General Info: Stock #: SB-181045 Location: Stone Mountain, GA Brand: Millport Model: 2S Serial #: 84894S Year: 1984 Approx. Check out the video on the listing to see it in operation. The ways are pretty worn down. Also, it does not like to run in low speed gear setting. We are glad to show under power. Video will open in a new window. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Purchaser shall pay The Equipment Hub a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. The item “Millport 2S 9 x 42 Vertical Milling Machine with Servo 140 Power Feed” is in sale since Wednesday, June 27, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “equipmenthub” and is located in Stone Mountain, Georgia. This item can be shipped to United States.

General Info: Stock #: CD-171205 Location: Stone Mountain, GA Brand: Millport Model: 2 Serial #: 92038 Year: 1979 Approx. Below is a video of it in operation. We are glad to show under power. Video will open in a new window. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Purchaser shall pay The Equipment Hub a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. The item “Millport 2 9 x 42 Vertical Turret Milling Machine, Bridgeport” is in sale since Wednesday, January 03, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “equipmenthub” and is located in Stone Mountain, Georgia. This item can be shipped to United States.

WE can work out the difference somehow negotiable. I bought it new 4 years ago from Centroid. I have a home shop, it has not been used much at all. It has full 5 axis control and probe digitizing. I played with it digitizing and re-producing 3D forms. We used BobCad to generate the 3D programs. That was fun and interesting. We have run a few regular jobs on it. The Rhino does a good job cutting. This is not the Knee Mill type, It is a Bed Mill type. More solid with box ways. THE HEAD IS SOLID ON BOX WAYS ALSO! It has the 4th and 5th axis servos. I wanted to put them on 2 rotary tables to build the 5 axis rotary table. We do not have the time to do that now. They sell 4th-5th tables with stepper motors pretty cheap, You get the 4th and 5th axis Centroid servos with it, so you could swap out the stepper motors with servos pretty easily and have a sweet full 5 axis. You can digitize cylinder heads and CNC mill the ports with this machine! Some tooling is available. An insured rigger must take it out. My time for playing with the Rhino is over- now it is your time. The item “MILLPORT RHINO II CENTROID M400 5 AXIS” is in sale since Monday, February 27, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “sprayrider” and is located in Brookville, Indiana. This item can’t be shipped, the buyer must pick up the item.

MILLPORT Model 2S Step Pulley Head Manual Vertical Mill, S/N 790487, New 1979. Table Size – 9″ x 42″. Longitudinal Table Travel – 30. Saddle Cross Travel – 12. Quill Travel – 5. Knee Vertical Travel – 16. Ram Travel – 12. Spindle Taper – R8 Spindle Motor – 2 HP Spindle Speeds (16 with Step Pulleys) – 80 to 5440 RPM Weight, Approx – 2000 Lbs. Note – Mill vise shown in pictures is NOT included. 2-Axis Newall Sapphire Digital Readout Ralmike Power Table Feed (missing bottom cover). 1-Shot Lube Operating Manual Offered as is, Machine is operational but is missing the quill feed engage mechanism (see pictures). Offered locall y an d subject to prior sale. Loading is availab le. Cre dit card users need to cal l us with the card information. Sale subject to Advanced Machinery Companies Terms & Conditions. The item “MILLPORT Model 2S Vertical Mill Milling Machine, with DRO, Powerfeed, 9 x 42, R8″ is in sale since Wednesday, December 07, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “amcsales” and is located in Dayton, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Brand: Pilgrim
• MPN: Does Not Apply
• Model: SMT-200VS

10 x 50 Millport CNC Vertical Knee Mill. Gahr Machine Inventory #: 2511 Serial Number #: 6325 Model #: 3KHUT Details: – Age: 1986 – 10 x 50 table – Vertical head swivels – Variable speed 60 to 4250 RPM – R8 spindle taper – Anilam Crusader II CNC Control – 2 axis control X axis travel 31.5, Y axis travel 14 – Bijur lube system – Spraymist coolant system – Misc. Tooling, 2 collet racks, 6 swivel vise – Approx. Machine weight: 3100 lbs Elect. We will shoot and upload a video to YouTube for your viewing pleasure. All items are F. Our Warehouse or Factory Distributor. Special order merchandise, or merchandise held by customer for over 30 days, will not be accepted for return. All claims must be made within 5 days of receipt. We test each machine and machine tool to ensure you receive a quality product. Closed Saturday and Sunday. The item “MILLPORT 10 x 50 CNC Vertical Knee Mill” is in sale since Tuesday, June 16, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “smalltoolsinc_cleveland” and is located in Euclid, Ohio. This item can be shipped to United States.

• Brand: Millport
• Model: 3KHUT

Millport 3HP variable speed vertical milling machine. The machine was serviced 3 years ago and has seen only light usage since, it has a brand new newall 2 axis DRO. The item “Millport Vertical Milling Machine” is in sale since Wednesday, November 11, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “dol_am1″ and is located in Peebles, Ohio. This item can’t be shipped, the buyer must pick up the item.