Hurco BMC-30HT CNC Verticle Milling Machine Center, BMC30HT/M. This item is not eligible for a re. Orders with destinations outside of the continental US may incur additional charges. And 3:00 p. Additionally, any item we have listed can be picked up with prior arrangement. Thank you for visiting. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “maverickindustrialsales” and is located in this country: US. This item can be shipped to United States.

• Model: BMC30HT/M
• Machine Type: Milling Machine
• Brand: Hurco
• Control: CNC

I will load onto trailor or into a truck at no charge for service. The item “Verticle milling machine Bridgeport” is in sale since Wednesday, January 20, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “vermcde_20″ and is located in Farmingdale, New York. This item can be shipped to United States.

• Machine Type: Milling Machine
• Power Source: 220 3 phase
• Function: Milling
• Brand: Bridgeport
• Control: Manual
• Voltage: 230

I will load onto trailor or into a truck at no charge for service. The item “Verticle milling machine Bridgeport” is in sale since Friday, October 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “vermcde_20″ and is located in Farmingdale, New York. This item can be shipped to United States.

• Machine Type: Milling Machine
• Power Source: 220 3 phase
• Function: Milling
• Brand: Bridgeport
• Control: Manual
• Voltage: 230

Used Bridgeport Series I, 2HP Vertical Milling Machine for sale. Taken right from tool room floor and is in working condition. Power feed attached to table but needs repair, manual use works perfectly. Power feed replacements online, we did not need power feed so therefore we did not feel the need to repair. Spindle Nose to Table. Centerline of Spindle to Face of Column. 90° Left to Right. 45° Front to Back. 0.0015″, 0.003″, 0.006. Approximate Overall Dimensions (L-R x F-B x H). 58″x 57″x82. The item “Bridgeport Series I, 2HP Verticle Milling Machine” is in sale since Friday, April 5, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “lc1023″ and is located in Avenel, New Jersey. This item can be shipped to United States.

• Model: 2 HP J Head
• MPN: Does Not Apply
• Brand: Bridgeport

A very sturdy little milling machine for the gararge of workshop. Runs on 110v AC. All cast iron construction. Weighs apox 1000 lbs. Select speeds by changing belts. X Travel = 18″, Y travel = 7 1/2″, Z travel = 17″, Quill travel = 3 1/2″. Made in the 1970s, as a Rockwell or Clausing Clone. Does not come with Vise, Collets, or Drill Chuck. The item “Mini MaxMill, Verticle Milling Machine, Knee Mill” is in sale since Friday, April 20, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “monty_315r” and is located in Long Beach, California. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: Unknown

THIS MILLING MACHINE IS A HORIZONTAL MILLING MACHINE WITH A MARVIN VERTICLE HEAD ATTACHMENT. MACHINE IS ALL MANUAL X-Y-Z AXIS. THE TABLE CAN FEED HORIZONTAL BY USING THE HORIZONTAL CRANK DIAL HANDLE. THE TABLE CAN CONVERT TO A RACK AND PINYON LEVER ACTION PRODUCTION FEED TABLE BY REMOVING THE HORIZONTAL FEED SCREW. MACHINE IS IN GOOD RUNNING CONDITION. The item “ATLAS MILLING MACHINE WITH MARVIN VERTICLE HEAD RACK&PINYON ADVANCE” is in sale since Thursday, December 28, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “wash2034″ and is located in Neptune, New Jersey. This item can’t be shipped, the buyer must pick up the item.

Machine is in great condition, low hours and under power for inspection if needed. No tooling or vices pictured are included. Cashiers check, bank transfer, machine will not be loaded until funds have been verified. Here’s a link to machine running. LENGTH (WORK SURFACE): 28.75. MAXIMUM WEIGHT ON TABLE: 500 LBS. NUMBER OF T-SLOTS: 3. CENTER DISTANCE: 4.92. TAPER SIZE: # 40 TAPER. SPEED: 0 6,000 RPM. SPINDLE NOSE TO TABLE TOP: 4 14. TOOL DIAMETER: 3.5. TOOL WEIGHT: 12 LBS. DOOR OPENING WIDTH: 24. MACHINE WEIGHT 3,400 LBS. AIR REQUIRED: 4 SCFM, 100 PSI. FOOTPRINT: 78 X 80 X 98 H. ELECTRICS: 208 VOLTS, 3 PH, 60 CYC. The item “Haas Mini Mill, VMC Verticle Maching Center, Low Hours, USB” is in sale since Monday, November 27, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “foxholsters” and is located in Sterling Heights, Michigan. This item can be shipped to United States.

• Brand: Haas
• Model: Mini Mill

THIS MILLING MACHINE IS A HORIZONTAL MILLING MACHINE WITH A MARVIN VERTICLE HEAD ATTACHMENT. MACHINE IS ALL MANUAL X-Y-Z AXIS. THE TABLE CAN FEED HORIZONTAL BY USING THE HORIZONTAL CRANK DIAL HANDLE. THE TABLE CAN CONVERT TO A RACK AND PINYON LEVER ACTION PRODUCTION FEED TABLE BY REMOVING THE HORIZONTAL FEED SCREW. MACHINE IS IN GOOD RUNNING CONDITION. The item “ATLAS MILLING MACHINE WITH MARVIN VERTICLE HEAD RACK&PINYON ADVANCE” is in sale since Wednesday, November 15, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “wash2034″ and is located in Neptune, New Jersey. This item can’t be shipped, the buyer must pick up the item.

THIS MILLING MACHINE IS A HORIZONTAL MILLING MACHINE WITH A MARVIN VERTICLE HEAD ATTACHMENT. MACHINE IS ALL MANUAL X-Y-Z AXIS. THE TABLE CAN FEED HORIZONTAL BY USING THE HORIZONTAL CRANK DIAL HANDLE. THE TABLE CAN CONVERT TO A RACK AND PINYON LEVER ACTION PRODUCTION FEED TABLE BY REMOVING THE HORIZONTAL FEED SCREW. MACHINE IS IN GOOD RUNNING CONDITION. The item “ATLAS MILLING MACHINE WITH MARVIN VERTICLE HEAD” is in sale since Wednesday, November 01, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “wash2034″ and is located in Neptune, New Jersey. This item can’t be shipped, the buyer must pick up the item.

Machine is in great condition, low hours and under power for inspection if needed. No tooling or vices pictured are included. Cashiers check, bank transfer, machine will not be loaded until funds have been verified. LENGTH (WORK SURFACE): 28.75. MAXIMUM WEIGHT ON TABLE: 500 LBS. NUMBER OF T-SLOTS: 3. CENTER DISTANCE: 4.92. TAPER SIZE: # 40 TAPER. SPEED: 0 6,000 RPM. SPINDLE NOSE TO TABLE TOP: 4 14. TOOL DIAMETER: 3.5. TOOL WEIGHT: 12 LBS. DOOR OPENING WIDTH: 24. MACHINE WEIGHT 3,400 LBS. AIR REQUIRED: 4 SCFM, 100 PSI. FOOTPRINT: 78 X 80 X 98 H. ELECTRICS: 208 VOLTS, 3 PH, 60 CYC. The item “Haas Mini Mill, VMC Verticle Maching Center, Low Hours, USB” is in sale since Friday, October 06, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “foxholsters” and is located in Sterling Heights, Michigan. This item can be shipped to United States.

• Brand: Haas
• Model: Mini Mill