X-Axis Power Feed 450 Lbs Torque For Bridgeport Type Milling Machines. Name: X-Axis Power Milling Machine, 450 LB Torque, Power Feed Table Mill, 110V, 0-200PRM Adjustable Rotate Speed for Bridgeport and Similar Knee Type Milling Machines. Size: 7inch x 4.5inch x 11.5inch. Power Parameters: 90 Watts. Input Voltage: 110V 50/60hz, Single Phase. Rotation Speed: 0-200 RPM. Maximum Feed Speed: 650mm/Min. Maximum Return Speed: 850mm/Min. Application: for Bridgeport and Similar Knee Type Milling Machines. X-Axis power feed is made of aluminum; Power Parameter: 95Watt, 110V input voltage, 50/60Hz, single phase;Rotate Speed:0-200 RPM. Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min. Automatic And Manual Control. You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work. And this multifunctional milling machine power feed can work with excellent speed control in the entire range according to your needs. Stable And Efficient. This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio, low transmission noise, high transmission efficiency and high bearing capacity. And when fast transmission, if the tool collides with the work piece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage. Portable And Easy To Install. This power feed for milling machine is compact and portable. Weight: 5kg/11lbs, Size: 74.511.5 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself. This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Webb, etc. This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft on the end, But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above. X-Axis Power Milling Machine x 1. We accept Payoneer only. The parcel maybe delay 1-2day of the weekend. Due to the bad weather, Holidays, Hot Season ect. The parcel maybe delay, If you have any problems, mssage us, we will try our best to solve it. We cannot deliver your order if your state is PR. Message us for return instructions. If you are not satisfied with the item for any reason, please do not quick to leave negative/neutral feedback even open request and case without any communication with us. We devote ourselves making EVERY CUSTOMER in 100% Satisfactory and resolve any problem.

About of the item. X-Axis power feed is made of aluminuml;Power Parameter:90Watt, 110V input voltage, 50/60Hz, single phase;Rotate Speed:0-200 RPM. Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min. This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acers, Webb, etc. AUTOMATIC AND MANUAL CONTROL? You have the option to operate this power feed in automatic mode at a constant speed, allowing you to work hands-free. Alternatively, you can manually adjust the speed control knob for more precise milling work. This versatile power feed provides excellent speed control throughout the entire range to meet your specific needs. Equipped with the Gleason Spiral Bevel Gear, this power feed ensures stable transmission ratio, minimal transmission noise, high efficiency, and superior bearing capacity. Additionally, it features a special safety device that protects the transmission plastic gear and electronic parts from damage in case of tool collision or instantaneous reversal during fast transmission. PORTABLE AND EASY TO INSTALL? Compact and portable, this milling machine power feed weighs only 3.75kg/8.27lbs and measures 73.512.8 inches in size. Whether you are a novice or a skilled operator, installing this power feed is a breeze. Just follow the instructions and online video or install it on your own. Designed to fit milling machines such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acers, Webb, and more, this power feed is versatile. It specifically fits vertical knee-type mills with the same mounting pattern and a 5/8 diameter shaft on the end. However, please note that it will not fit mills with a different mounting pattern or different sized leadscrews, such as Powermatic and some other irregularly sized machines. Therefore, please ensure that your machine follows the typical Bridgeport type mentioned above. The parcel maybe delay 1-2day of the weekend. Due to the bad weather, Holidays, Hot Season ect. The parcel maybe delay, If you have any problems, mssage us, we will try our best to solve it. Message us for return instructions. If you are not satisfied with the item for any reason, please do not quick to leave negative/neutral feedback even open request and case without any communication with us. We devote ourselves making EVERY CUSTOMER in 100% Satisfactory and resolve any problem. We will reply you as soon as we can.

Voltage: 110V, 50/60Hz Rotate Speed: 0-200 RPM Max Torque: 450 in-lb Max Feed Rate: 650 mm/min Max Return Speed: 850 mm/min Control: Automatic & Manual Size: 74.511.5 inch. X-Axis power feed is made of aluminuml;Power Parameter: 95Watt, 110V input voltage, 50/60Hz, single phase;Rotate Speed:0-200 RPM. Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min. AUTOMATIC AND MANUAL CONTROL? You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work. And this mulitfunctional milling machine power feed can work with excellent speed control in the entire range according to your needs. This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio, low transmission noise, high transmission efficiency and high bearing capacity. And when fast transmission, if the tool collides with the work piece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage. PORTABLE AND EASY TO INSTALL? This power feed for milling machine is compact and portable. Weight: 5kg/11lbs, Size: 74.511.5 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself. This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, A-cer, Webb, etc. This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft on the end, But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above. 1 x Power Feed for Milling Machine 8 x Adjustable Pad 2 x Travel Stop Assembly 1 x Adapter 1 x Bevel Gear 1 x Dial Nut 1 x Locking Nut 1 x Product Manual. We accept Payoneer only. The parcel maybe delay 1-2day of the weekend. Due to the bad weather, Holidays, Hot Season ect. The parcel maybe delay, If you have any problems, mssage us, we will try our best to solve it. We cannot deliver your order if your state is PR. Message us for return instructions. If you are not satisfied with the item for any reason, please do not quick to leave negative/neutral feedback even open request and case without any communication with us. We devote ourselves making EVERY CUSTOMER in 100% Satisfactory and resolve any problem.

VEVOR Milling Machine Power Feed. Our power table feed brings a stable transmission ratio and high load-bearing capabilities. Take control of speed with ease using the manual lever and automatic knob. Ideal for 5/8” end shaft diameter machines and X-axis milling machines. Experience efficiency and reliability like never before! Equipped with Gleason spiral bevel gears, our milling machine power feed ensures a stable transmission ratio, low noise output, high transmission efficiency, and excellent load-bearing capacity. With noise levels? 85dB, providing a conducive environment for your work or study without disruptions. Our power feed table mill is equipped with overload protection. In instances of rapid transmission, if there is a collision or instantaneous reversal between the tool and the workpiece, a special security mechanism safeguards the gearbox’s plastic gears and electronic components from damage. Our compact and lightweight power table feed is easy to install and operate. The control panel features clear functions, making the operation straightforward. Additionally, we provide a detailed installation and user manual, ensuring you have all the information you need to operate effectively. Our power feed milling machine comes with a set of sturdy metal parts that are built to last, including 1 x copper gear, 1 x install the retainer plate, 3 x fixing screws, 2 x limit switch springs, 15 x adjusting shims, 1 x bearing inner ring, and 1 x copper gear gasket. Ultimate High-Compatibility Solution: Our power feed table mill Includes everything needed to mount on most knee-type mills with a 5/8” end shaft diameter that shares the same installation pattern, such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, and others. Infinitely Variable Speed Control: With the continuously variable speed knob, you can adjust the speed according to your needs. Our milling machine power feed offers a rated torque of 450 in-lb(50.7 NM), a maximum speed of 200 RPM, a maximum feed rate of 965 mm/min, and a maximum return speed of 1385 mm/min. Highly Stable and Efficient: Featuring Gleason spiral bevel gears, our power table feed boasts stable transmission ratios, low noise, high transmission efficiency, and high load-bearing capacity. Plus, it comes with a special security device that protects the gearbox plastic gears, and electronic components from damage in the event of tool collision or sudden reversal during rapid transmission. Easy to Use, Manual or Automatic: Our power feed milling machine offers two different speed adjustment modes: manual and automatic. With manual control buttons, you can adjust the speed as needed. Alternatively, set the device to automatic constant speed mode for hands-free operation, making your milling tasks a breeze. Designed for X-axis Direction: This power feed woodworking enables smooth movement in the X-axis direction.

X-Axis Power Feed 450 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM. About of the item. X-Axis power feed is made of aluminuml;Power Parameter:90Watt, 110V input voltage, 50/60Hz, single phase;Rotate Speed:0-200 RPM. Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min. This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc. AUTOMATIC AND MANUAL CONTROL? You have the option to operate this power feed in automatic mode at a constant speed, allowing you to work hands-free. Alternatively, you can manually adjust the speed control knob for more precise milling work. This versatile power feed provides excellent speed control throughout the entire range to meet your specific needs. Equipped with the Gleason Spiral Bevel Gear, this power feed ensures stable transmission ratio, minimal transmission noise, high efficiency, and superior bearing capacity. Additionally, it features a special safety device that protects the transmission plastic gear and electronic parts from damage in case of tool collision or instantaneous reversal during fast transmission. PORTABLE AND EASY TO INSTALL? Compact and portable, this milling machine power feed weighs only 3.75kg/8.27lbs and measures 73.512.8 inches in size. Whether you are a novice or a skilled operator, installing this power feed is a breeze. Just follow the instructions and online video or install it on your own. Designed to fit milling machines such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, and more, this power feed is versatile. It specifically fits vertical knee-type mills with the same mounting pattern and a 5/8 diameter shaft on the end. However, please note that it will not fit mills with a different mounting pattern or different sized leadscrews, such as Powermatic and some other irregularly sized machines. Therefore, please ensure that your machine follows the typical Bridgeport type mentioned above. We accept Payoneer only. The parcel maybe delay 1-2day of the weekend. Due to the bad weather, Holidays, Hot Season ect. The parcel maybe delay, If you have any problems, mssage us, we will try our best to solve it. We cannot deliver your order if your state is PR. Message us for return instructions. If you are not satisfied with the item for any reason, please do not quick to leave negative/neutral feedback even open request and case without any communication with us. We devote ourselves making EVERY CUSTOMER in 100% Satisfactory and resolve any problem.

About of the item. X-Axis power feed is made of aluminuml;Power Parameter:90Watt, 110V input voltage, 50/60Hz, single phase;Rotate Speed:0-200 RPM. Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min. This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc. AUTOMATIC AND MANUAL CONTROL? You have the option to operate this power feed in automatic mode at a constant speed, allowing you to work hands-free. Alternatively, you can manually adjust the speed control knob for more precise milling work. This versatile power feed provides excellent speed control throughout the entire range to meet your specific needs. Equipped with the Gleason Spiral Bevel Gear, this power feed ensures stable transmission ratio, minimal transmission noise, high efficiency, and superior bearing capacity. Additionally, it features a special safety device that protects the transmission plastic gear and electronic parts from damage in case of tool collision or instantaneous reversal during fast transmission. PORTABLE AND EASY TO INSTALL? Compact and portable, this milling machine power feed weighs only 3.75kg/8.27lbs and measures 73.512.8 inches in size. Whether you are a novice or a skilled operator, installing this power feed is a breeze. Just follow the instructions and online video or install it on your own. Designed to fit milling machines such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, and more, this power feed is versatile. It specifically fits vertical knee-type mills with the same mounting pattern and a 5/8 diameter shaft on the end. However, please note that it will not fit mills with a different mounting pattern or different sized leadscrews, such as Powermatic and some other irregularly sized machines. Therefore, please ensure that your machine follows the typical Bridgeport type mentioned above. The parcel maybe delay 1-2day of the weekend. Due to the bad weather, Holidays, Hot Season ect. The parcel maybe delay, If you have any problems, mssage us, we will try our best to solve it. Message us for return instructions. If you are not satisfied with the item for any reason, please do not quick to leave negative/neutral feedback even open request and case without any communication with us. We devote ourselves making EVERY CUSTOMER in 100% Satisfactory and resolve any problem. We will reply you as soon as we can.

ALB-310SX X-Axis Power Feed Milling Drill Machine 200RPM 450in-lb. Product parameters – Name: electronic power feed, electronic feeders – Model: ALB-310SX (Horizontal) – Main motor power: 95w – Speed range: 0-200 – Maximum speed: 200RPM – Maximum torque: 450in-lb – Power Requirements: AC110V , 50 Hz – Applicable models: vertical turret milling machines, drilling and milling machine, other machinery. Package Content: 1 x ALB-310SX X-Axis Power feed Milling drill Machine 200RPM 450in-lb (as picture). Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “topcyberday” and is located in this country: US. This item can be shipped to United States.

• Model: ALB-310SX
• Machine Type: Vertical Milling Machine
• Main motor power: 95w
• Function: Drilling
• Speed range: 0-200
• Maximum speed: 200RPM
• Power Requirements: AC110V , 50 Hz
• Brand: Unbranded/Generic
• Voltage: 110 V

For more information on our products. Please send message to us. AS-250 150Lbs Torque Power Feed Milling Machine X-Axis ALSGS 0-200RPM. What Customers Have To About Us. Just As It Says, Got here fast. Have not used yet. Can’t wait to use it. Item was received quickly and was exactly as described. THANKS to a great Ebayer. “5++ Stars the product works wonders”. Extremely professional, takes care of cust. The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). 110 V, 60 Hz. 33 cm (13 inch). 20 cm (7.9 inch). 18 cm (7 inch). 6.5 kg(14.3 lb). AS-250-150 X-Axis Power Feed for Milling Machine. Set of Necessary Accessories. X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. All items are dispatched from our warehouse in HACIENDA HEIGHTS, CA. Some products may be dispatched in more than one carton. International Buyers – Please Note. If you have a problem with the product. We will require a picture of the damaged part for verification. We offer detailed product descriptions and images to give you a real advantage in finding the products you’re looking for. 25 years Industry Experience. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “happystore-01″ and is located in this country: US. This item can be shipped to United States.

• Rotate speed: 0-200 RPM
• Torque: 150 lbs
• Package size: 13\
• Gross weight: 6.5 kg(14.3 lb)
• Warranty: Lifetime
• UPC: 0895800908447
• EAN: 0895800908447
• Brand: VEVOR
• Function: Milling
• Control: Manual
• Machine Type: Milling Machine
• Power Source: Electric
• Max Spindle Speed (RPM): 200 RPM
• Voltage: 110 V
• Model: AS-250
• MPN: ZCXUN00525

Model: 450 in-lb X-Axis. Rotate speed: 0-200 RPM. Max torque: 450 lbs. Max feed rate: 650mm/min. Max return speed: 850mm/min. Package size: 12.60 x 11.22 x 7.87 inches. Package weight: 12.83lbs. Your Best Online Business Partner. X-Axis Torque Power Feed Milling Machine 450lbs 200 RPM Adjustable 5/8 Shaft. 12.60 x 11.22 x 7.87 inches. X-Axis 450lbs Torque Power Feed Milling Machine 200 RPM Adjustable 5/8 Shaft. X-AXIS POWER FEED- Made of aluminum material. Rotate Speed: 200 RPM, Max Torque: 450lbs. Rotate speed- 0-200 RPM; Max torque: 450 in-lb; Max feed rate: 650mm/min; Max return speed: 850mm/min. Ergonomic Design- Power feed is equipped with safety feature to protect transmission gear and electronic components as to meet the requirements of ergonomics. Easy Setup- Small volume and easy installation, noiseless direction changes. Fit almost any horizontal knee type milling machine and other small machinery. Excellent speed control in the entire range. The speed can be adjust according to operator’s requirement. 1 x Power Feed For Milling Machine. 8 x Adjustable Pad. 2 x Tiavel Stop Assembly. 1 x Adapter; 1 x Bevel Gear. 1 x Dial Nut ;1 x Locking Nut. 1 x Product Manual. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We are always listening to the customers and colleagues to keep innovating our products and service. Aluminum Emergency Hardware Door Push Bar Panic Exit Device Lock 28 – 36 in. 12V DC 155W Electric Fuel Transfer Pump Big Flow Rate With Fuel Meter Nozzle. 6T Machine Skates Heavy Duty Dolly Machinery Roller Movers Cargo Trolley 2Pcs. 6T 13200lb Machine Skates Heavy Duty Dolly Machinery Roller Movers Cargo Trolley. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “enterity” and is located in this country: US. This item can be shipped to United States.

• Machine Type: Mini Milling Machine
• Max feed rate: 650 mm/min
• Brand: Enterity
• Control: Manual
• Max return speed: 850 mm/min
• Style: X-Axis/450LBS
• Voltage: 110V, 50/60Hz
• Material: Iron, PVC
• Power Source: Electric
• MPN: 164137-Enterity
• Custom Bundle: No
• Rotate speed: 0-200 RPM
• Modified Item: No
• Max torque: 450 lbs
• Color: White
• Dimension: 12.60 x 11.22 x 7.87 inches
• Table Length: Table Length
• Weight: 12.83 lb
• Country/Region of Manufacture: China

The machine is used for X axis, if you want to used for Y axis, a SUPPORT PLATE will be needed. Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8 Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First… The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time. Speed can be adjust according to operator’s requirement, ranging from 0-9. Normally, jog switch should be at “FEED” position. For jog movement, just switch to “0″ position. Kept holding the switch until it travels to requires position. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement. Make sure the power feed stops before you change the direction. The switch should be in the “OFF” position when the machine is not in use or before plugging. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 5mm (front and back brush should be replaced together). Voltage : 110 V, 60 Hz. Rotate speed : 0-200 rpm. Length : 33 cm (13 inch). Width : 20 cm (7.9 inch). Height : 18 cm (7 inch). Gross weight : 6.5 kg(14.3 lb). 1 x AS-250-150 X-Axis Power Feed for Milling Machine. 1 x Set of Necessary Accessories. 1 x Product Manual. X-axis power feed for Bridgeport type milling machines. Reversible and auto shut-off at end of cut. Limit switch for sensitive stop. No loss of dial or hand crank. Small volume and easy installation. Excellent speed control in the entire range. Power table feed won’t vibrate or strain in low speed. Direction control knob for easy and rapid operation. Safety feature to protect transmission gear and electronic components. Please contact our customer service team immediately if: 1. You changed your mind and wish to request a return. Your product was damaged during transit. Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. We will require a picture of the damaged part for verification. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “fansdealonline” and is located in this country: US. This item can be shipped to United States.

• Voltage: 110V
• Rotate speed: 0-200 RPM
• Torque: 150 lbs
• Package size: 13\
• Gross weight: 6.5 kg(14.3 lb)
• Warranty: 5 Years
• Function: Milling
• Machine Type: Milling Machine
• Power Source: Electric
• Control: Manual
• UPC: 0895800908645
• EAN: 0895800908645
• Brand: VEVOR
• Model: AS-250-150
• MPN: ZCXZG0085