We will NO LONGER honor the price per qty. The listings with the (price per qty) is the new price listed per QTY. The listings with the (price per qty) is the new listed per QTY. Maxi Torque Air Power Draw Bar for ACER Milling Machines (R8). Please specify what drawbar you need. DB285 Cat 40 Draw bar total length- 24-7/8″ Draw bar length- 20-1/16″ (tip to shoulder) DB274 NT40 Draw bar total length- 24″ Draw bar length- 20-1/4″ (tip to shoulder) DB273 R8 Draw bar total length- 24-5/8″ Draw bar length- 19″ (tip to shoulder) DB294 NT30 Draw bar total length- 25-3/8″ Draw bar length- 20-1/2″ (tip to shoulder) Other sizes available. Fullerton Office 2320 E Valencia Dr Fullerton, CA 92831. Piscataway Office 244 N. Randolphville Road Piscataway, NJ 08854. 2320 E Valencia Dr Fullerton, CA 92831. Note: Weight restrictions may apply in some cases. Orders under 150 lbs. Orders above 150 lbs. We guarantee the items are exactly as said in description. Thank you for viewing. Supra Machine Tool appreciates your business very much. Supra Machine Tool E-bay Store. For a wide selection of parts for milling machine, machining center, surface grinder, and engine lathes. The free listing tool.

X-Axis Power Feed 450 Lbs Torque For Bridgeport Type Milling Machines. Name: X-Axis Power Milling Machine, 450 LB Torque, Power Feed Table Mill, 110V, 0-200PRM Adjustable Rotate Speed for Bridgeport and Similar Knee Type Milling Machines. Size: 7inch x 4.5inch x 11.5inch. Power Parameters: 90 Watts. Input Voltage: 110V 50/60hz, Single Phase. Rotation Speed: 0-200 RPM. Maximum Feed Speed: 650mm/Min. Maximum Return Speed: 850mm/Min. Application: for Bridgeport and Similar Knee Type Milling Machines. X-Axis power feed is made of aluminum; Power Parameter: 95Watt, 110V input voltage, 50/60Hz, single phase;Rotate Speed:0-200 RPM. Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min. Automatic And Manual Control. You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work. And this multifunctional milling machine power feed can work with excellent speed control in the entire range according to your needs. Stable And Efficient. This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio, low transmission noise, high transmission efficiency and high bearing capacity. And when fast transmission, if the tool collides with the work piece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage. Portable And Easy To Install. This power feed for milling machine is compact and portable. Weight: 5kg/11lbs, Size: 74.511.5 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself. This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Webb, etc. This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft on the end, But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines, so please make sure yours is the typical Bridgeport type as mentioned above. X-Axis Power Milling Machine x 1. We accept Payoneer only. The parcel maybe delay 1-2day of the weekend. Due to the bad weather, Holidays, Hot Season ect. The parcel maybe delay, If you have any problems, mssage us, we will try our best to solve it. We cannot deliver your order if your state is PR. Message us for return instructions. If you are not satisfied with the item for any reason, please do not quick to leave negative/neutral feedback even open request and case without any communication with us. We devote ourselves making EVERY CUSTOMER in 100% Satisfactory and resolve any problem.

With all of its amazing features, this mill / drill is in a class of its own. If you are looking for a highly sophisticated combination milling drilling machine with all the bells and whistles, look no further than the G0935 1-1/2 HP Mill/Drill. This machining center incorporates high-level features such as a 3-axis digital DRO, Z-axis spindle DRO, a variable-speed X-axis power feed, and a powered head for quickly setting the desired Z-height. Electronic variable speed (EVS) allows for on-the-fly speed adjustments-no need for belt changes. This Mill/Drill is also equipped with a variable-speed 1-1/2 HP hi-torque motor with a digital RPM readout, an R-8 spindle, and a fine feed depth control. The G0935 features a spindle-depth DRO for accurate and repeatable cuts. The 7″ x 29″ milling table allows ample room for projects of all sizes, while a 1-1/8 drilling capacity provides stout cutting capability. Made in an ISO 9001 factory. Motor: 1-1/2 HP, 110V, single-phase, 12A. Distance spindle to column: 9-1/16. Distance spindle to table: 12-5/8. Drilling capacity: 1- 1/8. Table size: 29-1/8″ x 7-1/16″. End milling capacity: 3/4. Face milling capacity: 1-15/16. Footprint: 20-1/2″ x 11-1/2″. Overall dimensions: 37-1/2″ W x 32″ D x 36 H. 3-Axis DRO with quill DRO and 0.001 resolution. Variable-speed spindle with digital RPM display. Variable-speed X-axis power feed table. 3 Spindle stroke with fine downfeed. 1-16mm JT6 drill chuck. Cabinet stand with built-in storage.

Power Feed X-Axis 450 Lbs Torque For Bridgeport Type Milling Machines 0-200 RPM. Rotate Speed: 0-200 RPM. Max Torque: 450 in-lb. Max Feed Rate: 650 mm/min. Max Return Speed: 850 mm/min. X-Axis power feed is made of aluminuml;Power Parameter:90Watt, 110V input voltage, 50/60Hz, single phase;Rotate Speed:0-200 RPM. Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min. This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc. AUTOMATIC AND MANUAL CONTROL? You have the option to operate this power feed in automatic mode at a constant speed, allowing you to work hands-free. Alternatively, you can manually adjust the speed control knob for more precise milling work. This versatile power feed provides excellent speed control throughout the entire range to meet your specific needs. Equipped with the Gleason Spiral Bevel Gear, this power feed ensures stable transmission ratio, minimal transmission noise, high efficiency, and superior bearing capacity. Additionally, it features a special safety device that protects the transmission plastic gear and electronic parts from damage in case of tool collision or instantaneous reversal during fast transmission. PORTABLE AND EASY TO INSTALL? Compact and portable, this milling machine power feed weighs only 3.75kg/8.27lbs and measures 73.512.8 inches in size. Whether you are a novice or a skilled operator, installing this power feed is a breeze. Just follow the instructions and online video or install it on your own. Designed to fit milling machines such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, and more, this power feed is versatile. It specifically fits vertical knee-type mills with the same mounting pattern and a 5/8 diameter shaft on the end. However, please note that it will not fit mills with a different mounting pattern or different sized leadscrews, such as Powermatic and some other irregularly sized machines. Therefore, please ensure that your machine follows the typical Bridgeport type mentioned above. We accept Payoneer only. The parcel maybe delay 1-2day of the weekend. Due to the bad weather, Holidays, Hot Season ect. The parcel maybe delay, If you have any problems, mssage us, we will try our best to solve it. We cannot deliver your order if your state is PR. Message us for return instructions. If you are not satisfied with the item for any reason, please do not quick to leave negative/neutral feedback even open request and case without any communication with us. We devote ourselves making EVERY CUSTOMER in 100% Satisfactory and resolve any problem.

STANDARD SCREW NO POWER FEED OR WITH “SERVO TYPE” POWER FEED. SEE THE OTHER QUALITY BRIDGEPORT PRODUCTS IN OUR STORE INCLUDING. REPAIR KITS, REPLACEMENT PULLEYS, BELTS AND CLOCK SPRINGS. All items are described as accurately and honestly as possible. Photos shown are of the actual item or representative images unless otherwise stated. We disclaim any liability for incidental or consequential damages related to use of the item. We reserve the right to update or modify these Terms at any time.

The Bridgeport 6F Power Feed Complete Kit is a manual control system designed for milling machines. This electric-powered power feed is specifically for the Bridgeport 6F model, providing precision and efficiency in metalworking operations. This kit is ideal for those looking to repair or upgrade their milling machine with original Bridgeport parts, ensuring quality and compatibility with the machine.

This Sale Is For One (1). Pre Owned OKUMA DC Power Supply DC-S1A For 4 AXES DC Power Supply DC-S1A. Recently Removed From A Working Industrial Environment.

VEVOR Milling Machine Power Feed. Our power table feed brings a stable transmission ratio and high load-bearing capabilities. Take control of speed with ease using the manual lever and automatic knob. Ideal for 5/8” end shaft diameter machines and X-axis milling machines. Experience efficiency and reliability like never before! Equipped with Gleason spiral bevel gears, our milling machine power feed ensures a stable transmission ratio, low noise output, high transmission efficiency, and excellent load-bearing capacity. With noise levels? 85dB, providing a conducive environment for your work or study without disruptions. Our power feed table mill is equipped with overload protection. In instances of rapid transmission, if there is a collision or instantaneous reversal between the tool and the workpiece, a special security mechanism safeguards the gearbox’s plastic gears and electronic components from damage. Our compact and lightweight power table feed is easy to install and operate. The control panel features clear functions, making the operation straightforward. Additionally, we provide a detailed installation and user manual, ensuring you have all the information you need to operate effectively. Our power feed milling machine comes with a set of sturdy metal parts that are built to last, including 1 x copper gear, 1 x install the retainer plate, 3 x fixing screws, 2 x limit switch springs, 15 x adjusting shims, 1 x bearing inner ring, and 1 x copper gear gasket. Ultimate High-Compatibility Solution: Our power feed table mill Includes everything needed to mount on most knee-type mills with a 5/8” end shaft diameter that shares the same installation pattern, such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, and others. Infinitely Variable Speed Control: With the continuously variable speed knob, you can adjust the speed according to your needs. Our milling machine power feed offers a rated torque of 150 in-lb(16.9 NM), a maximum speed of 200 RPM, a maximum feed rate of 965 mm/min, and a maximum return speed of 1385 mm/min. Highly Stable and Efficient: Featuring Gleason spiral bevel gears, our power table feed boasts stable transmission ratios, low noise, high transmission efficiency, and high load-bearing capacity. Plus, it comes with a special security device that protects the gearbox plastic gears, and electronic components from damage in the event of tool collision or sudden reversal during rapid transmission. Easy to Use, Manual or Automatic: Our power feed milling machine offers two different speed adjustment modes: manual and automatic. With manual control buttons, you can adjust the speed as needed. Alternatively, set the device to automatic constant speed mode for hands-free operation, making your milling tasks a breeze. Designed for X-axis Direction: This power feed woodworking enables smooth movement in the X-axis direction. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Please be aware that. Please DO NOT fill in the PO Box address. California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. Georgia Warehouse: Austell, GA. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault.

Pay attention to the selection of product specifications If you need other specifications, please contact customer service first.

The Bridgeport BP 11630417 Power Feed Velocity Controller is a precision machining equipment designed for metalworking applications. Made by the reputable brand Bridgeport, this controller offers precise control over the speed of the power feed on machining centers and milling machines. While the product has not been tested, it is expected to perform efficiently and reliably in a professional setting.