This came with the large amount of Sherline lathes, mills and accessories I bought. This setup is the correct size to be used on a desktop milling machine see no part numbers and is not listed in Sherline catalog. Lots of other accessories are listed.

This came with the large amount of Sherline lathes, mills and accessories I bought. This setup is the correct size to be used on a desktop milling machine see no part numbers and is not listed in Sherline catalog. Lots of other accessories are listed.

Roland JWX-10 Desktop CNC Milling Machine Engraver Wax Mold Maker. Measurements: Item weighs over 150 pounds- my scale would weigh over that. Condition: Used in working order. See ALL photos for Quality and Condition. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jjc130fe” and is located in this country: US. This item can be shipped to United States.

• Brand: Roland
• Control: CNC
• Machine Type: Milling Machine
• Model: Roland JWX-10 Desktop CNC Milling

Roland JWX-10 Desktop CNC Milling Machine Engraver Wax Mold Maker. Measurements: Item weighs over 150 pounds- my scale would weigh over that. Condition: Used in working order. See ALL photos for Quality and Condition. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jjc130fe” and is located in this country: US. This item can be shipped to United States.

• Brand: Roland
• Control: CNC
• Machine Type: Milling Machine
• Model: Roland JWX-10 Desktop CNC Milling

Financing Available at Low Rates. New & Used CNC Machines. CNC LATHE / TURNING CENTERS. HAAS VM-3 DIE MOLD VERTICAL MACHINING CENTER. We are a stocking dealer of New & Used Machine Tools located in Southern California & are members of the MDNA. We have thousands of different Manual, CNC Machines and Tooling in stock for both fabrication & metal cutting. All specifications are approximations, and are subject to verification. Haas CNC Control with 15 Color LCD. 24 + 1 Automatic Side Mount tool changer. MPG Control with Display. Wireless Probing system Ready. Power Failure Detection Module. Brush-type servo drive motors on all axis. Rapid Traverse Rates: 710 Inch Per Minute. Cutting Feed Rates: 500 Inch Per Minute. Spindle Nose to Table Min. Die Mold Jig Table. Max Weight on Table: 4000 lbs. Speed Range: 12,000 RPM. Spindle Power: 30 HP. Capacity: 24 Side Mount. Max Tool Weight: 12 lbs. Max Tool Dia: 5. Max Tool Length: 13. Tool Changing Time: 2.6 Seconds. Air Required: 100 psi, 4 scfm. Power: 220v / 66FLA / 3-Phase. Overall Dimensions: 125″ x 93″ x 102 High. No Charges for loading at list Price. Comes as shown in pictures. MachineStation is a full service CNC Machinery Dealership located in Chino, California, USA. Talk to one of our Machinery experts to get a price quote and more information. We pay cash for your used CNC machinery and Equipment. We are looking forward to being of service to you and your esteemed Organization. Leasing/Loan can be arranged through our financing partners & Banks. For Transportation of the CNC Machinery and Heavy Equipment Flat Bed Service. We load all the machines free of charge from our Warehouses. We can setup LTL or Dedicated trucking loads for at the most competitive prices. We load onto flatbed air ride trucks free of charge at our location. We crate or containerize your machine according to your requirement for Exports. This service is extra depending on the size of Equipment or the number of machines loaded into the container. MachineStation Usa is a global trading company located in California, USA. Used Machine Dealer focused in All Kinds of CNC & Manual Metalworking machines. The item “HAAS VM-3 VERTICAL MACHINING CENTER 12000 RPM DIE MOLD MAKER CNC MILL VF VM” is in sale since Tuesday, June 23, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machinestationusa” and is located in Chino, California. This item can be shipped to United States.

• Model: VF-8
• Spindle Horsepower: 30 hp
• Country/Region of Manufacture: United States
• Machine Type: Machining Center
• Table Length: 40 in – 59.9 in
• Max Spindle Speed (RPM): 10001 – 15000
• Model Year: 2008
• X-Axis Travel Bed: 41 in – 60 in
• Y-Axis Travel Bed: 21 in – 25 in
• Spindle Taper: CAT 40
• Function: Milling
• Brand: Haas
• Control: CNC

Haas VM-3 VMC 2013 – Mold Maker VF-3, Side Mount ATC, 30 HP. We are pleased to offer the following for your consideration. X Axis Travel: 40. Y Axis Travel: 26. Z Axis Travel: 25. Table Size: 54″ x 25″. Table Capacity: 4,000 lbs. Spindle Taper: Cat 40. Spindle Speed: 12,000 RPM. Spindle Motor: 30 HP. Rapid Traverse Rate: 710 IPM. Maximum Cutting Feed Rate: 500 IPM. Auto Tool Changer: 24 Tools. Approx Machine Weight: 14,000 lbs. Approx Dimensions (l x w x h): 153″ x 138″ x 118. 24 Tool Side Mount Changer. 30 HP Inline Direct Drive Spindle. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “Haas VM-3 VMC 2013 Mold Maker VF-3, Side Mount ATC, 30 HP” is in sale since Monday, September 14, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Algonac, Michigan. This item can be shipped to United States.

• Brand: Haas

Up for your consideration is a used Burke Machine Tool Co. This machine has been tested and is in working order. It is single phase, 115/230V. The table dimensions are 16″ x 3-3/4″ and it has a t-slot. It has power feed, right and left, and has an automatic shut off. There is a gear change box for the table feed. The table can also be adjusted to move diagonally. There is a horizontal drawbar and a vertical drawbar, and the vertical drawbar accepts 3C collets. There are a few included accessories, such as spanner wrenches, a small vise, and a single 3/8 collet for the vertical spindle. The collet body is 5/8″ diameter and has an overall length of 2-11/16″. The one motor that has a legible tag on it, which powers the vertical spindle, is 3/4HP. The machine base is hollow and has a door, which can be used as an additional storage area. The footprint of the base is 21″ x 21″ and the overall dimensions of the machine are approximately 25″ (W) x 43″ (D) x 59 (H). The table has an area towards the center where it was milled/cut into and the spanner wrench holes on the end of the vertical spindle are deformed from use, but still. The knurled handle on the end of the vertical drawbar has some dents and gouges in it where it looks like someone was using a wrench on it. One of the pulleys, for the vertical spindle, also has two chipped areas. Look closely at the pictures to get a better idea of condition. I prefer this item to be picked up and I will load on your truck for free. Give them the weight (655 lbs), dimensions (48″ L x 40″ W x 65 H), and my zip code 62966, and let them know that we are a business with a loading dock and forklift. You can then contact Freightquote with the final weights and dimensions to have it picked up, which is usually within a day or two. Please ask any questions you might have and I will get right back to you. The item “Burke Horizontal Vertical Milling Machine 3-3/4 x 16 Table 1 Phase Model Maker” is in sale since Tuesday, May 12, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “flatlandforge” and is located in De Soto, Illinois. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Machine Type: Vertical Milling Machine
• Table Length: 16″
• Power Source: Electric
• Brand: Burke
• Table Width: 3-3/4″
• Voltage: 115 V

Up for your consideration is a used Burke Machine Tool Co. This machine has been tested and is in working order. It is single phase, 115/230V. The table dimensions are 16″ x 3-3/4″ and it has a t-slot. It has power feed, right and left, and has an automatic shut off. There is a gear change box for the table feed. The table can also be adjusted to move diagonally. There is a horizontal drawbar and a vertical drawbar, and the vertical drawbar accepts 3C collets. There are a few included accessories, such as spanner wrenches, a small vise, and a single 3/8 collet for the vertical spindle. The collet body is 5/8″ diameter and has an overall length of 2-11/16″. The one motor that has a legible tag on it, which powers the vertical spindle, is 3/4HP. The machine base is hollow and has a door, which can be used as an additional storage area. The footprint of the base is 21″ x 21″ and the overall dimensions of the machine are approximately 25″ (W) x 43″ (D) x 59 (H). The table has an area towards the center where it was milled/cut into and the spanner wrench holes on the end of the vertical spindle are deformed from use, but still. The knurled handle on the end of the vertical drawbar has some dents and gouges in it where it looks like someone was using a wrench on it. One of the pulleys, for the vertical spindle, also has two chipped areas. Look closely at the pictures to get a better idea of condition. I prefer this item to be picked up and I will load on your truck for free. Give them the weight (655 lbs), dimensions (48″ L x 40″ W x 65 H), and my zip code 62966, and let them know that we are a business with a loading dock and forklift. You can then contact Freightquote with the final weights and dimensions to have it picked up, which is usually within a day or two. Please ask any questions you might have and I will get right back to you. The item “Burke Horizontal Vertical Milling Machine 3-3/4 x 16 Table 1 Phase Model Maker” is in sale since Tuesday, January 21, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “flatlandforge” and is located in De Soto, Illinois. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Machine Type: Vertical Milling Machine
• Table Length: 16″
• Power Source: Electric
• Brand: Burke
• Table Width: 3-3/4″
• Voltage: 115 V