We sell these brands:OSG, MISTUBISH, KYOCERA, Sumitomo, DIJET, Hitachi, Taegutec Yuzetools and so on. We are factory of Carbide milling cutter, alloy drill, thread milling cutter, turning tool holder. Thank you for your support!
Comments Off
We will take care of you! Cell Phones & Accessories.
Comments Off
We have had quite a few requests to make a Spindle Square for the world market that works with Metric collets and reads in native units. We have built a new spindle square just for this that offers all of the same adjustments but fits this world market demand. The spindle square is adjustable with 8mm holes for 75 – 150mm. It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 8mm stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 175mm by 19mm by 19mm with a brushed finish. 125mm by 12mm hardened and chromed shank 18-8 stainless set screw to retain. 8mm x 6mm rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Aluminum 3.5mm (6-32) thumb screws to retain indicators (anodized aluminum as to not mar indicators). 8mm bores for Metric Indicators. Adjustments at 75mm, 100mm, 125mm and 150mm. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilizing a similar model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products.
Comments Off
5410-DRO (METRIC) Includes: Oil reservoirs on the X/Y axes and the Z axis. Brass Lead screw cover for the Y-axis lead screw. Model 5410 (METRIC) DRO Vertical Milling Machine 12? Base and standard accessories. Standard equipment for the model 5410-DRO mill includes. A powerful 90V DC motor with electronic speed controller. Special handwheels are supplied with DRO machines. These handwheels can be reset to zero electronically with the push of a button on the DRO display box. Sherline DRO mills are outfitted with the special DRO 2? (51mm) handwheels on the Y-asix leadscrew and X-axis table feed screw, and a 2.5? Handwheel on the Z-axis vertical feed screw. Each handwheel has laser engraved aluminum handwheel collars. (70 mm) x 13.0? (330 mm) table with two T-slots. Pulleys, drive belt, three hexagonal keys, spindle bars, gib removal tool, eight-foot three-wire power cord, and instruction manual. 1297 Headstock spacer block. 3072 ¼ Jacobs drill chuck w/ key, #1 Morse arbor with drawbolt. Oil reservoirs on the X/Y axes and the Z axis to help keep critical parts lubricated. These were initially developed for CNC machines that run constantly for hours on end but can benefit manual machines as well. Brass leadscrew cover that keeps chips off the rear of the Y-axis leadscrew. We are the first ever Sherline’s online dealer. Made in the USA! Herline Mills variety Specifications (metric in parenthesis). Max clearance, table to spindle. 8.00 (203 mm). 9.00 (229 mm). Throat (without headstock spacer). 2.25 (50 mm). Throat (with headstock spacer block). Included, 3.50 (89 mm). 9.00 (228 mm). 3.00 (76 mm). 5.00 (127 mm). 7.00 (178 mm). 6.25 (159 mm). 5.38 (137 mm). 14.75 (375 mm). 15.00 (381 mm). 20.00 (508 mm). 11.75 (298 mm). 14.00 (356 mm). 22.25 (565 mm). 20.75 (527 mm). 23.38 (568 mm). 2.75″ x 13.00″ (70 x 330 mm). (70 x 457 mm). Movements in addition to X-, Y- and Z-axes. Headstock rotation 90° left/right. Headstock rotation 90° left/right, column rotation (90° L/R), column pivot (front/back), column swing (90° L/R) and 5.5 column travel (in/out). Headstock rotation (90° left/right) Column pivot (90° forward/back) Column swing (90° left/right) Column travel (in/out) 5.5? 90 volt DC with electronic speed control automatically converts any input from 100 VAC to 240 VAC, 50 or 60 Hz. 70-2800 RPM continuously variable by electronic speed control. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dpp-engineering” and is located in this country: US. This item can be shipped to United States.
Comments Off
We have had quite a few requests to make a Spindle Square for the world market that works with Metric collets and reads in native units. We have built a new spindle square just for this that offers all of the same adjustments but fits this world market demand. The spindle square is adjustable with 8mm holes for 75 – 150mm. It can be used to tram on multiple vise sizes, and machines such as your mill, drill press, sine bar and lathe. You can use any indicator with a 8mm stem so you can install a brand or resolution of your preference. The hardware will never rust and shouldn’t damage your indicator unless you over-torque the thumbscrew. Main body is made out of 6061 Aluminum and measures at 175mm by 19mm by 19mm with a brushed finish. 125mm by 12mm hardened and chromed shank 18-8 stainless set screw to retain. 10mm x 6mm rare earth magnet for zero’ing square attached to square so it isn’t easily misplaced. Aluminum 3.5mm (6-32) thumb screws to retain indicators (anodized aluminum as to not mar indicators). 8mm bores for Metric Indicators. Adjustments at 75mm, 100mm, 125mm and 150mm. Made on CNC equipment in OR, using USA made materials. Large easy to read white face with crisp black graduations. Outside dimensions: 10.1″ x 8.0″ x 3.2. Snap latch; Large comfortable handle. Rugged polypropylene with handsome textured finish. Keith Rucker demonstrating how to utilizing a similar model of Spindle Square to Tram in a Wells Index Mill. Randy Richard did a demonstration on tramming in a BridgePort clone using a different common reference. You are ordering directly from the folks that make the Spindle Square. Please feel free to reach out if you have suggestions, or would like something customized. We do often make custom shanks for customer’s specific machine needs. We love your feedback. It helps us make better quality products. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “zomie10hnc” and is located in this country: US. This item can be shipped to United States.
Comments Off
5410 (Metric) Includes: Oil reservoirs on the X/Y axes and the Z axis. Brass Lead screw cover for the Y-axis lead screw. The deluxe 5400-series mill is our most popular mill. It comes equipped with all of Sherline’s standard features upgraded to include a laser engraved 12? (305mm) solid aluminum base for 2? Or additional Y-axis travel, laser engraved scales on the table and base, 2-1/2? (63mm) adjustable “zero” handwheel on the Z-axis and 2? (51mm) adjustable “zero” handwheels on the X- and Y-axes, a mill headstock spacer to provide more throat distance and a 1/4? Drill chuck and drawbolt. All Sherline mills feature precision machined dovetailed slides with adjustable gibs, permanently lubricated spindle bearings, adjustable preload anti-backlash feed screws and a high-torque 90 VDC motor with electronic speed control. Speed is continuously variable from 70 to 2800 RPM without gear or belt changes. A second pulley position is also available to provide extra torque at low RPM if needed. Standard equipment for the model 5400 (5410 metric) mill includes. A powerful 90 VDC motor with electronic speed controller. (70 mm) x 13.0? (330 mm) table with two T-slots. Pulleys, drive belt, three hexagonal keys, spindle bars, gib removal tool, eight-foot three-wire power cord, and instruction manual. 1297 Headstock spacer block. 3072 ¼ Jacobs drill chuck w/ key, #1 Morse arbor with drawbolt. Available with red handwheels upon request. Oil reservoirs on the X/Y axes and the Z axis to help keep critical parts lubricated. These were initially developed for CNC machines that run constantly for hours on end but can benefit manual machines as well. Brass lead screw cover that keeps chips off the rear of the Y-axis lead screw. We are the first ever Sherline’s online dealer. Made in the USA! Sherline’s Mills variety Specifications (metric in parenthesis). Max clearance, table to spindle. 8.00 (203 mm). 9.00 (229 mm). Throat (without headstock spacer). 2.25 (50 mm). Throat (with headstock spacer block). Included, 3.50 (89 mm). 9.00 (228 mm). 3.00 (76 mm). 5.00 (127 mm). 7.00 (178 mm). 6.25 (159 mm). 5.38 (137 mm). 14.75 (375 mm). 15.00 (381 mm). 11.75 (298 mm). 14.00 (356 mm). 22.25 (565 mm). 20.75 (527 mm). 23.38 (568 mm). 2.75″ x 13.00″ (70 x 330 mm). Movements in addition to X-, Y- and Z-axes. Headstock rotation 90° left/right. Headstock rotation 90° left/right, column rotation (90° L/R), column pivot (front/back), column swing (90° L/R) and 5.5 column travel (in/out). 90 volt DC with electronic speed control automatically converts any input from 100 VAC to 240 VAC, 50 or 60 Hz. 70-2800 RPM continuously variable by electronic speed control. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dpp-engineering” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
Comments Off
Here is a Sherline Model 5410 Deluxe Milling Machine in Metric configuration. All Axes move smoothly with minimal backlash. This is the deluxe machine with manual powered handwheels. The motor functions smoothly at all rpms. The anodizing of the table shows a bit of wear, but much fading. Pretty sure this mill is not setup to enable CNC stepper mounts. Can’t find the original instruction book. Sherline has an extensive free download area for instructions to all their machines and accessories. This sale includes: The 5410 deluxe metric mini mill, Sherline cards for conversions etc, small drill chuck with mounting bolt and key, a Sherline 3/8 end mill holder with Five (5) dual flute end mills of various sizes. Also included is a 2pc (split) red anodized aluminum work holding vise to mount on the milling table. All gear and machine are in excellent working condition. Items in process of being listed here include: Sherline Rotary Table, Sherline Fly Cutter with carbide bar, Complete Boring Bar set consisting of both Sherline Boring Bar holders and all 4 sizes of Sherline boring bar bits. These items show minimal use, and all function correctly. Once the machine is in use, we cannot be responsible for any damages or mistakes leading to problems or failure of the machine. We have no control over buyers usage. While this machine will easily machine mild steels, aluminum, brass, plastics etc; it requires great experience and technique to do work on many harder substances. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “lestersurv_8″ and is located in this country: US. This item can be shipped to United States.
Comments Off
Combined Models 4410-DRO deluxe 3.5 x 17? Lathe and 2010-DRO 8-Direction vertical milling machine with a host of the most popular machining accessories. Included are all the items you need to set up for most machining jobs including cutting tools and holding fixtures. In addition to the lathe and mill, you get the following accessories. Cutoff Tool and Holder. HSS Tool Set (LH, RH, Boring). Step Block Hold-down Set. Fly Cutter w/ 1/4? Mill Collet Set w/ Drawbolt. Drill Chuck w/ #1 Morse Arbor, Key and Drawbolt. Drill Chuck w/ Arbors, Key and Drawbolt. Sherline Accessories Shop Guide. Shank End Mill Set. Max clearance (table to spindle). Throat (w/ headstock spacer). Spindle runout of Morse taper. Electronically controlled spindle speed range. 70 to 2800 RPM. (70 x 330 mm). Movements in addition to X-, Y- and Z-axes. Headstock rotation (90° left/right). 90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz. LATHE SPECIFICATIONS: Swing Over Bed. Spindle Runout of Morse Taper. 0° to 45° by 5°. Made in the USA! This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dpp-engineering” and is located in this country: US. This item can be shipped to United States.
Comments Off
Amadeal 12-piece ER32 MT3 Metric Collet Set. Brand New Great quality. ER32 collets have 16 jaws offering superb grip Collets close down by 1mm. Collet sizes – 3,4,5,6,8,10,12,14,15,16,18,20mm Includes a handy carry-case (case design can vary between wood, plastic and aluminium). For Highlands, Islands and Northern Ireland, please select the Hermes 3-5 Day option. “Good stuff” – C. Quick response to enquiry. Postal costs to customers in Italy will also be liable to a surcharge for items sent by post to cover the cost of’International Signed For’. The item “ER32 Collet Set 12-Piece MT3 Metric” is in sale since Friday, February 16, 2018. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “harryuk123″ and is located in London. This item can be shipped worldwide.
Comments Off
This mill is in excellent condition, with low hours, and minimal wear. The mill bed has some scratches and gouges from use (see pics). The variable speed spindle, and DRO’s work perfectly! Comes with everything pictured. The item “Sherline 5410-DRO METRIC Deluxe Mill. Low hours, good condition! TAIG” is in sale since Sunday, November 14, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rcoptionsconnect” and is located in San Jose, California. This item can be shipped to United States.
Comments Off
