Used Deckel Motor cover vent for Deckel Milling Machine not sure which, either the FP2 or FP3. Size is 17-1/4″ wide at base, 12-7/8″ tall. The bottom bolt holes are 15-3/4 on center apart. Please See additional Pictures Below the Description. This sale is for Used Deckel Motor cover vent for Deckel Milling Machine not sure which, either the FP2 or FP3. A scale shown is for size reference only and not part of the sale. Thank you for looking Please check my other auctions of precision watchmakers, machinist’s tools and other unique items. All items are described to the best of my ability and questions are encouraged. I have No way to know when and if these charges will be applied. It is understood that by purchasing any item the purchaser assumes all liability and holds harmless and indemnifies JSR & Father Industrial Machinery & Supplies Inc. And its directors against any damage or penalties associated with: 1. Compliance to current or future laws, rules or regulations pertaining to the use or possession of any equipment device or components, 2. Any property damage caused directly or indirectly by the use, operation or possession of any equipment, device or component. Machine Safety: it is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use, operation or setup, and to adequately safeguard the machine, or machines, to conform to all Federal, State and Local Government Safety Standards and All Industry Safety Standards. Auctiva offers Free Image Hosting and Editing. Track Page Views With. Auctiva’s FREE Counter.

Deckel maho 70 Evolution.

Deckel gk21 pantograph spindle (read). This is an inherited project but appears to be complete except the spindle nut. No spindle nut is included! It appears that someone took this apart and cleaned it, even got new bearings, but possibly didn’t put it back together correctly. I think a bearing race may need pulled to correctly reassemble it. I’d be happy to take any additional photos or whatever is need to itemize all parts are there besides the missing spindle nut. This would be a great candidate to grind a new shaft with an ER collet taper. Stefan Gotteswinter covered it in a youtube video.

Deckel GK21 Pantograph main spindle. Came off a pantograph that was disassembled for parts. Spindle spins smoothly and freely and actuates up and down easily by using the lever.

For sale is an original Deckel milling/engraving spindle off of a GK21 pantograph (serial #56079). This comes with six authentic Deckel collets, which sizes include 1/8″, 4mm, 3/16″, 1/4″, 5/16″, and 3/8. I have included a few pictures with dimensions, but will gladly answer any other questions. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “andrewp81090″ and is located in this country: US. This item can be shipped to United States.

• Model: Deckel GK21 Pantograph Milling
• Brand: Deckel
• Function: Milling
• Machine Type: Pantograph

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices – Fast & Easy. 28 Tbl 3HP Spdl Deckel FP2 UNIVERSAL MILL, Horizontal/Vertical Head, Slotting He. 28 Table 3HP Spindle Deckel FP2 UNIVERSAL MILL, Horizontal/Vertical Head, Slotting Head, Tooling. Ref # : 161852 iammdna XMILLU. DECKEL UNIVERSAL HORIZONTAL/VERTICAL MILL. MODEL: FP-2, S/N: 6153. NUMBER OF SPINDLE SPEEDS………….. 40 – 2000 R. RATIO BETWEEN ANY TWO CONSECUTIVE. RATIO BETWEEN MINIMUM & MAXIMUM. TAPER HOLE IN SPINDLE NOSE……….. HEADSTOCK HORIZONTAL TRAVEL, POWER. BEARING SLEEVE, ONE REVOLUTION OF. OF SCALE DRUM EQUALS…………… 0.5 (12.7mm). BEARING SLEEVE, ONE SCALE DRUM. KNEE TABLE WORK CLAMPING AREA…….. FIXED ANGULAR TABLE CLAMPING AREA…. 28″ x 13″ (711x330mm). 15.75 (390 mm). 0.3 – 16 IN. POWER RAPID TRAVERSE RATE………… 45/min (1,143 mm). WORKTABLE HORIZONTAL FEEDSCREW, ONE. REVOLUTION OF SCALE DRUM EQUALS…. 0.10 (2.5 mm). WORKTABLE ELEVATING SCREW, ONE. HEADSTOCK FEEDSCREW, ONE REVOLUTION. ONE SCALE DRUM DIVISION EQUALS……. 0.001 (0.0254mm). OVERALL HEIGHT OF MACHINE, EXCL. 82-11/16″ x 94-1/2″ IN. NET WEIGHT OF MACHINE INCL. ARBOR SUPPORT & ARBORS. 3 HORSE POWER SPINDLE MOTOR. INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE. Play YouTube Video of this Item. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machineryvaluesinc” and is located in this country: US. This item can be shipped to North, South, or Latin America.

• Brand: Deckel
• Machine Type: HORIZONTAL MILLING MACHINES w/ UNIVERSAL TABLE
• Model: FP2
• MPN: FP2
• Control: Manual
• Function: Milling

Machine Type: Vertical Machining Center CNC. Make: Deckel Maho, DMC, DMG. Model: DMC 64 V Linear. Voltage: 400v / 3PH – Comes with step up transformer 208v to 400v. Spindle Power: 22 hp. Spindle speed: 8,000 RPM. # ATC: 30 (16 Usable). Minimum Floor-space Required: Width(front of machine) 115″ x Length(side of machine) 180″ x Height 130. Dimensions: Main Unit: W 115″ x L 93″ x 125. Dimensions: Coolant Filtration Unit: W 48″ x L 80″ x H 60. Dimensions: Chip Conveyor Unit: W 48″ x L 132″ x H 60. Fanuc 180i CNC Control – Network, USB and Hard Drive Interfaces. TSC – Thru Spindle Coolant. Coolant Filtration System with Internal Wash Down System. Comes with Step Up Transformer 208v to 400v. Sub-Plate Included – VISES ARE NOT INCLUDED. All Control, Machine, Electrical Diagrams included. Power On: 43,200/hrs. Currently being used – Running Parts – Can be Inspected. VISES ARE NOT INCLUDED. We can help with locating a local rigger! This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “streetsidetools” and is located in this country: US. This item can be shipped to United States.

• Model: 64V Linear
• Spindle Horsepower: 22 hp
• Country/Region of Manufacture: Germany
• Machine Type: Machining Center
• Table Length: 20 in – 24.9 in
• Max Spindle Speed (RPM): 8000
• Model Year: 2004
• Power Source: Electric
• X-Axis Travel Bed: 25.2
• Y-Axis Travel Bed: 23.625
• Z-Axis Travel Bed: 19.6
• Spindle Taper: CAT 40
• Function: Drilling, Milling
• Brand: DMG MORI
• Table Width: 20 in – 24.9 in
• Control: CNC
• Voltage: 400V

Deckel KF12 Copy Mill. Good condition, Has collet wrenches for spindle and stylus holder. Dozen small styli included. 3 spindle nuts and 3 stylus nuts included. Spindle collets: one 1/4, two 3/8, one 1/2, one collet adapter. Stylus collets: two 1/8, two 1/4, two 5/16, two 3/8, two 1/2. Included is a reversing attachment (not shown), can be used to create a “left hand” shape from a “right hand” model. Advanced for the time! This is a KF12, NOT a KF1. KF12 has the power knee that saves a lot of hand cranking up and down and allow for faster setup and tool changes. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “pilotbutte123″ and is located in this country: US. This item can be shipped to United States.

• Brand: Deckel
• Function: Milling
• Control: Manual
• Machine Type: Milling Machine
• Voltage: 480 V
• Model: Deckel KF12

Machine Type: Vertical Machining Center CNC. Make: Deckel Maho, DMC, DMG. Model: DMC 64 V Linear. Voltage: 400v / 3PH – Comes with step up transformer 208v to 400v. Spindle Power: 22 hp. Spindle speed: 8,000 RPM. # ATC: 30 (16 Usable). Minimum Floor-space Required: Width(front of machine) 115″ x Length(side of machine) 180″ x Height 130. Dimensions: Main Unit: W 115″ x L 93″ x 125. Dimensions: Coolant Filtration Unit: W 48″ x L 80″ x H 60. Dimensions: Chip Conveyor Unit: W 48″ x L 132″ x H 60. Fanuc 180i CNC Control – Network, USB and Hard Drive Interfaces. TSC – Thru Spindle Coolant. Coolant Filtration System with Internal Wash Down System. Comes with Step Up Transformer 208v to 400v. Sub-Plate Included – VISES ARE NOT INCLUDED. All Control, Machine, Electrical Diagrams included. Power On: 43,200/hrs. Currently being used – Running Parts – Can be Inspected. VISES ARE NOT INCLUDED. We can help with locating a local rigger! This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “streetsidetools” and is located in this country: US. This item can be shipped to United States.

• Model: 64V Linear
• Spindle Horsepower: 22 hp
• Country/Region of Manufacture: Germany
• Machine Type: Machining Center
• Table Length: 20 in – 24.9 in
• Max Spindle Speed (RPM): 8000
• Model Year: 2004
• Power Source: Electric
• X-Axis Travel Bed: 25.2
• Y-Axis Travel Bed: 23.625
• Z-Axis Travel Bed: 19.6
• Spindle Taper: CAT 40
• Function: Drilling, Milling
• Brand: DMG MORI
• Table Width: 20 in – 24.9 in
• Control: CNC
• Voltage: 400V