Power Drawbars to fit Southwestern Industries Prototrak Bed Mills. Overall length 25.150″ 5/8 -11″ thread. Fits older model DPM, TRM, and B3 bed mills.
Comments Off
Power Drawbars to fit Southwestern Industries K2, K3 Knee mills with R-8 spindles.
Comments Off
Make: Clausing/Kondia CNC Vertical Mill. 72″ x 72″ x 82.
Comments Off
Southwestern Proto Trak Model DPM 3 Axis CNC Vertical Bed Mill A. Table Size: 10″ x 50″. X Axis Travel: 31. Y Axis Travel: 17. Z Axis Travel: 23 1/2. Spindle Speeds (Variable): 60- 4,200 RPM. Spindle Nose: #40 Taper. Spindle Quill Travel: 5. Spindle Quill Feeds (3): 0.0015″ – 0.003″ – 0.006. Rapid Traverse (X & Y Axis): 100 IPM. Rapid Traverse (Z Axis): 150 IPM. Weight Of Workpiece: 1,320 Lbs. Dimensions (L x W x H): 71″ x 66″ x 85. Weight: 4,100 Lbs. Machine runs great and has a new monitor.
Comments Off
BRIDGEPORT VERTICAL MILL WITH 3 AXIS PROTOTRAK CONTROLS.
Comments Off
This is an SWI Trak Model K3 Vertical Knee & Ram Type Milling Machine That Was Upgraded on July 15th of 2020 With A New SWI ProtoTrak Edge CNC Controller. Specifications are as follows. Max Weight of Workpiece. X-Axis (Longitudinal Table Travel). Y-Axis (Cross Saddle Travel). Z-Axis (Vertical Knee Travel). “Z” Axis Read Out of Quill Travel On ProtoTrak Screen. Pneumatic Powered Draw Bar. One Shot Lubrication System. (7) Assorted R-8 Collets. We believe the new owner of this “ABSOLUTELY EXCELLENT” SWI Trak K3 Vertical Milling Machine with a New in 2020 ProtoTrak Edge CNC Control will be very happy with it. We will load, free of charge on any truck or trailer. First of all, our descriptions are as accurate as we can possibly make them, and we’ve been describing equipment for longer than we care to admit. Every item we sell, unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse 515 Kercher St. Best Ways Brokerage Inc. The Trak K3 Milling Machine will weigh approx. 3,000# and occupy 6′ of bed space. Further, inform them that it needs to be on air ride and tarped. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “u$ave2″ and is located in this country: US. This item can be shipped to United States.
Comments Off
Prototrak VMC2 Vertical Machining Center low hours. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “meci1995″ and is located in this country: US. This item can be shipped to United States.
Comments Off
CLAUSING KONDIA 3-AXIS CNC VERTICAL MILLING MACHINE WITH 9″ x 48″ PROTOTRAK MX-3 CONTROL KURT POWER DRAWBAR. 9″ x 48″ Clausing Kondia 3 Axis CNC Vertical Mill, With Proto Trak MX 3 Control, S/N Y68. Table Size 9″ x 48 “. Spindle Speeds 60-4000 RPM. Spindle HP 3 HP 220 Volt 3 Phase. Machine Weight 2500 LBS. Proto Trak MX 3 Control. Kurt Power Draw bar. Excellent Condition – Original Paint. INSPECT UNDER POWER IN LEBANON, NJ. We can help finding competitive trucking to your location. Here’s the link to upload to. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “muke2000″ and is located in this country: US. This item can be shipped to United States.
Comments Off
General Info: Stock #: CL-210126 Location: Stone Mountain, GA Brand: SWI Model: Trak K3 Approx. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. STORAGE: The Equipment Hub will provide up to 30 days of free storage, unless otherwise specified on the accompanying “quote/invoice” form. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “equipmenthub” and is located in this country: US. This item can be shipped to United States.
Comments Off
Bridgeport ProtoTrak EDGE Two Axis CNC / Manual Vertical Mill 2HP 48 Table Southwestern Industries Control. 2012 Model Control Very user friendly. Can also use control as DRO position for manual operation. Machine is in great shape. 1 Shot Lube system serviced. Head disassembled cleaned and inspected. New plastic keys and bushings. (88) Bridgeport CNC Prototrak Edge 2 Axis Control Learn Run – YouTube. All products are as is. I shall have no other obligation or liability, direct or indirect, of any kind, including liability for special, incidental, or consequential damages. This item is for sale locally and may end at any time. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “stantecss” and is located in this country: US. This item can be shipped to United States.
Comments Off
