IF FOR ANY REASON ONE OF THESE SHOULD BE DAMAGED UNDER NORMAL USE, I WILL REPLACE IT FREE FOR YOUR LIFETIME. I TAKE CARE OF MY CUSTOMERS FIRST. A set of (two) vise stops made from aluminum 6061 and fitted with stainless hardware. My job is to please my customers. All vise stops are inspected and tested for use. Stops will adjust to any standard vise jaw up to 1 inch thick. The picures show a 6 inch Kurt and a 4 inch Kurt. And keep us in mind in the future. Please check out our other tools (in the last picture) including brass and aluminum clamps with stainless hardware. The item “SET OF 2 MACHINE SHOP VISE STOPS FOR CNC OR MANUAL MILL VISE WORK OR HOBBY” is in sale since Saturday, December 31, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Workholding\Vises”. The seller is “kirk4898″ and is located in Tijeras, New Mexico. This item can be shipped worldwide.

• Model: 101
• Country of Manufacture: United States
• WRENCH INCLUDED: 6061 ALUMINUM

IF FOR ANY REASON ONE OF THESE SHOULD BE DAMAGED UNDER NORMAL USE, I WILL REPLACE IT FREE FOR YOUR LIFETIME. I TAKE CARE OF MY CUSTOMERS FIRST. A set of (two) vise stops made from aluminum 6061 and fitted with stainless hardware. My job is to please my customers. All vise stops are inspected and tested for use. Stops will adjust to any standard vise jaw up to 1 inch thick. The picures show a 6 inch Kurt and a 4 inch Kurt. And keep us in mind in the future. Please check out our other tools (in the last picture) including brass and aluminum clamps with stainless hardware. The item “SET OF 2 MACHINE SHOP VISE STOPS FOR CNC OR MANUAL MILL VISE WORK OR HOBBY” is in sale since Saturday, December 31, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Workholding\Vises”. The seller is “kirk4898″ and is located in Tijeras, New Mexico. This item can be shipped worldwide.

• Model: 101
• Country of Manufacture: United States
• WRENCH INCLUDED: 6061 ALUMINUM

IF FOR ANY REASON THESE STOPS ARE DAMAGED UNDER NORMAL USE. JUST SEND THEM BACK AND I’LL TAKE CARE OF YOU. This stop can be used from the left or right hand side. The pins are both set BELOW the vise jaw. This lets you machine the edge of any part right down to the jaw. These are very useful in any kind of set up where you do not want to hit the stop itself with your tool. All vise stops are inspected and tested for use. Stops will adjust to any standard vise jaw up to 1.05 inch thick. The picures show a 6 inch Kurt and a 4 inch Kurt. And keep us in mind in the future. Please check out our other tools (in the last picture) including brass tools and aluminum clamps with stainless hardware. The item “SET OF 2 MACHINIST TOOL VISE STOPS FOR CNC OR MANUAL MILL VISE LOW PROFILE” is in sale since Friday, February 03, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Workholding\Vises”. The seller is “kirk4898″ and is located in Tijeras, New Mexico. This item can be shipped worldwide.

• Country/Region of Manufacture: United States
• Model: 106
• Country of Manufacture: United States
• WRENCH INCLUDED: 6061 ALUMINUM

IF FOR ANY REASON THESE STOPS ARE DAMAGED UNDER NORMAL USE. JUST SEND THEM BACK AND I’LL TAKE CARE OF YOU. This stop can be used from the left or right hand side. The pins are both set BELOW the vise jaw. This lets you machine the edge of any part right down to the jaw. These are very useful in any kind of set up where you do not want to hit the stop itself with your tool. All vise stops are inspected and tested for use. Stops will adjust to any standard vise jaw up to 1.05 inch thick. The picures show a 6 inch Kurt and a 4 inch Kurt. And keep us in mind in the future. Please check out our other tools (in the last picture) including brass tools and aluminum clamps with stainless hardware. The item “SET OF 2 MACHINIST TOOL VISE STOPS FOR CNC OR MANUAL MILL VISE LOW PROFILE” is in sale since Friday, February 03, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Workholding\Vises”. The seller is “kirk4898″ and is located in Tijeras, New Mexico. This item can be shipped worldwide.

• Country/Region of Manufacture: United States
• Model: 106
• Country of Manufacture: United States
• WRENCH INCLUDED: 6061 ALUMINUM

So he’s the boss so we just ordered a new one and I have now been tasked to sell this one. As mentioned we did not hook up the wires(which is only 4) or fill with oil. I will tell you that the unit ran fine before the motor replacement but someone complained that it seemed to be running slow and that it may need new brushes. Then the motor was bought and now a entire unit is on the way. You will get the entire unit including the rod and stops and center support. It is pictured with the dial and handle but it will NOT be included in the sale. This sale will be final so make sure it will fit your mill if it is not a Bridgeport. UPDATE – This listing will be listing will be for PARTS ONLY. Please remember that you will need to wire and add oil to make this feed work. Well here we go again. We have had many of you requesting to see the motor end, gears and the gearbox so in the morning we will once again take apart the unit and update with additional photos. I have had all kind of questions concerning the type of sealant we used, wanting to see the end of the motor to confirm its age and what the torque specs were when we reassembled. This seems to be the easiest way(not for me) for you to ensure the reassembly is just the way you desire. I will upload the additional pics. Please remember that this will not be in running condition when it arrives to your location! At a 55 degree angle relative to the sun or anything else! NEW PICTURES ARE UPDATED! The item “BRIDGEPORT Mill 6F X-AXIS Power feed with rod center support and stops. Complete” is in sale since Wednesday, September 28, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “husaler” and is located in Pensacola, Florida. This item can be shipped to United States.

• Brand: Bridgeport
• Country/Region of Manufacture: United States
• Model: 6F

For sale: A set of (two) low profile vise stops made from aluminum 6061 and fitted with stainless hardware. This stop can be used from the left or right hand side. The pins are both set BELOW the vise jaw. This lets you machine the edge of any part right down to the jaw. These are very useful in any kind of set up where you do not want to hit the stop itself with your tool. My job is to please my customers. All vise stops are inspected and tested for use. Stops will adjust to any standard vise jaw up to 1 inch thick. The picures show a 6 inch Kurt and a 4 inch Kurt. And keep us in mind in the future. Please check out our other tools (in the last picture) including brass and aluminum clamps with stainless hardware. The item “SET OF 2 MACHINIST TOOL VISE STOPS FOR CNC OR MANUAL MILL VISE LOW PROFILE” is in sale since Monday, April 13, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Workholding\Vises”. The seller is “kirk4898″ and is located in Tijeras, New Mexico. This item can be shipped worldwide.

• Country/Region of Manufacture: United States
• Model: 106
• Country of Manufacture: United States
• WRENCH INCLUDED: 6061 ALUMINUM

For sale: A set of (two) vise stops made from aluminum 6061 and fitted with stainless hardware. My job is to please my customers. All vise stops are inspected and tested for use. Stops will adjust to any standard vise jaw up to 1 inch thick. The picures show a 6 inch Kurt and a 4 inch Kurt. And keep us in mind in the future. Please check out our other tools (in the last picture) including brass and aluminum clamps with stainless hardware. The item “SET OF 2 MACHINE SHOP VISE STOPS FOR MACHINIST SET UP TOOLING” is in sale since Sunday, May 17, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Workholding\Vises”. The seller is “kirk4898″ and is located in Tijeras, New Mexico. This item can be shipped worldwide.

• Model: 101
• Country of Manufacture: United States
• WRENCH INCLUDED: 6061 ALUMINUM

For sale: A set of (two) vise stops made from aluminum 6061 and fitted with stainless hardware. My job is to please my customers. All vise stops are inspected and tested for use. Stops will adjust to any standard vise jaw up to 1 inch thick. The picures show a 6 inch Kurt and a 4 inch Kurt. And keep us in mind in the future. Please check out our other tools (in the last picture) including brass and aluminum clamps with stainless hardware. The item “SET OF 2 MACHINE SHOP VISE STOPS FOR CNC OR MANUAL MILL VISE” is in sale since Tuesday, April 28, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Workholding\Vises”. The seller is “kirk4898″ and is located in Tijeras, New Mexico. This item can be shipped worldwide.

• Model: 101
• Country of Manufacture: United States
• WRENCH INCLUDED: 6061 ALUMINUM

For sale: a set of (two) low profile vise stops made from aluminum 6061 and fitted with stainless hardware. This stop can be used from the left or right hand side. The pins are both set below the vise jaw. This lets you machine the edge of any part right down to the jaw. These are very useful in any kind of set up where you do not want to hit the stop itself with your tool. My job is to please my customers. All vise stops are inspected and tested for use. Stops will adjust to any standard vise jaw up to 1 inch thick. The picures show a 6 inch kurt and a 4 inch kurt. And keep us in mind in the future. Please check out our other tools (in the last picture) including brass and aluminum clamps with stainless hardware.The item “SET OF 2 MACHINE SHOP VISE STOPS FOR CNC OR MANUAL MILL VISE LOW PROFILE” is in sale since Monday, December 22, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Workholding\Vises”. The seller is “kirk4898″ and is located in Tijeras, New Mexico. This item can be shipped worldwide.

• Country/Region of Manufacture: United States
• Model: 106
• Country of Manufacture: United States
• WRENCH INCLUDED: 6061 ALUMINUM

And keep us in mind in the future. Please check out our other tools (in the last picture) including brass and aluminum clamps with stainless hardware.

The item “SET OF 2 MACHINE SHOP VISE STOPS FOR CNC OR MANUAL MILL VISE” is in sale since Friday, January 17, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Workholding\Vises”. The seller is “kirk4898″ and is located in Tijeras, New Mexico. This item can be shipped worldwide.

• Model: 101
• Country of Manufacture: United States
• WRENCH INCLUDED: 6061 ALUMINUM