivision can be set, factory settings 8 subdivision). Repositioning precision:? 0.05mm. Spindle precision:Radial runout? 0.03mm. Carving command:G code / TAB file / nc file / NCC file. VFD:AC220V, 1500W, 0-400Hz (built-in control box). USB Control box parameters. Protection:Emergency stop button. Support system:Windows XP / win7 with 32bite. Sculpture, round carving, wooden handicraft processing. Advertising signs, logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry, such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter, making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet. 1.5KW water-cooled VFD. Is available operating for long time, which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood. 2, water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a USB port output. Place the control box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Damage the driver of the controller. Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. You can enjoy making you dream with using our CNC machine now. 4 Axis 2200W VFD. 1X main unit (Frame). 1X main unit (working base). 1X Sinal cable for A axis. 10X 47mm round head. 6X 410mm black Inner six angle screw with nut. 8X 520mm black Inner six angle screw. 4X 58mm Flat Philip’s head screw with nut and gasket. 8X 624mm BALCK FLAT Inner six angle screw. 2X six angle Wrench(3mm). 2X six angle Wrench(4mm). 1x Tools Setting Auto-Check Instrument for CNC. Outside dimension:1150x970x650mm(LxWxH). Working platform size:1045x720mm(LxW). The Communication interface of the control box is USB Port, this machine can only work with Win XP 32Bit / Win 7 32Bit / Win XP 64 Bit / Win 7 64 Bit PC system. Frame Material:The whole machine used 6061 aluminum profiles. X, Y, Z Working Area:600x900x150mm. Stepping motor:two-phase 3A (with hand wheels). Driving Power for Stepping motor:AC110,240W, Output DC24V10A. Maximum Idle speed:1500mm/m. Working Speed:50-1500mm/min (different material with different speed settings). High-speed variable frequency spindle motor, ER11 chuck, matching 6mm bur. Variable-frequency Drive(VFD):AC110V, 2200W, 0-400Hz(built-in Control box). Drive of Stepping motor 0-3.5A adjustable four-axis driveTB6560AHQchip, 24V power supply, 2,4,8,16Subdivision settings, Factory. Cooling method:Water cooling, Matching heat dissipation water pump. Carving command:G code/TAB file/nc/TAB /NCC/file. Gross weight of machine :About 145kg/320lb. Update function: with limit switch. Logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. 2.2KW water-cooled VFD. 3, High quality accurate ball Screws drive make the engraving more precision. 3 Axis 1500W VFD. Router engraving machine parameters. Drive of Stepping motor:0-3.5A adjustable three-axis drive. VFD:AC110V, 1500W, 0-400Hz (built-in control box). Communication interface:through USB PORT connect with computer. Anti-black flash, high precision, long life circle. Assembling and locating the machine on steady desk well. Connecting the control box with the machine and you computer and make sure the plug will not come off. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z). Otherwise, It will damage the driver of the controller. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Drilling, Milling, Engraving, Cutting, Carving.

CNC Router 2200W VFD Milling Engraving Machine 6090 4-Axis Cutting &Handwheel. Waterproof design, very durable, anti-dirt, oil spray. Power by USB port. Dimensions: 22 x 8 x 3cm. The usb self-check light, you can type the ” scroll” on the keyboard to activate it. Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A. Feed rate control: F+, F. Jog rate: J+, J. Spindle speed: speed up, slow down. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point. 4 Axis 1500W VFD. CNC Router engraving machine parameters. Outside dimension:1150970650mm(LWH). Working platform size:1045720mm(LW). The whole machine used 6061 aluminum profiles. Feeding height:? 140mm(From base of Z axis to platform). X, Y, Z Working Area:900(Y)600(X)140mm(Z). Y axis:SFU1605 Ball Screws. Z axis:SFU1204 Ball Screws. X axis:ø20 High intensity round rail. Y axis: SBRø20 high-strength aluminum base rails. Z axis: ø12 high-strength round rail. 57 two-phase 3A (with handwheels). Driving Power for Stepping motor. AC110, 240W, out put:DC24V10A. Maximum Idle speed:1500mm/min. Working Speed :50-1500mm / min (different material with different speed settings). Spindle motor:1500W high-speed variable frequency spindle motor, ER11 chuck, with 6mm collet. 1, The spindle motor must connect with the VFD. 2, It cannot directly connect with the supply voltage (AC110V/220V). 3, Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Drive of Stepping motor:0-3.5A adjustable four-axis drive. (TB6560AHQ chip, 24V power supply, 2,4,8,16 subdivision can be set, factory settings 8 subdivision). Repositioning precision:? 0.05mm. Spindle precision:Radial runout? 0.03mm. Carving command:G code / TAB file / nc file / NCC file. VFD:AC220V, 1500W, 0-400Hz (built-in control box). USB Control box parameters. Protection:Emergency stop button. Support system:Windows XP / win7 with 32bite. Sculpture, round carving, wooden handicraft processing. Advertising signs, logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry, such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter, making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet. 1.5KW water-cooled VFD. Is available operating for long time, which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood. 2, water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a USB port output. Place the control box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Damage the driver of the controller. Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. You can enjoy making you dream with using our CNC machine now. 4 Axis 2200W VFD. 1X main unit (Frame). 1X main unit (working base). 1X Sinal cable for A axis. 10X 47mm round head. 6X 410mm black Inner six angle screw with nut. 8X 520mm black Inner six angle screw. 4X 58mm Flat Philip’s head screw with nut and gasket. 8X 624mm BALCK FLAT Inner six angle screw. 2X six angle Wrench(3mm). 2X six angle Wrench(4mm). 1x Tools Setting Auto-Check Instrument for CNC. Outside dimension:1150x970x650mm(LxWxH). Working platform size:1045x720mm(LxW). The Communication interface of the control box is USB Port, this machine can only work with Win XP 32Bit / Win 7 32Bit / Win XP 64 Bit / Win 7 64 Bit PC system. Frame Material:The whole machine used 6061 aluminum profiles. X, Y, Z Working Area:600x900x150mm. Stepping motor:two-phase 3A (with hand wheels). Driving Power for Stepping motor:AC110,240W, Output DC24V10A. Maximum Idle speed:1500mm/m. Working Speed:50-1500mm/min (different material with different speed settings). High-speed variable frequency spindle motor, ER11 chuck, matching 6mm bur. Variable-frequency Drive(VFD):AC110V, 2200W, 0-400Hz(built-in Control box). Drive of Stepping motor 0-3.5A adjustable four-axis driveTB6560AHQchip, 24V power supply, 2,4,8,16Subdivision settings, Factory. Cooling method:Water cooling, Matching heat dissipation water pump. Carving command:G code/TAB file/nc/TAB /NCC/file. Gross weight of machine :About 145kg/320lb. Update function: with limit switch. Logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. 2.2KW water-cooled VFD. 3, High quality accurate ball Screws drive make the engraving more precision. 3 Axis 1500W VFD. Router engraving machine parameters. Drive of Stepping motor:0-3.5A adjustable three-axis drive. VFD:AC110V, 1500W, 0-400Hz (built-in control box). Communication interface:through USB PORT connect with computer. Anti-black flash, high precision, long life circle. Assembling and locating the machine on steady desk well. Connecting the control box with the machine and you computer and make sure the plug will not come off. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z). Otherwise, It will damage the driver of the controller. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Drilling, Milling, Engraving, Cutting, Carving.

CNC Router 2200W VFD Milling Engraving Machine 6090 4-Axis Cutting &Handwheel. Waterproof design, very durable, anti-dirt, oil spray. Power by USB port. Dimensions: 22 x 8 x 3cm. The usb self-check light, you can type the ” scroll” on the keyboard to activate it. Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A. Feed rate control: F+, F. Jog rate: J+, J. Spindle speed: speed up, slow down. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point. 4 Axis 1500W VFD. CNC Router engraving machine parameters. Outside dimension:1150970650mm(LWH). Working platform size:1045720mm(LW). The whole machine used 6061 aluminum profiles. Feeding height:? 140mm(From base of Z axis to platform). X, Y, Z Working Area:900(Y)600(X)140mm(Z). Y axis:SFU1605 Ball Screws. Z axis:SFU1204 Ball Screws. X axis:ø20 High intensity round rail. Y axis: SBRø20 high-strength aluminum base rails. Z axis: ø12 high-strength round rail. 57 two-phase 3A (with handwheels). Driving Power for Stepping motor. AC110, 240W, out put:DC24V10A. Maximum Idle speed:1500mm/min. Working Speed :50-1500mm / min (different material with different speed settings). Spindle motor:1500W high-speed variable frequency spindle motor, ER11 chuck, with 6mm collet. 1, The spindle motor must connect with the VFD. 2, It cannot directly connect with the supply voltage (AC110V/220V). 3, Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Drive of Stepping motor:0-3.5A adjustable four-axis drive. (TB6560AHQ chip, 24V power supply, 2,4,8,16 subdivision can be set, factory settings 8 subdivision). Repositioning precision:? 0.05mm. Spindle precision:Radial runout? 0.03mm. Carving command:G code / TAB file / nc file / NCC file. VFD:AC220V, 1500W, 0-400Hz (built-in control box). USB Control box parameters. Protection:Emergency stop button. Support system:Windows XP / win7 with 32bite. Sculpture, round carving, wooden handicraft processing. Advertising signs, logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry, such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter, making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet. 1.5KW water-cooled VFD. Is available operating for long time, which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood. 2, water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a USB port output. Place the control box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Damage the driver of the controller. Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. You can enjoy making you dream with using our CNC machine now. 4 Axis 2200W VFD. 1X main unit (Frame). 1X main unit (working base). 1X Sinal cable for A axis. 10X 47mm round head. 6X 410mm black Inner six angle screw with nut. 8X 520mm black Inner six angle screw. 4X 58mm Flat Philip’s head screw with nut and gasket. 8X 624mm BALCK FLAT Inner six angle screw. 2X six angle Wrench(3mm). 2X six angle Wrench(4mm). 1x Tools Setting Auto-Check Instrument for CNC. Outside dimension:1150x970x650mm(LxWxH). Working platform size:1045x720mm(LxW). The Communication interface of the control box is USB Port, this machine can only work with Win XP 32Bit / Win 7 32Bit / Win XP 64 Bit / Win 7 64 Bit PC system. Frame Material:The whole machine used 6061 aluminum profiles. X, Y, Z Working Area:600x900x150mm. Stepping motor:two-phase 3A (with hand wheels). Driving Power for Stepping motor:AC110,240W, Output DC24V10A. Maximum Idle speed:1500mm/m. Working Speed:50-1500mm/min (different material with different speed settings). High-speed variable frequency spindle motor, ER11 chuck, matching 6mm bur. Variable-frequency Drive(VFD):AC110V, 2200W, 0-400Hz(built-in Control box). Drive of Stepping motor 0-3.5A adjustable four-axis driveTB6560AHQchip, 24V power supply, 2,4,8,16Subdivision settings, Factory. Cooling method:Water cooling, Matching heat dissipation water pump. Carving command:G code/TAB file/nc/TAB /NCC/file. Gross weight of machine :About 145kg/320lb. Update function: with limit switch. Logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. 2.2KW water-cooled VFD. 3, High quality accurate ball Screws drive make the engraving more precision. 3 Axis 1500W VFD. Router engraving machine parameters. Drive of Stepping motor:0-3.5A adjustable three-axis drive. VFD:AC110V, 1500W, 0-400Hz (built-in control box). Communication interface:through USB PORT connect with computer. Anti-black flash, high precision, long life circle. Assembling and locating the machine on steady desk well. Connecting the control box with the machine and you computer and make sure the plug will not come off. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z). Otherwise, It will damage the driver of the controller. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Drilling, Milling, Engraving, Cutting, Carving.

1.5/2.2KW 3/4Axis CNC6090 Router Engraving 3D Carving Milling Drill Machine USB. Waterproof design, very durable, anti-dirt, oil spray. Power by USB port. Dimensions: 22 x 8 x 3cm. The usb self-check light, you can type the ” scroll” on the keyboard to activate it. Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A. Feed rate control: F+, F. Jog rate: J+, J. Spindle speed: speed up, slow down. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point. 4 Axis 1500W VFD. CNC Router engraving machine parameters. Outside dimension:1150970650mm(LWH). Working platform size:1045720mm(LW). The whole machine used 6061 aluminum profiles. Feeding height:? 140mm(From base of Z axis to platform). X, Y, Z Working Area:900(Y)600(X)140mm(Z). Y axis:SFU1605 Ball Screws. Z axis:SFU1204 Ball Screws. X axis:ø20 High intensity round rail. Y axis: SBRø20 high-strength aluminum base rails. Z axis: ø12 high-strength round rail. 57 two-phase 3A (with handwheels). Driving Power for Stepping motor. AC110, 240W, out put:DC24V10A. Maximum Idle speed:1500mm/min. Working Speed :50-1500mm / min (different material with different speed settings). Spindle motor:1500W high-speed variable frequency spindle motor, ER11 chuck, with 6mm collet. 1, The spindle motor must connect with the VFD. 2, It cannot directly connect with the supply voltage (AC110V/220V). 3, Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Drive of Stepping motor:0-3.5A adjustable four-axis drive. (TB6560AHQ chip, 24V power supply, 2,4,8,16 subdivision can be set, factory settings 8 subdivision). Repositioning precision:? 0.05mm. Spindle precision:Radial runout? 0.03mm. Carving command:G code / TAB file / nc file / NCC file. VFD:AC220V, 1500W, 0-400Hz (built-in control box). USB Control box parameters. Protection:Emergency stop button. Support system:Windows XP / win7 with 32bite. Sculpture, round carving, wooden handicraft processing. Advertising signs, logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry, such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter, making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet. 1.5KW water-cooled VFD. Is available operating for long time, which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood. 2, water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a USB port output. Place the control box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Damage the driver of the controller. Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. You can enjoy making you dream with using our CNC machine now. 4 Axis 2200W VFD. 1X main unit (Frame). 1X main unit (working base). 1X Sinal cable for A axis. 10X 47mm round head. 6X 410mm black Inner six angle screw with nut. 8X 520mm black Inner six angle screw. 4X 58mm Flat Philip’s head screw with nut and gasket. 8X 624mm BALCK FLAT Inner six angle screw. 2X six angle Wrench(3mm). 2X six angle Wrench(4mm). 1x Tools Setting Auto-Check Instrument for CNC. Outside dimension:1150x970x650mm(LxWxH). Working platform size:1045x720mm(LxW). The Communication interface of the control box is USB Port, this machine can only work with Win XP 32Bit / Win 7 32Bit / Win XP 64 Bit / Win 7 64 Bit PC system. Frame Material:The whole machine used 6061 aluminum profiles. X, Y, Z Working Area:600x900x150mm. Stepping motor:two-phase 3A (with hand wheels). Driving Power for Stepping motor:AC110,240W, Output DC24V10A. Maximum Idle speed:1500mm/m. Working Speed:50-1500mm/min (different material with different speed settings). High-speed variable frequency spindle motor, ER11 chuck, matching 6mm bur. Variable-frequency Drive(VFD):AC110V, 2200W, 0-400Hz(built-in Control box). Drive of Stepping motor 0-3.5A adjustable four-axis driveTB6560AHQchip, 24V power supply, 2,4,8,16Subdivision settings, Factory. Cooling method:Water cooling, Matching heat dissipation water pump. Carving command:G code/TAB file/nc/TAB /NCC/file. Gross weight of machine :About 145kg/320lb. Update function: with limit switch. Logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. 2.2KW water-cooled VFD. 3, High quality accurate ball Screws drive make the engraving more precision. 3 Axis 1500W VFD. Router engraving machine parameters. Drive of Stepping motor:0-3.5A adjustable three-axis drive. VFD:AC110V, 1500W, 0-400Hz (built-in control box). Communication interface:through USB PORT connect with computer. Anti-black flash, high precision, long life circle. Assembling and locating the machine on steady desk well. Connecting the control box with the machine and you computer and make sure the plug will not come off. Don’t suspended the cable which connect the Spindle motor with axis(X, Y, Z). Otherwise, It will damage the driver of the controller. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. Drilling, Milling, Engraving, Cutting, Carving.

Product Information: Name: Electroplated round cast iron handwheel Surface plating treatment, smooth, beautiful, rust-proof, durable. This handwheel is a cast iron part, bubbles will appear during casting, causing trachoma and pitting, and there will be shades of color when sprayed with chrome. Our handwheels and handles have a variety of styles, complete sizes, good quality, and a large number of stock. Package Including: According to your choice. Other accessories are not included. Electroplated round cast iron handwheel. Surface plating treatment, smooth, beautiful, rust-proof, durable. According to your choice.

DDCS V4.1 4Axis Offline Control Box System with MPG Handwheel Hybrid Servo Motor. DDCS V4.1 4Axis Offline Control Box System with MPG Handwheel. DDCS V4.1 4Axis Offline Control Box as Picture Shown. MPG Handwheel as Picture Shown. Hardware Configuration inside this Control Box. 1x 4 channel relay module. 1x 24V 50W switch power supply. 1x 1.5KW 220V VFD. 1x Single phase two-stage filter for VFD. 1x Sindle phase single-stage filter for main power supply. 3x Noiseless DC Cooling fan. 1x BH57 4Axis module. 1x 800W main power supply (Optional). 36V use for Intergrated Hybrid Servo Motor. 48V use for Split Hybrid Servo Motor. Tips: Most Internal cables and modules inside this control box have been pre-connected, just follow our instruction to simply plug this box and it can work for your machine!

Acu-Rite Auto Retracting Handwheels (2 Handwheels). Fits G2, MPII and most mills with 5/8″ Bore x 1/8″ Key. Handle retracts when released. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “moonracer1504″ and is located in this country: US. This item can be shipped to United States.

• Model: Acu-Rite Millpwr G2
• Brand: Acu-Rite
• Machine Type: Milling Machine

Cnc wireless handwheel mach3 usb mpg pendant for mach3 4 axis engraving us stock (us-cn307). Click an image to enlarge. The rf is standard with 2.4g ism , the tx power is 0db and the rx sensitivity is -98db. The rf has 64 channels, the channel gap is 1mhz. The transmission distance is further than 15 meters with no barrier.

The protocol designed with high performance; low power consumption;automatic learning id number. To jump frequency adaptively when noised , which can work with 2.4g wireless mic , wlan and bluetooth etc. 32 sets wireless handle work fine at the same time in one room , with no-interference each other. Has the function of the hand wheel, 100ppr the manual pulse generator output. Display, real-time display of the machine the workpiece coordinates, mechanical coordinates.

With the function of the hand wheel boot: hand wheel guide, facilitate the adjustment process. When mach3 is installed , there will be a folder created named “plugins” in the mach3 folder. This folder is the location to put and plugin files that you want mach3 to know about. Dll in the \mach3\plugins folder. Check and make sure it is there.

Setup diver for automatically set the knife height function. M1s copy the installation directory to the mach3. Dll file is in \mach3\plugins, the next step is to connect the huttlepro.

If you are certain that your shuttlepro is working and your hardware is working then you can simply plug in the shuttlepro to one of the usb ports. Once the shuttlepro is connected, start mach3 and go to the “config” menu choice and select “configplugins”. You should see the shuttlepro choice with a green checkmark in front of it.

If it is not checked, you can check it. The checkmark means that mach3 found the shuttlepro on tartup. Click the “config” in yellow and set the buttons as you wish. Once you have the proper button selected in the mach3 shuttlepro plugin config menu, your shuttle device should be working properly. 1cd for manual and mach3 software. All items must be returned in their original condition. If you are dissatisfied for any reason, please donot be quick to leave negative/neutral feedback. We work hard to make sure every customer 100% satisfied and resolve any problem for you and always leave positive feedback to all our customers. If you are satisfied with the product you received, please leave us positive feedback and 5 scores dsr.

This item can be shipped worldwide.