Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However, Should This Not Be Possible Or Practical Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives!! This Has Been , Inspected And Tested For It’s Function Only… We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It’s Installation , Operation & Safe Guarding. Any And/Or All Issues Or Concerns With Regards Safety Are The Buyers Sole Responsibility And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above. Machine Details & Specifications. Brown & Sharpe Light No 2 Universal Milling Machine W/Loads & Loads Of Mostly New Tooling Including Dividing Head W/ Tail Stock And More! What You See Is What You Get!! Safety Requirements & Standards. Brenda & Cliff Davis. Bdavis AT davismachinery DOT c o m. The item “Brown & Sharpe Light No 2 Universal Milling Machine WithLoads Tooling. Rare Find” is in sale since Sunday, October 18, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “davismachinery” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Model Year: Antique
• Type: Horizontal Milling Machine
• Make: Van Norman

Fully functional all original Atlas Horizontal Mill upon an Atlas stand, exceptional quality. I’ve owned this mill as a hobbyist machine for the last 10 years. Very light usage, kept inside house workshop throughout time no rust, nothing broken. All original paint on mill and stand. Power feed table with original’kickout’ clamp plus two custom table stop clamps for manual operation. The mill is powered by an AO Smith 1/2 HP motor. Craftsman mill table swivel vise included. Also includes both the 7/8″ and the 1″ diameter cutter arbors with spacer collars and the Atlas draw-in bar. Table Dimensions: 18″ wide, 4″ deep (18″ x 4″). Table Travel: 8″ x-travel, 3″ y-travel. Accessories: Atlas Arbor driver, Atlas Shell End Mill driver, original arbor outboard support bar, Jacobs head stock drill chuck. Both 1/2″ and 3/8″ MT-2 end mill adapters. Few cutters, new belt and literature. The item “Vintage Machinist Atlas Horizontal Milling Machine Rare + Tooling” is in sale since Friday, September 18, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jeff6651″ and is located in Gainesville, Virginia. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas
• Machine Type: Horizontal Milling Machine
• Bundle Description: Milling machine plus some tooling.
• Function: Milling
• Voltage: 120 V
• Table Length: 15 in – 19.9 in
• Country/Region of Manufacture: United States
• Table Width: Less than 10 in
• Power Source: Electric

Atlas MF horizontal milling machine. Condition is used restored. This mill looks great runs smooth and quiet very clean. 3/4 hp motor 115/230 volt wired for 115v 1725rpm.. Some tooling included 2 vices, drawbar, (original) support arm.. The one on machine was added for length, extra milling arbor, one on machine works fine. The other one is original but the nut is missing on end of arbor.. Few cutters that may or may not fit the arbors. Small lathe chuck 2 dia. 2 whalstorm chucks 3/8 Capacity one works one doesn’t Could be fixed. I have the side belt gaurd but cant figure out how it’s supposed to mount. The bump stop studs are missing that mount on front of the table that bumps the switch to disengage the powerfeed.. But can easily be engaged/disengage manually They could be made. I also have owners/operating manuals. Great machine ready to work. The item “Atlas (MF) horizontal milling machine rare, + tooling machinist tools” is in sale since Saturday, July 4, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dmmb5984-1″ and is located in Louisville, Kentucky. This item can be shipped to United States.

• Brand: Atlas
• Custom Bundle: Yes
• Model: MF
• Machine Type: Horizontal Milling Machine
• Function: Milling
• Bundle Description: Milling machine plus some tooling.
• Voltage: 115 V
• Country/Region of Manufacture: United States
• Spindle Taper: Mt2
• Spindle Horsepower: 3/4hp
• Power Source: Electric
• Control: Manual

Deckel FP4 Universal Milling Machine. In absolute excellent condition both working & cosmetically. Super rare 1970s Deckel FP4 Universal Milling Machine with Original Paint! One of the most sought after, well-built machines ever made. Especially in this condition. Just an absolute beautifully engineered piece of equipment. The spindles on this machine sound great and all the speeds & feeds have been tested and are working condition. Ways looks amazing and comes equipped with the factory tilting rotary table, Acu-Rite 3-Axis Digital Readout System, Horizontal Arbor Support, Various toolholders & more. (Lots of pictures below). Everything on this machine is in 100% working condition and comes loaded with features. This is a rare find.. Don’t let it pass you by! Backed by our 30-day return privilege. Check out the short video below of the machine under power. DECKEL FP4 UNIVERSAL MILLING MACHINE DEMO. Deckel FP4 Horizontal/Vertical Milling Machine. Vertical Machine Table Size 39.25″ x 15.5″. Vertical Quill Stroke vertical 3.5. Vertical Spindle Head manual adjust on headstock 8.5. Spindle Speeds (18) 31-1600 rpm. Feed Rates X/Y/Z (18) 3/8 – 20 ipm. Slide Travel per revolution of handwheel. Permissable Table Load approx. Acu-Rite 3-Axes Digital Readout System. Universal Tilting Rotary Table 34″ x 20″. Rapid & Feeds in all axes. Front Push Button Spindle Control. Various Toolholders & Arbors. Manuals 220V, 3PH, 60Hz Input Power. The above information is to the best of our knowledge from sources deemed reliable, but should be verified at the time of inspection to confirm accuracy. We will help load small items at no charge. Hours: M-F 7:30AM – 4:30PM Saturday by appointment only. By Purchasing equipment from Rohner Machinery Sales, Inc. All Prices are in U. All proposals and acceptances of orders are made with the mutual understanding that orders are not subject to cancellation, and that a deposit is REQUIRED within 7 calendar days or this invoice is invalid. If a hold is desired, a 10% deposit is required to hold machines for up to 30-days. Deposit is non-refundable 14-days after receivable. In no event shall RMS be responsible or liable for special or consequential damages. MACHINE USE & SAFETY. S forms which are different or in addition to the terms herein. S accepting or retaining possession of the goods described on this invoice. The free listing tool. The item “DECKEL FP4 Universal Horizontal / Vertical Precision Milling Machine. Rare Find” is in sale since Thursday, January 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rohnermachinery” and is located in Fullerton, California. This item can be shipped to United States.

• Phase: 3
• Model: FP4
• Machine Type: Milling Machine
• Model Year: 1974
• Power Source: Electric
• Function: Milling
• Brand: DECKEL
• Voltage: 220 V

Plus 12″ Height Extender (Increases Work area to 26″ High) in Great Condition and Running Perfectly! Everyone probably wonders why the other end of the head on a Bridgeport has the flat area with the hole in it… Well this is why. It’s for an option Bridgeport offers but very few milling machines have… This one actually does! So for instance, you drill a hole then you swing the head around and use the Shaping head to make the hole square by broaching. Many other uses as well! Don’t miss this opportunity to get a perfect running Milling and Broaching Bridgeport! Quill Feed Handle & Knee Handle Included. Variable Speed Control, Shaping Attachment (Broaching). 9″ X 42″ MAXIMUM WEIGHT OF WORKPIECE……. 750 LBS CROSS TRAVEL…………………. 12 MINIMUM / MAXIMUM THROAT DISTANCE. 6-3/4″ / 18-3/4″ SPINDLE TAPER………………… 0.0015″, 0.003″, 0.006. We Will Finance Too… This mill is in Great Condition and Very Quiet Running. Can be inspected under power at our Central Falls, RI warehouse. All information deemed accurate but may vary from model to model. For any questions you may have.. Online leasing applications get. Please Note: Not all machines may qualify for Leasing. We accept all Major Credit Cards, Bank Wires, Company and Personal Checks. We always get better rates. CONDITIONS: All quotations are for immediate acceptance. They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing. Unless otherwise specified, prices quoted are F. Care is taken to give reliable specifications, but these are not guaranteed. We reserve the right to correct typographical errors. INDEMNIFICATION: Used Machines may not incorporate approved activating mechanisms, operator safety devices or safety guards as required by OSHA or otherwise. It is the user’s responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. The item “Bridgeport Milling Machine 42 inch Mill Miller 2HP with Rare Shaping Attachment” is in sale since Sunday, February 3, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “palmtreespecialties” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• MPN: 2HP
• Brand: Bridgeport
• Model: Milling Machine w/ Shaping Att.

1985 Aciera F1 Precision Universal Milling Machine. In absolute excellent condition both working & cosmetically. One of the rarest and cleanest “barn find” Acieras we’ve ever come across. Original paint and comes loaded with attachments. Absolutely beautiful precision, hard to find Swiss made gem. You will not find another one like this! The spindle is quiet throughout the speed ranges, ways are beautiful & very minimal backlash on the screws. Full description with complete tooling list below. Everything on this machine is in 100% working condition and comes loaded with features. This machine was well taken care of. Backed by our 30-day return privilege. Check out the short video below of the machine under power. ACIERA F1 Precision Universal Milling Machine Demo. Aciera F1 Universal Precision Milling Machine. Longitudinal travel of the table 3.94. Vertical Travel of the Table 5.90. Transverse movement of the headstock 2.95. Graduated feedscrew drums, 1-div. Movement of quill in its housing 1.97. Pitch of feedscrews (mm or tpi) 2mm (10 tpi). Headstock movement , 1-turn of crankhandle. Long movement, 1-turn of crankhandle. Vert movement, 1-turn of crankhandle. Cutter spindle clamping collet, shank dia. Plain Table – horizontal spindle axis. 39″ (Min) to 6.3″ (Max). Plain table – Vertical Spindle Nose distance 0-6.89 max. Plain Table Clamping Area 8.66″ x 3.94″. Collet clamping range, bore dia 1/16″ to 3/8″. Vertical & Horizontal Capability. Welded Steel Cabinet Base with Storage. Standard Vertical Support Spindle. 4.72 Rotary Table Attachment. Rotating 2.16 Vise Attachment. Simple Dividing Head (No indexing arbor). Spindle Dividing Head Center Support. 5C Collet Indexing Head (Non-Aciera). 5C Collet Clamping Fixture (Non-Aciera). Various Table clamping Tools. The milling head is a single unit, including the motor, gear box and cutter spindle. It can be mounted horizontally, or vertically by means of one of the vertical supports; these supports can swivel to left or right and one of them also tilts forwards and backwards. The machine is therefore universal in the true sense of the word. The cutter spindle, with provision for W 12 collets and spindle inserts, is hardened and ground and runs free from play in high precision pre-loaded bearings. The feedscrews are of special steel and have a ground thread. The 3 slides have ground and scraped prismatic-section slideways and any play is taken up by tapered gib-strips. These are some of the features which permit the “toolmaker’s accuracy” of +/. The work-holding accessories, such as the plain table and, by the intermediary of the swivel support, the universal table, the rotary table, the vices and the dividing heads, are mounted on a dove-tail section on the horizontal slide, which permits their displacement along it, and also effectively doubles the horizontal traverse. Fine Feed by Feedscrew or Rapid Feed by Lever. The slides may be traversed either by feedscrews or levers, dependent on the application of the machine. The changeover from one method to the other is effected by clamping or unclamping the feedscrew nuts. The graduated drums read to 0.01 mm. Vertical Compensation by Spring. The vertical slide is equipped with an adjustable compensating spring, which guarantees lightness of vertical traverse irrespective of the load on the table. The above information is to the best of our knowledge from sources deemed reliable, but should be verified at the time of inspection to confirm accuracy. We will help load small items at no charge. Hours: M-F 7:30AM – 4:30PM Saturday by appointment only. By Purchasing equipment from Rohner Machinery Sales, Inc. All Prices are in U. All proposals and acceptances of orders are made with the mutual understanding that orders are not subject to cancellation, and that a deposit is REQUIRED within 7 calendar days or this invoice is invalid. If a hold is desired, a 10% deposit is required to hold machines for up to 30-days. Deposit is non-refundable 14-days after receivable. In no event shall RMS be responsible or liable for special or consequential damages. MACHINE USE & SAFETY. S forms which are different or in addition to the terms herein. S accepting or retaining possession of the goods described on this invoice. The free listing tool. The item “ACIERA F1 Swiss Precision Universal Milling Machine. Loaded. Rare Barn Find” is in sale since Monday, December 16, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rohnermachinery” and is located in Fullerton, California. This item can be shipped to United States.

• Model: F1
• Country/Region of Manufacture: Switzerland
• Machine Type: Milling Machine
• Model Year: 1985
• Power Source: Electric
• Brand: Aciera
• Control: Manual
• Voltage: 220 V

EMCO QUALITY IS UNEQUALLED. MARKS ARE MAINLY OIL STAINS. COLLECTION AND TEST RECOMMENDED. WILL POST UK VERY HEAVY AND COSTLY. The item “EMCO 3 MILLING MACHINE. GREAT RARE CONDITION. AS SEEN” is in sale since Friday, December 20, 2019. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “coliwarne8″ and is located in BRISTOL. This item can be shipped to European Union member countries, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Qatar, Trinidad and tobago, Uruguay.

• Modified Item: No
• Country/Region of Manufacture: Austria
• Machine Type: MILLING MACHINE
• Power Source: Electric
• MPN: EMCO
• Brand: Emco
• Control: Manual

Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However, Should This Not Be Possible Or Practical Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives!! This Has Been , Inspected And Tested For It’s Function Only… We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It’s Installation , Operation & Safe Guarding. Any And/Or All Issues Or Concerns With Regards Safety Are The Buyers Sole Responsibility And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above. Machine Details & Specifications. (1) Pre-Owned/Used Van Norman Horizontal Milling Machine. Standard working surface 3-1/4″ x 13″ with 4-1/2+/-longitudinal travel. Cross travel 1-1/2″+/-”. Vertical travel 4 +/. Hand lever feeds to head, saddle and table motion. Motor: 2 HP, 3 phase, heavy-duty. Safety Requirements & Standards. Brenda & Cliff Davis. Bdavis AT davismachinery DOT c o m. The item “Van Norman Horizontal Milling Machine With Heavy Duty Base & Drive, Rare Find” is in sale since Wednesday, April 17, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “davismachinery” and is located in Providence, Rhode Island. This item can be shipped to United States.

• Model: Horizontal Bench Miller
• Country/Region of Manufacture: United States
• Model Year: Antique
• Type: Horizontal Milling Machine
• Make: Van Norman

1985 Aciera F1 Precision Universal Milling Machine. In absolute excellent condition both working & cosmetically. One of the rarest and cleanest “barn find” Acieras we’ve ever come across. Original paint and comes loaded with attachments. Absolutely beautiful precision, hard to find Swiss made gem. You will not find another one like this! The spindle is quiet throughout the speed ranges, ways are beautiful & very minimal backlash on the screws. Full description with complete tooling list below. Everything on this machine is in 100% working condition and comes loaded with features. This machine was well taken care of. Backed by our 30-day return privilege. Check out the short video below of the machine under power. ACIERA F1 Precision Universal Milling Machine Demo. Aciera F1 Universal Precision Milling Machine. Longitudinal travel of the table 3.94. Vertical Travel of the Table 5.90. Transverse movement of the headstock 2.95. Graduated feedscrew drums, 1-div. Movement of quill in its housing 1.97. Pitch of feedscrews (mm or tpi) 2mm (10 tpi). Headstock movement , 1-turn of crankhandle. Long movement, 1-turn of crankhandle. Vert movement, 1-turn of crankhandle. Cutter spindle clamping collet, shank dia. Plain Table – horizontal spindle axis. 39″ (Min) to 6.3″ (Max). Plain table – Vertical Spindle Nose distance 0-6.89 max. Plain Table Clamping Area 8.66″ x 3.94″. Collet clamping range, bore dia 1/16″ to 3/8″. Vertical & Horizontal Capability. Welded Steel Cabinet Base with Storage. Standard Vertical Support Spindle. 4.72 Rotary Table Attachment. Rotating 2.16 Vise Attachment. Simple Dividing Head (No indexing arbor). Spindle Dividing Head Center Support. 5C Collet Indexing Head (Non-Aciera). 5C Collet Clamping Fixture (Non-Aciera). Various Table clamping Tools. The milling head is a single unit, including the motor, gear box and cutter spindle. It can be mounted horizontally, or vertically by means of one of the vertical supports; these supports can swivel to left or right and one of them also tilts forwards and backwards. The machine is therefore universal in the true sense of the word. The cutter spindle, with provision for W 12 collets and spindle inserts, is hardened and ground and runs free from play in high precision pre-loaded bearings. The feedscrews are of special steel and have a ground thread. The 3 slides have ground and scraped prismatic-section slideways and any play is taken up by tapered gib-strips. These are some of the features which permit the “toolmaker’s accuracy” of +/. The work-holding accessories, such as the plain table and, by the intermediary of the swivel support, the universal table, the rotary table, the vices and the dividing heads, are mounted on a dove-tail section on the horizontal slide, which permits their displacement along it, and also effectively doubles the horizontal traverse. Fine Feed by Feedscrew or Rapid Feed by Lever. The slides may be traversed either by feedscrews or levers, dependent on the application of the machine. The changeover from one method to the other is effected by clamping or unclamping the feedscrew nuts. The graduated drums read to 0.01 mm. Vertical Compensation by Spring. The vertical slide is equipped with an adjustable compensating spring, which guarantees lightness of vertical traverse irrespective of the load on the table. The above information is to the best of our knowledge from sources deemed reliable, but should be verified at the time of inspection to confirm accuracy. We will help load small items at no charge. Hours: M-F 7:30AM – 4:30PM Saturday by appointment only. By Purchasing equipment from Rohner Machinery Sales, Inc. All Prices are in U. All proposals and acceptances of orders are made with the mutual understanding that orders are not subject to cancellation, and that a deposit is REQUIRED within 7 calendar days or this invoice is invalid. If a hold is desired, a 10% deposit is required to hold machines for up to 30-days. Deposit is non-refundable 14-days after receivable. In no event shall RMS be responsible or liable for special or consequential damages. MACHINE USE & SAFETY. S forms which are different or in addition to the terms herein. S accepting or retaining possession of the goods described on this invoice. The free listing tool. The item “ACIERA F1 Swiss Precision Universal Milling Machine. Loaded. Rare Barn Find” is in sale since Tuesday, December 3, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rohnermachinery” and is located in Fullerton, California. This item can be shipped to United States.

• Model: F1
• Country/Region of Manufacture: Switzerland
• Machine Type: Milling Machine
• Model Year: 1985
• Power Source: Electric
• Brand: Aciera
• Control: Manual
• Voltage: 220 V

BRAND NEW OLD STOCK. NEVER BEEN USED- STILL HAS PACKING GREASE AND PAPER. COMES COMPLETE WITH ADAPTOR FOR FITTING TO CURRENT AND MOST POPULAR BRIDGEPORT MILLS. A TRULY RARE PIECE OF ENGINEERING ESPCIALLY IN THIS CONDITION. COMES COMPLETE WITH EVERTHING INCLUDING HANDLES, LOCKING BOLTS, DRAWBAR ETC. YOU WON’T FIND ANY OTHERS LIKE THIS ANYWHERE! The item “BRIDGEPORT MILLING MACHINE M HEAD BRAND NEW VERY RARE” is in sale since Thursday, August 29, 2019. This item is in the category “Business, Office & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “sorted-uk” and is located in Bristol. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Bahamas, Colombia, Jamaica, Kuwait, Panama, Qatar, Uruguay.

• Function: Milling
• Brand: Bridgeport