Nice fully functional mill that can be used as a manual machine or with the CNC control in X & Y. The table and ways are all in good shape with no damage or scarring. Southwestern Industries Trak K3 2-axis CNC Knee Mill. 3HP 230/460 3-phase motor. Proto Trak Edge CNC controller. 10″ x 50″ table. DRO for all 3 axis. Kurt power draw bar. Located in Peoria, AZ. If you are nearby and wish to pick it up I have a forklift to load.

Bridgeport 2 Axes CNC Milling Machine S/N. Machine Has Been Completely Serviced Including All New Bearings In The Head. Our Service Tech Is A Former Bridgeport Employee With Over 45 Years Experience. Table Size 9″ x 48″. Vertical Knee Travel 16. Spindle Speeds (Variable) 60-4200 RPM. Spindle Quill Travel 5. Positioning Speed (X-Y Axis) 100 IPM. Feed Rate (X-Y Axis, Variable) 0.1-100 IPM. Spindle Quill Feeds (3) 0.0015″ – 0.003″ – 0.006. Distance, Table To Spindle Nose 2 1/2″ – 18 1/4″. Throat Distance 6 3/4″ – 18 3/4″. DX-32 Control with 6.0 Upgraded Software. Flood Coolant Tray and Pump. Videos Are Available for Serious Buyers. Machine is Available For Inspection and is Located in Bridgeport CT. Crating or Skidding is Extra. We sell new and used Bridgeport parts for both Series I and Series II Bridgeport Machines. Bridgeport Milling Head Repair, Inc.

This listing is for a Bridgeport milling machine. We don’t typically handle this type of item and as such don’t know a lot of the technical information regarding this item. If you need anymore information please message us. Item was in operation when fabrication plant was shut down, however I did notice it’s missing the table. It may have other pieces that are not there as well, hence the discounted price. We will guarantee the motor to function, but as far as the other components or potentially missing items we can not. All of our parts have been tested and are in working condition unless otherwise stated! Please keep in mind that all of our parts are used, and we do our best to clean them, some items may require a little further cleaning once received. Thanks for looking at our listing we are looking forward to getting you fixed up and in tip top shape. We have collectively almost 70 years experience in the automotive industry and look forward supplying you with whatever needs you have.

The convenience lies in its capabilities. To add a feature to your program, simply press the function key and then follow the prompts. Spindle Drive: 2 HP Variable Speed Head.

Type: Vertical Milling Machine. Nice machine ready to go back into service. Lots of extras with this mill. You can inspect in person or watch the video.

This is a USED Alliant 2-Axis CNC ProtoTrak A. 2 Knee Type Milling machine with a 3rd Axis digital readout feature. It is a Model #RT2 with a serial number of 00515666 that has a variable speed R8 spindle that is 3 HP, 220/440-Volt, 3-Phase controls. It has a 9″x42″ table with one-shot lube and we are including a 6 Kurt Vise, R8 Collets and Kurt Power Drawbar! E b a y Stores And check out our website with over 300,000 items in stock! It is fully interactive and will show you current pricing and stock availability on thousands of items! Or register today & open an account to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S Catalog, with listings of popular items from all the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Guhring, Clausing, Jet, Precision Twist-Dormer, Wilton, Norton, Starrett, Allied, Mitutoyo, YG-1 Keo, Brown & Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers from 1mm to 20mm….. Hundreds of special taps from #000 to 4, endmills, toolholders, abrasives, fasteners, machinery and much more. Give us a call! This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tstoolsupplycompany” and is located in this country: US. This item can be shipped to United States.

• Spindle Horsepower: 3 HP
• Machine Type: Knee Mill
• Table Length: 42\
• Power Source: Electric
• MPN: RT2
• Spindle Taper: R8
• Function: Milling
• Brand: Alliant
• Table Width: 9\
• Control: CNC
• Voltage: 220/400 Volr

For sale Emco Concept Turn 55 PC controlled 2-axis CNC tabletop turning machine , unit is used , clean and come with computer with software and extral item show in the photo. The item “Emco Concept Turn 55 PC controlled 2-axis CNC tabletop turning machine” is in sale since Tuesday, September 7, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “alvin1462″ and is located in Singapore, default. This item can be shipped worldwide.

• Model: Concept Turn 55
• Modified Item: No
• Country/Region of Manufacture: Austria
• Machine Type: Horizontal Milling Machine
• Model Year: 2006
• Power Source: Electric
• Function: Milling
• Brand: Emco
• Control: CNC

200 7 H AAS VF-3. In very good running condition. Under 6,000 spindle hours. 4th and 5th axis ready. We are including a new Haas TR-200Y 2-axis rotary table that arrived at our location in original crate. This 2007 Haas VF-3 is available to view under power. Made entirely in The U. 20 Horsepower Vector Drive Motor. 24 Station, Side Mount Tool Changer. Easy-Access Roll-Out Coolant Tank. USB Drive and Dual RS232 Ports. 195 to 260 VAC 3-Phase Power. Heavy-Duty Sheet metal Enclosure. 15,000-RPM High Speed Spindle. Fast 1000 Inch Per Minute Rapids. Includes a New Haas TR-200Y 2-Axis Rotary Table / Trunnion. Spindle Nose to Table (min). Spindle Nose to Table (max). Number of Std T-Slots. Max Weight on Table (evenly distributed). Direct Speed Belt Drive. Max Torque w/opt Gearbox. Max Tool Diameter (full). 113 L/min, 6.9 bar. Power (options may increase requirement). 195-260 VAC/50 A 354-488 VAC/30 A. Specifications based on catalog brochure and subject to verification. As with any piece of equipment, new or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item’s cosmetic condition. Items over 12,000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. These movers will be using specialty equipment which increases the cost of their service. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 102″ x 118″ x 110 H. MACHINE WEIGHT: 12,500 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. The item “2007 HAAS VF-3 CNC 50×20 VERTICAL MILL 15k-RPM with NEW TR-200Y 2-Axis Rotary” is in sale since Wednesday, February 12, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machinery_exchange” and is located in Chatsworth, California. This item can be shipped to United States.

• Model: VF-3
• Country/Region of Manufacture: United States
• Machine Type: Vertical Milling Machine
• Model Year: 2007
• Power Source: Electric
• X-Axis Travel Bed: 36 in – 40 in
• Spindle Taper: CAT 40
• Function: Milling
• Brand: Haas
• Control: CNC

This is a Bridgeport Knee Type Milling Machine and is a serial number BR 220761. It has a R8 spindle, 9″x48″ table and has a step pulley head with 16 spindle speeds from 67 to 2720 RPM’s. The head is 1 H. 230/460 volt 3-phase and we think it has chrome bed ways by the way it is flaked, but cannot confirm. It includes several nice accessories, a 6 Bridgeport Vise, worklight, one-shot lube system, collet rack and a inch/metric Acu-Rite II digital readout system. E b a y Stores And check out our website with over 300,000 items in stock! It is fully interactive and will show you current pricing and stock availability on thousands of items! Or register today & open an account to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S Catalog, with listings of popular items from all the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Guhring, Clausing, Jet, Precision Twist-Dormer, Wilton, Norton, Starrett, Allied, Mitutoyo, YG-1 Keo, Brown & Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers from 1mm to 20mm….. Hundreds of special taps from #000 to 4, endmills, toolholders, abrasives, fasteners, machinery and much more. Give us a call! The item “USED Bridgeport Milling Machine with Acu-Rite 2-Axis DRO, 6 Vise, Worklight” is in sale since Wednesday, March 18, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tstoolsupplycompany” and is located in Holland, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Model: Step Pulley
• Spindle Horsepower: 1 H.P.
• Machine Type: Milling Machine
• Table Length: 48″
• Power Source: Electric
• Spindle Taper: R8 Spindle
• Function: Drilling
• Brand: Bridgeport
• Table Width: 9″
• Control: Manual
• Voltage: 230/460 3-Phase

Have a machine or an entire facility to sell? Turn your surplus into CASH! Bridgeport J-Head Vertical Milling Machine w/ 2-Axis DRO. 80 – 135 – 210 – 325. 660 – 1,115 – 1,750 – 2,720 RPM. 220V / 440V / 3Ph / 60Hz. 57 LR x 59 FB x 76 H. If any other information is needed to help you with quoting, please send us a message. Cash, wire transfers, or company checks are welcome and encouraged. This guarantee applies only to machines, which we own. Shall not be responsible for any damages done by truckers, riggers, or other parties. All machine prices include loading unless otherwise stated. Machinery descriptions are intended as a guide only and their accuracy is not guaranteed. There are no warranties which extend beyond the description of the face hereof. Quotations subject to change without notice. It is the buyers and users responsibility to provide proper safety devices, training and equipment to safeguard the operator from harm for any particular use, operation or set up, and to adequately safeguard the machine, or machines, to conform to all Federal, State and Local Government Safety Standards and All Industry Safety Standards. The item “Bridgeport J-Head Vertical Milling Machine with 2-Axis DRO & Chrome Ways ID# M-072″ is in sale since Thursday, May 9, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Milling”. The seller is “energ_machinery” and is located in East Hampton, Connecticut. This item can be shipped to United States.

• Ram Travel: 12″
• Spindle Speeds(Variable): 80-135-210-325-660-1,115-1,750-2,720 RPM
• Spindle Nose Taper: R 8
• Spindle Motor: 1 HP
• Featured Refinements: Vertical Milling Machine
• Model: J-Head
• Brand: Bridgeport
• Table Size: 9″ x 42″
• Longitudinal Table Travel: 30″
• Saddle Cross Travel: 12″
• Knee Vertical Travel: 16″
• Spindle Quill Travel: 5″