BRIDGEPORT CNC FULL 3 AXIS MACHINE MACH 4 SOFTWARE INSTALLED. The original machine was torn down cleaned and painted. All parts were examined and repaired/replaced as necessary. Then the mill was upgraded to mach 4 with a new computer. Machine was wired and tested then a new electrical drawing was made with original and modified wiring. We Registered Mach 4 Software this will give. We see other listings on the internet for Mach 4 upgrades that you have to do yourself. This machine is under Full power Full three axis X-Y-Z you are welcome to come see it run. Bring or send your truck or trailer we will load for free. Specifics for this machine. Table travel (X-axis) 18. Saddle travel (Y-axis) 12. Quill travel (Z-axis) 5. Knee travel (manual) 16. Erickson #30 Quick Change chuck. Speed range 60 – 4200 rpm. Power 208 vac 3 phase 20A. Wired for Mister & Flood. This Machine is listed Locally. Let us know if you have any questions. The item “BRIDGEPORT CNC FULL 3 AXIS MACHINE MACH 4 SOFTWARE INSTALLED” is in sale since Wednesday, November 21, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “bg4371″ and is located in Plainville, Connecticut. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• MPN: Does Not Apply

Sherline CNC 4 Axis Milling Machine – Mach 3 Software. Item appears to be lightly. Ign of minor s. Fully tested, excellent working condition. Dell Laptop pre-installed Mach3 software , ready to use. Rotary Stage with Sherline 3 jaw chuck. Power cable and USB cable. The item “Sherline CNC 4 Axis Milling Machine Mach 3 Software” is in sale since Wednesday, November 28, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “greatest_choice” and is located in Manassas, Virginia. This item can be shipped to United States.

Drilling Milling CNC Table size 28″x8″ 3 Axis Stepping motor Mach 3 System. Weiss Drilling/milling cnc machine is desing high precision operations. Drilling, milling, boring, reamings, etc. 3 axis high speed accurate automatic. Working molds and prototypes. High torque, high stability and high spindle speed. X/Y/Z Axis Ball Leadscrew. X/Y/Z Axis Step Motor. Table Size 28″X8″ / 700210mm. T-slot (WidthNumber) 1/2 / 12mm3. Longitudinal Travel (X) 17/425mm. Travel (Y) 8.4/210mm. Vertical Travel (Z) 8.4/210mm. Simple Protective Covers Cross. Toolkit X/Y/Z Axis Feeding Speed 106000mm/min. Optional Accessories: X/Y/Z Axis Rapid Travel Speed 6000mm/min. Spindle Speed Range 50-3000 RPM. Spindle Nose to Table Surface 9.6/240mm. Spindle Axis to Column Guideway 14.4/360mm. Spindle Taper MT#3 or R8. Main Motor 1.1kW. Feeding Motor 0.75kW. Positioning Accuracy ±0.02mm. Repeat Positioning Accuracy ±0.005mm. Overall Size (LWH) 11008501800mm. All machines are tested and certified for quality. Our machines are guaranteed for 3 years of the parts framed by us. The item “Drilling Milling CNC Table size 28×8 3 Axis Stepping motor Mach 3 System” is in sale since Saturday, September 8, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “superdiscounttools” and is located in Nanjing. This item can be shipped worldwide.

• Model: WMD30CNC
• Modified Item: No
• Country/Region of Manufacture: China
• Custom Bundle: No
• MPN: EMD30CNC
• Brand: WEISS MACHINERY
• Non-Domestic Product: No

SERVO Type 150 X/Y-Axis. MADE IN THE USA! Brand New Servo Type 150 X/Y-Axis Power Feed “Only”. Legendary Name, Legendary Quality. Continuous Torque: 100 in. / 11.3 NM. Electrical: 110V, 50/60 Hz, 2.5 Amps. Approximate weight: 15 lb. / 6.8 kg. STILL MADE IN THE USA! The picture shows Black and the new Servo Power Feeds are Black to celebrate 50 years in business for Servo Products. This is a Power Feed Only. Don’t settle for an imported copy… NEED PARTS FOR YOUR BRIDGEPORT? WE STOCK ALL BRIDGEPORT SERIES I REPLACEMENT PARTS! We are a distributor for HIGH QUALITY TOOLS, Inc. And carry their complete line of replacement parts and accessories. We also carry cutting tools, work holding, tool holders, measuring tools and much much more. New inventory being added regularly! Thank You for looking! We always try to improve our customer service to ensure that you, the customer , receive best service available! Just let us send you updated invoice. We guarantee that the items are exactly as stated in the description. The item “Servo Type 150 X/Y Axis Power Feed for Milling Mach without Mounting Kit NEW” is in sale since Monday, May 11, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “toolguys2″ and is located in Largo, Florida. This item can be shipped worldwide.

• Brand: Servo
• Country/Region of Manufacture: United States
• Model: ECF-150
• Country of Manufacture: United States
• MPN: ECF-150

Please message me if you have any questions and I will get back to you quickly. This sale is for a Hurco Hawk 5 CNC milling machine. The machine is in good mechanical condition and ready for a control retrofit. The servo motors and controls have been removed in preparation for the retrofit. We will load the machine free of charge. New high resolution photos of the machine will be added soon. You are welcome to inspect this machine in person at Absolute Machine Shop in Newburg Missouri. X & Y Travels 31″ x 13.75″. Table Size 42″ x 13″. Spindle Taper 40 ISO. Spindle Motor 5 hp. Power 230V, 60H, 3P. Machine Weight 4,500lbs. Machine Dimensions 76″ x 69″ x 96 (LxWxH). The item “Hurco Hawk 5 retrofit Cnc Mach 3 Centroid Machmotion Milling Machine Flashcut” is in sale since Thursday, August 03, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “amsindsales” and is located in Rolla, Missouri. This item can be shipped to United States.

• Brand: Unbranded/Generic
• MPN: Does Not Apply

This sale is for a 1998 Acra DMB3V CNC bed mill in good mechanical condition. This machine has been prepared for retrofit. The spindle motor with variable frequency drive are still installed. The axis motors, drives and control have been removed. This machine would be a perfect candidate for a PC retrofit like mach 3 or EMC. Travels 32″20″20. Spindle speeds 65-5000rpm AC drive. We would be happy to load onto buyers transport free of charge. The item “Acra Cnc Bed Mill Fryer Bridgeport Milling Machine Mach 3 Retrofit” is in sale since Thursday, November 17, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “amsindsales” and is located in Rolla, Missouri. This item can be shipped to United States.

This sale is for a 1998 Acra DMB3V CNC bed mill in good mechanical condition. This machine has been prepared for retrofit. The spindle motor with variable frequency drive are still installed. The axis motors, drives and control have been removed. This machine would be a perfect candidate for a PC retrofit like mach 3 or EMC. Travels 32″20″20. Spindle speeds 65-5000rpm AC drive. We would be happy to load onto buyers transport free of charge. The item “Acra Cnc Bed Mill Fryer Bridgeport Milling Machine Mach 3 Retrofit” is in sale since Saturday, October 29, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “amsindsales” and is located in Rolla, Missouri. This item can be shipped to United States.

This sale is for a 1998 Acra DMB3V CNC bed mill in good mechanical condition. This machine has been prepared for retrofit. The spindle motor with variable frequency drive are still installed. The axis motors, drives and control have been removed. This machine would be a perfect candidate for a PC retrofit like mach 3 or EMC. Travels 32″20″20. Spindle speeds 65-5000rpm AC drive. We would be happy to load onto buyers transport free of charge. The item “Acra Cnc Bed Mill Fryer Bridgeport Milling Machine Mach 3 Retrofit” is in sale since Wednesday, October 05, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “amsindsales” and is located in Rolla, Missouri. This item can be shipped to United States.

This is a full package including the mill, the controls, the computer, and some tooling. Tooling includes the vise, collets a hold down set, collet wrenches, and a vise stop. The machine has roughly 10″ x 8″y 8″ z collum and 3 ” z quill travel. The travels are limited by soft limits to slightly less for cnc operation. The conversion has Thompson Ball Screws for the X and Y and uses the quill drive for the Z axis. The machine is using a Dynamtion Kflop USB FPGA motion controller to run the machine. No old school paralle port used here. The controller can run with either Mach3 or Kmotion CNC software running on Windows 10. The computer is a Dell optiplex 745 and includes the 15Planar Touch screen mounted on the machine. The control box has 2 Gecko G202 drives and one G201 drive, a 54 volt 20 amp power supply for the motors and a CNC4PC C10 breakout board. This is the white box in the pictures. The black box contains the kflop controller. I have a home/ limit switch on each axis. All three axis are have NEMA 34 stepper motors on them. The spindle is a variable speed and runs from a Teco VFD drive. Machine and spindle run on 120 volts. I can help load. If you are local I will come to your place after you get it home and get it back operational for you. Please come and look, can be seen running under power. I will also include the parts to convert back to manual operation. The item “CNC Mill Milling Machine, with tooling 3 Axis Mach 3 Touch Screen Gecko Drives” is in sale since Saturday, April 02, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eman5oh” and is located in Cortland, New York. This item can’t be shipped, the buyer must pick up the item.

The sale was for a 1997 Hurco Hawk 5 CNC milling machine ready for retrofit. We have gone through this machine and prepared it for retrofit and have found it to be in great mechanical condition. The control system as well as the axis drive motors have been removed in preparation for the system installation. I would highly recommend the MachMotion control system with AC servomotors. Over the years we have retrofitted many Hurco knee mills to the MachMotion control and found it to be very easy to use and extremely reliable. The Hurco Hawk 5 is a very well-built and rigid precision machine with a 5 hp cat40 spindle utilizing an air actuated power drawbar. Working Surface of Table……………………………………………. Maximum Load on Table……………………………………………….. Distance Spindle Nose to Table……………………………………. 4.5″ 19.5″. Distance Spindle C/L to Column Ways……………………………………….. Axis Thrust X- & Y-Axes…………………………………………… 5 HP 220V 3/60. 105″ x 110″ x 97 H. We would be happy to load onto buyers transport free of charge. The item “Hurco Hawk 5 Km5p Retrofit Machine Milling Machmotion Mach 3 Centroid EMC CNC” is in sale since Monday, March 30, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “amsindsales” and is located in Rolla, Missouri. This item can be shipped to United States.

• Brand: Hurco
• Model: Hawk5
• MPN: D