Draw Bar For Mill.

Bridgeport SERIES 1 KNEE MILL Power draw bar thrust plate BP 12625480 LOT OF 2 NEW OLD STOCK. UNABLE TO FIND ALL MAKES AND MODELS THESE FIT. ONLY WHAT IS SHOWN INCLUDED.

Maxi Torque-Rite R-8 Draw Bar DB-273-H.

USED, MACHINE SHOP MADE, INDEX HEAD. IT COME WITH A DRAW BAR FOR 5C COLLETS, BUT THE SPINDLE WILL NEED A TAPER ADAPTER SLEEVE FOR 5C COLLETS. NO TAPER ADAPTER SLEEVE INCLUDED. THE SPINDLE TURNS FINE. THE INDEX PIN CATCHES THE INDEX HOLES. SOME OF THE HOLES HAVE WEAR ON THEM. THERE ARE MEASUREMENTS IN THE PICTURES. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

Nichols Arbor Draw BarSpecifications: Milling machine 50 taper NMTB 1. Good used condition, but metal does have a little bit of wear from being used. Approximate Weight – 7 lbs. Part Number – N/A. Includes – Draw bar. Additional Information – 11 3/4 overall. End is 0.5625. Items can be picked up. My shop is located 10 miles southeast of St. Louis, MO in Millstadt, IL 62260. Forklift loading is FREE. Ensure the item will fit your needs. ASK QUESTIONS BEFORE PURCHASING.

USED, MACHINE SHOP MADE, INDEX HEAD. IT COME WITH A DRAW BAR FOR 5C COLLETS, BUT THE SPINDLE WILL NEED A TAPER ADAPTER SLEEVE FOR 5C COLLETS. NO TAPER ADAPTER SLEEVE INCLUDED. THE SPINDLE TURNS FINE. THE INDEX PIN CATCHES THE INDEX HOLES. SOME OF THE HOLES HAVE WEAR ON THEM. THERE ARE MEASUREMENTS IN THE PICTURES. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

USED, MACHINE SHOP MADE, INDEX HEAD. IT COME WITH A DRAW BAR FOR 5C COLLETS, BUT THE SPINDLE WILL NEED A TAPER ADAPTER SLEEVE FOR 5C COLLETS. NO TAPER ADAPTER SLEEVE INCLUDED. THE SPINDLE TURNS FINE. THE INDEX PIN CATCHES THE INDEX HOLES. SOME OF THE HOLES HAVE WEAR ON THEM. THERE ARE MEASUREMENTS IN THE PICTURES. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES. CHECK OUT MY OTHER LISTINGS. NO WARRANTIES GIVEN OR IMPLIED. International Buyers – Please Note. I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.

This air operated power draw bar comes complete with a 3/4 socket. It uses your stock milling machine drawbar, and if your drawbar is not a 3/4 inch DB, you can use any size socket you desire, the butterfly impact is a 3/8 in model. This power drawbar will fit Bridgeport and most other import. Also included is a pressure regulator unit, you simply bolt the power draw bar to the top of your mill using two 1/4-20 bolts, and connect the air supply, the regulator is preset to 90 psi, and believe me its more than enough pressure to do the job. Please note: This will not fit the Bridgeport J head machines… J-head power drawbars include 3 spacers for mounting. Please Note Concerning Mounting. There are 12 mounting holes, drilled on a 4.35 inch bolt hole circle. If you have a Bridgeport clone or other milling machine, measure your mounting holes to determine if this product will fit your mill. If your holes do not line up, this product can still work if you are willing to locate, drill and tap 2 mounting holes. Measure and be sure, thanks!

Some parts are visually broken as shown in listing photos. Overall condition is unknown, also parts may be missing. It came off a brand new 2023 Republic Lagun vertical milling machine.

Item DetailsCentering Plug with 1″-8 Draw Bar Thread ISA50 2-1/2″ 13532. Cell Phones & Accessories. We will take care of you! Clothing, Shoes & Accessories.