CNC Controller System G Code Motion Controller w/ MPG For CNC Milling Machines. It is an upgrading version of TC55. It can control 1, 2, 3 or 4 feeding axis, 1 analog spindle. It is equipped with 16 input port and 8 output port, supporting importing G code files from USB disk and boot picture. Support saving the current coordinates after power off. Minimum data unit 0.001 mm. Maximum data size ± 99999.999mm. Maximum Speed: 24m/min (pulse is 0.001mm). Maximum pulse output frequency 400KHz. Axis: 1, 2, 3 or 4 (X, Y, Z, C). X, Y, Z axis can conduct linear interpolation, X, Y can do circular interpolation. Electric Gear: numerator :1-99999 denominator: 1-99999. USB: Importing program and boot picture. Isolated I/O port. Maximum Program Line: 1000. Maximum Program: 99. External Manual Operation: motor clockwise and counter-clockwise spinning, start, pause, alert and stop. G code and M code. One panel MPG. 3.5-inch color LCD, pixel 320240. Analog Spindle Output: one 0-10v analog spindle. Support both servo and stepper motor. Support metric system, round, division, degree, inch, etc. Support USB connecting computer as power supply. 1 x CNC Motion Controller. 1 x Set of Screws & Nuts. We will solve the problem for you. Please do not leave negative or neutral feedback without contacting us first.

I have two new/uninstalled CNC controller I bought to use in my machine shop to retrofit old CNC knee mills. I had already retrofitted to other CNC knee mills successfully but I kept losing servo motors NOT due to the CNC. The mills were just too old. I have those controllers listed separately. THESE CONTROLLERS ARE NOT FOR FIRST-TIME INSTALLERS!!!! ALSO: THE CONTROLLERS ARE OPEN-LOOP CONTROL. THE ENCODER FEADBACK MERELY ALERTS YOU TO AN AXIS MOVEMENT FAULT. You can download the manuals from the SZGH website. All cable you will need are included and professionally labeled. The picture showing the controllers as installed in an enclosure is just for reference.