CNC MICRO MILL – Work in progress 90 percent ready. This machine represent the work of a professional lab next door. Their work was interrupted due to a terrible accident. This machine is almost ready what is missing is only a stepper motor and need some work to connect the main parts. X axis (the upper slide) – approx. Y axis – approx. The upper ring carrying the spindle is able to host a 65mm diameter CNC Spindle(not included). Z axis – 4 travel. WORKING HEIGHT CAPABILITY – This machine due to a pair of plates has the vertical extension capability up to more than 22 inch from the level of working plate – Very rare and expensive feature. Note about the extension capabilities. X axis cannot be easy extended due to the mill geometry. Y axis can be relative easy extended just replacing the y slide with a longer one and replacing the working plate also with a longer one. Observation: The working plate and Y axis need to be bolted in their place. Also machine will need its electronic command which is not included. Accounting – The initial price of all materials and parts was TWO – THREE TIMES BIGGER THAN OUR ASKING PRICE. All this assembly exceed 100 pounds and was too expensive to send it by track. The item is for sale AS WAS SHOWN.

Sherline CNC Ready Accessories.

Please Note: this listing and machine were were updated to not include the headstock/motor/ER spindle/Stepper/Collet Wrench set/ELS Powerfeed Leadscrew and controller as previously described. See my other listings for these components. The headstock and motor drive assembly only takes a minute to change over with Sherline’s keyed quick change system. Again, no headstock, spindle, or drive motor are included. Includes the lathe base/bed/Crosslide/Tailstock/new leadscrews and nuts/deluxe zero adjustable handwheels. This is a very economical way to add long-bed zero-adjustable handwheel larger lathe capabilities to your existing inch/metric 2000 5400 5410 5800 mill or 8 4000 4010 4410 WW watchmaker lathe. This Sherline 4400 Inch 17 Lathe Mill w as a v. Ery clean low use CNC unit that has been refurbished and converted to manual control zero-adjustable handwheels with new leadscrew/parts and cross slide table/screw/nuts. Works smoothly and tightly as a new lathe – no observable backlash, play, or leadscrew wear. Only mod observed was the tailstock handwheel had the handle removed – new handle/hardware is inly a couple of dollars from Sherline, but isn’t necessary for use. All moving parts are greased, bed has way oil, very minor oxidation on bed as pictured doesn’t affect function at all. Package is large and heavy with the long bed.

Vertical CNC Milling Machine Center. Model: VF-0E Year: 2000. Good working condition and available to view under power. Made entirely in The U. 30″ x 16″ Travels. 20HP Vector Dual Drive. User Friendly Haas Control. Heavy-Duty Sheet metal Enclosure. ISO Standard G-Code Programming. One Button Tool Offset Measurement. Double Anchored Ballscrews for 100% Parallelism. Spindle Nose to Table (min). Spindle Nose to Table (max). Number of Std T-Slots. Max Weight on Table. Direct Speed Belt Drive. Max Torque w/opt Gearbox. Rapids on X / Y. Max Tool Diameter (full). 113 L/min, 6.9 bar. Power (options may increase requirement). 195-260 VAC/50 A 354-488 VAC/30 A. Specifications subject to verification. Items over 1000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. This is usually the case with top-heavy items, such as grinding machines. We accept all major credit cards except American Express. Orders are not processed until they’re paid in full.

Maxnc 10 CNC Ready Mini Mill Milling Machine With 4th Axis and Power Supply.

Installed new in………………………………………………………………. Motion hours………………….. 3,334. Spindle hours…………………… P-Cool…………………….. 40 Taper 8100 RPM Inline Spindle………….. Fourth Axis Ready. 20 Pocket Umbrella Tool Changer………….. Rigid Tap……………………. High Intensity Lighting………………. Option on. Chip Auger.. Please note: All of our machines will have completed a full maintenance program and any. Repairs needed will be taken care of prior to leaving our facility. Including alignment and positioning /accuracy. Point is loaded onto customer’s truck in Woodstock, IL. For more information please call Rich at.

HAAS VF-1 CNC VERTICAL MILL. 20″ X 16″ Y 20 Z TRAVELS. 7,500 RPM CAT 40. MACHINE IS UNDER POWER AND AVAILABLE FOR INSPECTION. MACHINE IS IN EXCELLENT CONDITION MECHANICALLY AND COSMETICALLY. ALL AXES AND SPINDLE ARE SMOOTH AND QUIET. MACHINE LOCATED AT OUR SHOP IN OXNARD, CA 93036. SEARCH SMS ENGINEERING (8O5)44373OO.

This Haas VF2SS milling machine has been expertly cared for and maintained, showcasing a near-new appearance that reflects the utmost attention to detail. Machine has been kept in working condition and used primarily for machining aluminum. Everything works properly and smoothly. The motor runs without any hiccups and the spindle sounds perfect. Functions on 220-260v 3-phase only with an 80-amp breaker. X Axis Travel: 30. Y Axis Travel: 16. Z Axis Travel: 20. Rapid Rate X Axis: 1,400 IPM. Rapid Rate Y Axis: 1,400 IPM. Rapid Rate Z Axis: 1,400 IPM. Table Size: 36″ x 18″. Max Table Load: 1,500 LBS. Spindle Motor: 30 HP. Spindle Speed: 12,000 RPM. Spindle Taper: 40 BT. Tool Changer: 24 ATC. Max Cutting 833 ipm. Max Weight 1500 lb. Max Thrust X 1995 lbf. Max Thrust Y 1995 lbf. Max Thrust Z 3085 lbf. Chip-to-Chip 3.6 s. Coolant Cap 55 gal. Amps 3 Phase 35A (High). Dimensions: 106″ x 101″ x 101. Weight: 7,800 LBS.

Northern Machine Tool Services, Inc. Installed new in………………………………………………………………. Motion hours………………….. 3,334. Spindle hours…………………… P-Cool…………………….. 40 Taper 8100 RPM Inline Spindle………….. Fourth Axis Ready. 20 Pocket Umbrella Tool Changer………….. Rigid Tap……………………. High Intensity Lighting………………. Option on. Chip Auger.. Please note: All of our machines will have completed a full maintenance program and any. Repairs needed will be taken care of prior to leaving our facility. Including alignment and positioning /accuracy. Point is loaded onto customer’s truck in Woodstock, IL. For more information please call Rich at.

HAAS VF-4 CNC VERTICAL MACHINING CENTER – 4TH AXIS READY CNC MILL. 1996 Haas VF4 CNC Machining Center. Table Load: 3,500 lbs. Spindle Nose to Table Top: 4? X Axis Travel: 50? Y Axis Travel: 20? Z Axis Travel: 25? Spindle Taper: CAT 40. Spindle Motor: 15 HP. Tool Changer Capacity: 20 Station. Tool Weight: 12 lbs. Weight: 15,000 lbs. We can load this machine onto your truck. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “apexmachinesolutions” and is located in this country: US. This item can be shipped to United States.

• Spindle Horsepower: 15 hp
• Machine Type: Machining Center
• Power Source: Electric
• Table Length: 52 in
• Spindle Taper: CAT 40
• Z-Axis Travel Bed: 25 in
• Table Width: 19.5 in
• Brand: Haas
• X-Axis Travel Bed: 50 in
• Function: Milling
• Model Year: 1996
• Control: CNC
• Max Spindle Speed (RPM): 7501 – 10000
• Voltage: 480 V
• Model: HAAS VF-4
• Y-Axis Travel Bed: 20 in
• Country/Region of Manufacture: United States