Grinding Disc Crusher Grinding machine. The small disc mill crusher is a piece of high-efficiency equipment specifically designed for grinding and crushing ore materials. By means of its compact structure, flexible operation and stable performance, it is widely used in the scenarios such as laboratory sample preparation, small-scale mining processing and building material testing. It can precisely crush various kinds of ore (such as iron ore, limestone and granite) to meet material processing requirements with different fineness demands. Material of grinding disc: Manganese steel Voltage: 220V 50/60Hz 1PH Motor power: 1500W Driving mode: Belt driving (including a belt cover) Finished product collecting mode: Bottom collecting box Grinding fineness adjusting mode: Use the handwheels to adjust the gap between the grinding discs. Is integrally made of cast iron, stably supports the whole machine, ensures there is no obvious shake during operation and guarantees the grinding precision. Manganese steel grinding disc assembly. Comprises upper and lower manganese steel grinding discs rotating relatively, and is a core part for material crushing. The manganese steel material improves the grinding efficiency and wear resistance. Is composed of a 1.5KW 220V motor, belt pulley and driving belt. After the motor runs, the grinding discs are driven by the belt to rotate so as to grind the material. The belt cover is arranged outside the driving system to avoid the phenomenon that the belt is exposed to cause potential safety hazards. Is composed of an adjusting handwheel, adjusting screw rod and other components. The handwheel can be rotated to drive the screw rod to adjust the gap between the grinding discs, and then the material crushing fineness can be controlled. Is located on the top of the machine. The funnel design is adopted, facilitating material feeding. Meanwhile, the feeding speed can be controlled to avoid the phenomenon that due to too fast feeding, the machine is overloaded. Finished product collecting box. Is installed at the bottom of the machine and abuts against the discharging outlet below the grinding discs. The crushed material automatically falls into the collecting box. The collecting box adopts the pull-out or flip type design, so it is conveniently taken out and cleaned. Installation of collecting box. Operator requirements: Operators must be familiar with the contents of this manual and master the equipment operation methods and safety precautions before they can start working. Non-professionals are strictly prohibited from operating the equipment without authorization, and children are prohibited from touching and operating the machine. Power safety: The equipment must use the 220V single-phase AC power supply that meets the requirements, and the leakage protection device must be installed. It is strictly prohibited to operate the power switch with wet hands to avoid electric shock accidents. When the device is running, it is forbidden to plug or unplug the device. Protective measures: When the equipment operates, the belt cover must be installed in place, and it is strictly prohibited to start the equipment under the condition that the belt cover is not installed or is damaged. It is strictly prohibited to stretch hands or other objects into the feeding inlet, the gap between the grinding discs, and belt driving part to prevent the personal injury. During operation, wear a protective face mask to prevent splashing. Material safety: It is strictly prohibited to feed the too hard materials such as metal blocks and stones, or flammable, explosive or corrosive materials to avoid damaging the equipment or causing safety accidents. The material should be fed slowly and evenly to avoid material blockage in the feeding inlet. After the equipment is completely stopped, the fault should be checked and dealt with. The equipment must not be restarted before the fault is not solved. Equipment placement: The equipment should be placed on a flat and solid ground to avoid tilting and prevent the equipment from falling down during operation. The adequate space should be reserved around the equipment (it is recommended that the space should be no less than 0.5m) for convenient operation, maintenance and heat dissipation. Item included:Grinding Disc Crusher Grinding machine 1 Item Number: 134181. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Hope for your understanding. Please contact with us at first for more details. Defective & Damaged Products. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear.

This item is fully tested and in excellent working order. Cosmetically in good condition showing minor scuffs / scratches / blemishes from previous use. The power cable has insulation visible near the switch (no bare wire visible). Includes Laboratory Jar Mill as pictured. No additional items or accessories are included. Photos are of the actual unit for sale. Please feel free to message us with any questions you may have. This listing includes only what is pictured or described. Many of our items take a standard PC style power cable (NEMA 5-15P to IEC-320-C13) which unless pictured is not included. We can include one if requested at the time of checkout free of charge. If a custom power cord or AC adapter is required for the item, it is only included if pictured or described above. All items are carefully packed with brand new packaging materials to ensure your item arrives on time and without damage. Doing so is against US and international law.

Small Ceramic Grinding Machine Ceramic Ball Mill 220V. The pot mill ball mill, also known as the rolling jar machine, is a precision grinding and mixing device for laboratories and small-scale production. The machine is beautiful and novel, and has a compact structure, convenient operation, high working efficiency and uniform fine grinding particle size. It is the preferred choice for scientific research, teaching, experimentation and production. It is widely used in the industries of biomedicine, ceramic glaze slurry, metal powder, non-metallic minerals, new materials and so on. 23.634.622.6 inches (608857.5cm). Rev of the Rollers. About 59kg (130.1LBS). Used for ball grinding of glaze or other raw materials, and used for dry or wet grinding. More suitable for dry grinding. L ceramic milling jar1 (including a cover and ball milling beads). Read the operating instructions carefully before use. Always keep children away from the machine, PROHIBIT children from operating the machine. Never touch the RUNNNING Parts or insert hardware into the machine. Do not put hands into the machine during operation. Always unplug the machine when assembling or disassembling the unit. Protective devices must not be made unserviceably or be removed. Grinding jars may be very hot after grinding. Wet grinding may cause high pressure in the grinding jar–Danger of squirting! When oxidable materials, such as metals, organic materials, wood, coal and plastic, are ground or sieved, the risk of spontaneous ignition (dust explosion) exists whenever the fine particles exceed a specific percentage. While these materials are being ground, it is necessary to take special safety precautions e. Wet grinding and the work must be supervised by a specialist. The instrument is not explosion-proof and is unsuitable to grind or sieve materials which are explosive or combustible or promote combustion. Do not allow the instrument to run in an unsupervised state. Due to the vibrations, under certain operating conditions, the machine may creep along the surface on which it is located or mounted. The wear-resistant rubber rollers are used so that the service life of the machine can be prolonged. The rubber rollers are not prone to hardening and aging after long-term use, have good resilience performance and can adapt to different working environments. The 220V 550W high-quality motor adopts metal gears and is durable, motor transmission adopts variable-speed transmission of a belt and a pulley, and the equipment noise is low. The driving force is stable and consistent to ensure smooth operation. The control switch is simple in structure and easy and convenient to operate, well achieving stable starting, greatly reducing the mechanical shock stress, prolonging the service life, reducing the vibration of the whole machine and effectively protecting the machine. Machine is equipped with a 10L ceramic jar, the triangular buckle sealing design is adopted in the tank opening. The ball milling tank is suitable for dry grinding and wet grinding according to different raw materials. Machine is equipped with alumina ceramic milling balls with different sizes. The milling balls have high adaptability and practicability and can be selected as required. The milling efficiency and quality can be greatly improved. High-quality bearings are adopted to ensure smooth running of the rollers, and can be freely adjusted to adapt to different ball milling jars. Bearing wheel lubricating oil needs to be regularly added in the using process according to the frequency of use. Put the materials and grinding balls into the grinding jar. Cover the jar with the lid. Place the jar in the center of the machine. Turn on the switch and start grinding. Item Number (134183): 1 x Ceramic Ball Mill 220V. Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Hope for your understanding. Please contact with us at first for more details. Defective & Damaged Products. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it’s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear.