Antique hollow chisel mortiser or simple milling machine — has a 1/2hp Dayton electric motor mounted to a movable table on dove-tailed joint attached to a linear screw drive with a hand-wheel at the top — app. Travel — this table unit is mounted with swivels on each side of the heavy duty base, held on by clamping screws, that allow one to tip the table back 90 degrees — – motor is rated 115VAC / 60hz / 6 amps / 3450 rpm — – unit is about 24 in. High to the back of the iron motor frame below the pulley and crank // base is app. 9 by 14 in. // motor table is 9 by 12 in. // weighs about 200 pounds — – this was used in a chainsaw repair shop to recut the slots in chainsaw bars. Free Local pick-up is an option. Thank you for visiting our site.

The product is a 1 HP Bridgeport milling machine replacement head parts housing assembly, designed for milling functions. This manual control milling machine with a electric power source features a spindle horsepower of AAAA, X-axis travel bed of 36 inches to 40 inches, and Y-axis travel bed of AAAA. Made in the United States, this milling machine is suitable for various machining applications, specifically in the metalworking industry. The replacement head parts housing assembly ensures the continued functionality and performance of the Bridgeport milling machine, catering to the needs of businesses and industrial users requiring precise and efficient milling capabilities. No motor we do have other listing with a motor.

400R KM12 High-Gloss Fast Feed Flying Cutter Head 45° Angle Multi-Edge Milling. This high-performance 400R KM12 flying cutter head is designed for right-angle, 45-degree milling operations in CNC machining centers. Constructed from aviation-grade aluminum alloy, the cutter head undergoes heat treatment and precision refinement to ensure durability, strength, and superior machining accuracy. The cutter head features accurately positioned blade slots and tapping teeth, providing consistent cutting performance and reducing the risk of tool bounce. Its multi-edge design allows efficient material removal and high-speed machining, making it ideal for fast-feed milling applications. Available in a variety of sizes and tooth configurations to meet different machining requirements. High-strength aviation aluminum alloy construction. Precision blade slots and tapping teeth for accuracy. Reduced tool bounce for smoother operation. Multi-edge design enables efficient fast-feed machining. Durable and heat-treated for long-lasting performance. KM12-50-22-4T Flying Cutter Head. KM12-63-22-4T Flying Cutter Head. KM12-80-22-5T Flying Cutter Head. KM12-100-22-6T Flying Cutter Head. KM12-125-27-6T Flying Cutter Head. KM12-160-27-8T Flying Cutter Head. KM12-100-27-6T Flying Cutter Head. KM12-100-32-6T Flying Cutter Head. KM12-125-32-6T Flying Cutter Head. KM12-125-40-6T Flying Cutter Head. KM12-160-32-8T Flying Cutter Head. KM12-160-40-8T Flying Cutter Head. KM12-200-27-8T Flying Cutter Head. KM12-200-40-8T Flying Cutter Head. KM12-250-40-10T Flying Cutter Head. We will send according to your order. Please note that delays may occasionally occur due to factors beyond our control, such as flight disruptions, holidays, weather conditions, local postal delays, or natural disasters. Your satisfaction is our priority! Additionally, we offer a 60-day return guarantee on all items.

50 TAPER RIGHT ANGLE MILLING HEAD W/ DRIVE GEAR. 11 1/2 BACK TO CENTER SPINDLE.

Precautions for using angle milling head 1. Check whether the weight of the angle milling head meets the weight requirement of the machine tool magazine. (If not, it is recommended to install the angle milling head manually) 2. Check whether the fastening bolts are loose before the angular milling head is installed and processed. Check whether the positioning pin of the angle milling head is fastened with the groove of the fixing block. Check whether the limit pin is completely detached from the positioning ring before use. Do not use the angle milling head continuously for a long time. It is recommended to stop the machine for 5 minutes after 2 hours of machining to prevent overheating of internal parts such as bearings and gears inside the angle milling head. Use a grease gun to inject a small amount of grease every week to lubricate the gears. Do not use the angle milling head when you need to do a good anti-corrosion treatment. Strictly prohibit the use of angle milling head more than the maximum speed range of speed, general use of the maximum speed of 70% of the maximum speed, can be used for a short period of time the highest speed. It is strictly prohibited to strike the angle milling head shell vigorously to prevent the internal bearing gears and other parts from being broken. Keep the input shank and output taper clean when using the angle milling head. Before installing a cushion at the bottom to prevent the angle milling head from dropping the american mushrooms name countenance legs sticky calabash amber tailored like a person.

(NMTB 50) heavy-duty tool holder. The 1 1/2 Dimension. Designation refers directly to the size of the. Shell mill arbor pilot diameter. Or the compatible cutter range, rather than the overall cutting width of the indexable head attached to it. The assembly is comprised of two distinct components merged together: the upper. Enco tool holder shank. And a large, multi-insert indexable. Face milling cutter head. Locked tightly to the arbor nose using driving keys and a central locking screw.

AG90 BT40 ER11 90° Angle Head · CNC Milling Cutter Side Milling Head 1:1 Ratio 5000RPM. [BT40 Precision Shank] Ground 7:24 taper for perfect spindle fit and automatic tool changer compatibility. [360-Degree Rotation] Full continuous rotation with engraved scale for multi-directional machining without repositioning. [ER11 Collet System] Standard ER11 output accepts tools from 1mm to 7mm diameter with excellent runout accuracy. [40Cr Alloy Steel] Full heat-treated construction ensures maximum rigidity, durability, and dimensional stability. [1:1 Direct Drive] Spiral bevel gears transmit full 12Nm torque and 1.5KW power at 5000 RPM maximum speed. [Grease Lubrication] Sealed-for-life bearing arrangement with grease lubrication for 1000-hour service interval. [Left/Right Rotation] Reversible rotation direction compatible with clockwise and counter-clockwise spindle operation. [Complete Tool Set] Includes wrenches, mounting block, pull stud, and storage case for immediate use. Overview: This AG90 BT40-ER11-80-70 90° Angle Head is a precision-engineered accessory that converts vertical spindle rotation to horizontal orientation on CNC machining centers. Built from high-grade 40Cr alloy steel with full heat treatment, it delivers exceptional rigidity and accuracy for side milling, slotting, face milling, and contouring. The 1:1 direct drive transmits full spindle speed and torque without reduction, ensuring maximum cutting efficiency. Featuring a precision-ground BT40 taper shank and ER11 collet output (tool Ø up to 7mm), the integrated 360° continuous rotation allows positioning at any angle around the vertical axis, expanding the capability of standard VMCs. With 5000 RPM and 12 Nm torque, it suits steel, aluminum, and alloy materials in mold, aerospace, automotive, and general precision engineering. 90 Degree Angle Head for CNC Milling. BT40 (7:24 Taper, Precision Ground). ER11 (Max Tool Diameter 7mm). 1:1 Direct Drive. Left / Right (L/R Reversible). 90 Degrees (Precision Spiral Bevel Gears). 40Cr Alloy Structural Steel (Full Heat Treated). Grease Lubrication (Sealed For Life). 360 Degrees Continuous Rotation. 178.7 x 65.5 x 65.5 mm (7.0″ x 2.6″ x 2.6). Net Weight / Gross Weight. 4.9 kg (10.8 lb) / 8 kg (17.6 lb). 46 x 39 x 27 cm (18.1″ x 15.4″ x 10.6). Read all safety instructions before use. Rotating machinery and sharp cutting tools can cause severe injury. Trained Personnel Only: This angle head is for use by qualified machinists and CNC operators only. Do not operate without proper training. Never Exceed Rated Speed: Do not exceed 5000 RPM. Excessive speed can cause bearing failure, gear damage, and catastrophic tool breakage. Never Exceed Rated Torque: Do not exceed 12 Nm. Overloading the gear train causes permanent damage. Secure Locking: Ensure rotation lock screws are fully tightened before machining. A loose head can rotate during cutting. Pull Stud Tightness: Verify pull stud torque before each use. Loose stud can cause head separation from spindle. Taper Surface Protection: Keep BT40 taper clean and undamaged. Scratches cause runout and vibration. Proper Tool Installation: Ensure cutting tools are seated and ER11 nut tightened. Loose tools can eject at high speed. Guards and Enclosures: Always operate with machine guards closed. Never reach into machining area while spindle rotates. Coolant and Chips: Use appropriate coolant directed at cutting zone. Hot chips can cause burns; wear safety glasses. Inspection Schedule: Inspect before each use for wear, damage, or loose fasteners. Stop immediately if abnormal noise/vibration occurs. Storage: Store in clean, dry environment. Apply rust preventive oil to precision surfaces. Do not stack heavy objects. No Modifications: Do not modify, disassemble, or repair. Precision BT40 Taper Shank Input. Precision-ground BT40 7:24 taper, strict accuracy for perfect concentricity and repeatability. Maximum contact area, excellent torque transmission, minimal runout. Integrated pull stud for ATC integration, stable cutting up to 5000 RPM. 360° Continuous Rotation with Scale. Precision-machined graduated scale ring encircles blue anodized body. Full 360° rotation, lock at any angle. Fine markings 0-350° for multi-directional machining, reduces setup time, expands working envelope. ER11 High-Precision Collet Output. Standard ER11 collet system, tool Ø 1-7mm. Excellent gripping force and runout accuracy. ER11A spanner wrench included. Dynamically balanced for 5000 RPM, minimizes vibration. 40Cr Alloy Steel · Full Heat Treatment. Entire body and gears from 40Cr chromium-alloy steel. Quenched and tempered for hardness and toughness. Case-hardened spiral bevel gears, smooth power transmission, minimal backlash. 1:1 Direct Drive · High Torque. Precision 1:1 spiral bevel gear pair delivers full spindle power (12 Nm, 1.5 KW) without reduction. Greater tooth contact, quieter operation, higher load capacity, 1000-hour service life. Complete Professional Tooling Set. Includes ER11A spanner, 17mm open-end wrench, mounting block, pre-installed pull stud, durable storage case. Ready for immediate installation and operation. ITEM OPERATING INSTRUCTION. Clean BT40 taper, check ER11 chuck rotates freely. Install the Pull Stud: Tighten pull stud to specified torque. Loose stud can cause disengagement and injury. Set the Output Angle: Loosen lock screws with 17mm wrench, rotate head to desired angle using scale, tighten firmly. Mount in Machine Spindle: Clean spindle bore, load angle head via ATC or manual insertion. Verify taper fully seated. Install the Cutting Tool: Insert ER11 collet and tool, thread nut by hand, tighten with ER11A spanner. Program and Machine: Set spindle speed? 5000 RPM. Program appropriate feeds and depths. Use coolant as recommended. After Operation: Stop spindle, retract tool, remove angle head, clean taper, apply rust preventive oil. Remove tool and store separately. ITEM INCLUDED (057287). AG90-BT40-ER11-80-70 Angle Head Main Unit 1. ER11A Collet Spanner Wrench 1. 17mm Open-End Wrench 1. Mounting Support Block 1. BT40 Pull Stud 1. You can make order with no worry. Any concern just feel free to let us know, we’ll reply in 24h. Orders processed Mon-Fri; not on weekends/public holidays. We will work with you to resolve quickly. Items must be new, unused, with all original materials. Defective & Damaged Products: Send pictures/videos for faster resolution. Contact within 7 days of receiving damaged item. ECheck Issues: Payments via eCheck do not clear immediately.

In used condition but overall great! Has been lightly cleaned. No bolts – mount only. Please reference pics for exact details and condition. Thank you for looking and happy shopping!

Title: Vintage Ralmike’s Tool-A-Rama Automatic Boring & Facing Head Kit. Spindle Taper Style: Standard Integrated R8 Taper (Bridgeport Direct Fit). Up for sale is a rare, premium vintage manual machining Automatic Boring and Facing Head kit distributed by the iconic Ralmike’s Tool-A-Rama (Summit, New Jersey). Unlike common static boring heads that require you to stop the mill spindle to make diameter changes, this high-end French-made Gamet head features a fully functional mechanical clicker ring for automatic radial self-feed facing operations! Perfect for machining flat-bottomed counterbores, facing blind flanges, or cutting internal snap-ring grooves perfectly square under power feed. Kit Features & Specifications. Boring Head: Genuine Gamet (France) head dual-marked with the CTR stamp and Ralmike’s branding. Automatic Self-Feed Mechanism: Integrated knurled outer collar allows mechanical cross-feed progression while the spindle is rotating. Taper Shank: Heavy-duty, integrated solid R8 taper shank-mounts directly into standard Bridgeport knee vertical milling machine spindles. Boring Extensions: Includes an indexable tool bit holder, and an “S” stamped heavy rigidity steel boring bar. Ralmike’s Summit, NJ boring bars as pictured. Storage: Housed in its original finger-jointed wooden storage box. Pre-owned vintage toolroom equipment. The critical dovetail ways and slide paths are in great condition and move smoothly. The micro-adjustable radial metric dial screw (0-5 divisions) turns correctly, and the automatic feed ring turns crisp and free. No heavy corrosion, abuse, or tool crashes-just light cosmetic patina from a clean, historical machine shop environment. (Please review photos for exact inventory and condition details). Securely packaged and heavily padded to ensure the precision ground R8 taper, metric dial carriage, and wood casing are fully protected during transit. Being offered as-is/Found, please ask questions beforehand. All sales are final!

WE CAN DO A VFD IF YOU NEED SINGLE PHASE AT COST.