(Stand is NOT included in this listing, please check our other listings for models with base). This machine requires a Standard 120V Power Supply! Compact, Accurate, Economical Machine. Great for those who are looking for a. Compact machine for a smaller work shop, yet need the ability to take heavier cuts. Compared with other machines in this size range. Spindle is Supported by High Precision Tapered Roller Bearings. Mill Head May be Tilted ±90° (both left and right). Precision Manual Fine Down Feed is standard. Adjustable Tapered Gibs for longer life. Positive Locks are standard for Table, Head, Quill, and Column. Easy Reading Dials Have Satin Chrome Finish, Graduated in. Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from. Generous 18-1/4? Spindle To Table Max Distance for taller work. 8-1/2? Y Axis Travel, More than other machines in this class. 3 Axis DRO Installed. Note: if a 3 axis DRO is added to the machine, the 3rd axis of the DRO reads the HEAD up and down, Not the quill, so it is not doubling up on the measurement. If you add the 3 axis DRO, now both Z Axis movements are covered. Drilling Capacity: 1-1/4? Max. End Milling Capacity: 1? Max. Face Milling Capacity: 3? Table Size: 27-1/2? X 7-1/8? Cross Travel (Y Axis): 8-1/2? Longitudinal Travel (X Axis): 15? Table Leadscrew Pitch 10 TPI. 100? Per Turn Table Dial Graduations. 001? Vertical Travel (Z Axis): 16? Max Distance Spindle to Table: 18-1/4? Taper of Spindle: R-8, w/7/16-20 Drawbar Thread Spindle (Quill) Travel: 3? T Slot Size: 1/2? (T Slots are slightly less than 1/2? , actual size 12mm, our 1/2? Kit is sized for this machine) Range of Spindle Speeds: 115 – 1700 rpm, 6 Steps Head Tilt: Left & Right ±90° Motor: 1 HP Net Weight (Not Including Base): 475 LBS Net Weight (With Optional Base): 575 LBS Power Required: 110/120V, 20A Circuit. 5′ cord, Includes 120V Plug with ground Dimensions (Assembled on stand): 39? W x 74? H x 30? D Height with head at top of Z travel: 80? (On Stand) Height with head at normal working height: 75? (On Stand) Optional Stand Height 32? Country of Origin: China. Machine Base Dimensions (Cast Iron Base of machine, where it sits on the chip pan) Approx. 13-1/2″Wx21″D Machine Base Dimension (Bolt Pattern) Approx. 11″Wx14-1/4″D Table Height, machine base (Where it sits on the chip tray) to table, approx. 8-1/2? Footprint of stand at floor, approx. 14-1/2? W x 21-1/4? Front to back. Average time delivered is 2-7 days depending on how far from Pittsburgh you are located. If you need liftgate service, please message us one you place your order to let us know. Quality Machine Tools / Precision Matthews Machinery Co. 1060 Montour West Industrial Park. We are machinists here too and have been in business for over 20 years. We know our machines and we know what we sell. So if there is any question, we can help.

This Listing is for a. With Electric Motor for Head Positioning, No more cranking the head up and down by hand! And X Axis Table Power Feed Included – BE SURE TO NOTICE THESE WHEN YOU COMPARE, OTHERS DO NOT HAVE THESE FEATURES. Here are some features of this milling machine. Quill Depth DRO, R8 Spindle Taper. Different packages available to meet user’s. Class 5 high precision spindle bearings. Generous table size and travel in a compact machine. Solid Dovetail Way Column for high rigidity and precise up and down. Easy speed changes, no need to open any covers and change belts. Just stop, flip a lever, and go. Very Solid cast iron head and body make deeper cuts no problem. Head tilts 90 degrees left and right for angled cutting. Oil Filled gearbox in head for long life. Ears in head for long life. Adjustable tapered gibs and backlash to keep the machine tight and. Precision Matthews 3-Axis Digital Readout. So with this machine, you will receive. Z Axis / Head Electric Motor for head positioning. X Axis Table Power Feed. Quill DRO is built in. Cast Iron Stand/Base as pictured. Precision Matthews 3-axis Digital Readout. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table T-Slot Size and Number. Table Travel, X Axis. Table Surface Height from floor. 34-3/4 With base flat on. Base Dimension at floor. 18-5/8″W x 27″D. Normal Working Max Height: (top of column travel motor). Height with head all the way up: (top of main motor). Stand (Base) height, to machine mounting surface. Cross Travel, Y Axis. Distance Spindle to Table. With 7/16-20 drawbar thread U. Side To Side, 90 Degrees. Some other similar machines will say. That they are 2HP, but its the SAME exact motor as this one, just rounded. Up to 2hp and marked that way, we prefer to be honest and mark it as. What it really is, which is 1.5HP. More than enough power for. Fine Grain Cast Iron. With Base, 850 Without Base. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-932M 9×32 VERTICAL MILLING MACHINE with3AXIS DRO X-AXIS PWR FEED 3YR WARRANTY” is in sale since Thursday, August 17, 2017. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Make: Precision Matthews
• Model: PM-932M w/PM-3ax & PM-932M-CASTSTAND
• Type: Manual, Vertical
• Model Year: 2017
• X-Axis Travel Bed: 21” – 25”
• Y-Axis Travel Bed: Less than 10”
• Z-Axis Travel Bed: 16” – 20”
• Highest Spindle Speed (RPM): 1501 – 2000
• Spindle Horsepower: 1.5

This Listing is for a. With Electric Motor for Head Positioning, No more cranking the head up and down by hand! And X Axis Table Power Feed Included – BE SURE TO NOTICE THESE WHEN YOU COMPARE, OTHERS DO NOT HAVE THESE FEATURES. Here are some features of this milling machine. Quill Depth DRO, R8 Spindle Taper. Different packages available to meet user’s. Class 5 high precision spindle bearings. Generous table size and travel in a compact machine. Solid Dovetail Way Column for high rigidity and precise up and down. Easy speed changes, no need to open any covers and change belts. Just stop, flip a lever, and go. Very Solid cast iron head and body make deeper cuts no problem. Head tilts 90 degrees left and right for angled cutting. Oil Filled gearbox in head for long life. Ears in head for long life. Adjustable tapered gibs and backlash to keep the machine tight and. Precision Matthews 3-Axis Digital Readout. So with this machine, you will receive. Z Axis / Head Electric Motor for head positioning. X Axis Table Power Feed. Quill DRO is built in. Cast Iron Stand/Base as pictured. Precision Matthews 3-axis Digital Readout. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table T-Slot Size and Number. Table Travel, X Axis. Table Surface Height from floor. 34-3/4 With base flat on. Base Dimension at floor. 18-5/8″W x 27″D. Normal Working Max Height: (top of column travel motor). Height with head all the way up: (top of main motor). Stand (Base) height, to machine mounting surface. Cross Travel, Y Axis. Distance Spindle to Table. With 7/16-20 drawbar thread U. Side To Side, 90 Degrees. Some other similar machines will say. That they are 2HP, but its the SAME exact motor as this one, just rounded. Up to 2hp and marked that way, we prefer to be honest and mark it as. What it really is, which is 1.5HP. More than enough power for. Fine Grain Cast Iron. With Base, 850 Without Base. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-932M 9×32 VERTICAL MILLING MACHINE with3AXIS DRO X-AXIS PWR FEED 3YR WARRANTY” is in sale since Wednesday, May 24, 2017. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• Make: Precision Matthews
• Model: PM-932M w/PM-3ax & PM-932M-CASTSTAND
• Type: Manual, Vertical
• Model Year: 2017
• X-Axis Travel Bed: 21” – 25”
• Y-Axis Travel Bed: Less than 10”
• Z-Axis Travel Bed: 16” – 20”
• Highest Spindle Speed (RPM): 1501 – 2000
• Spindle Horsepower: 1.5

MACHINE: Used Supermax YCM-2GS Horizontal / Vertical Milling Machine with 5 HP NST 40 taper on both spindles. S/N: 091759, Mfg: 1986, 208 – 230V 3 Ph only. FEATURES: Has 3 axis power feed with rapid traverse. Variable speed belt drive vertical head has speeds 75-4200 rpm’s. Both drives run fine. Table is 11″x 51″. All functions work fine. Box Ways look fine. See attached spec-sheet for details. TOOLING: Includes fully detailed manual, (2) horizontal arbor supports, arbor and factory supplied tooling package. READ OUT: Acu-Rite 3-axis Millvison Readout Display with precision. 00025 (X Y Z) Glass Scales. Digital scale on quill. Never used for production. Mill built heavy duty at 5800 lbs. We have full dock height access for your easy lift-truck loading. This is a non-exclusive local sale offer. The item “Supermax Vertical / Horizontal Mill, 5hp, YCM-2GS with3axis AcuRite, 11 x 51 table” is in sale since Wednesday, March 29, 2017. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “legacytool” and is located in Charlotte, North Carolina. This item can be shipped to United States.

• Model: YCM-2GS
• Make: Supermax
• Model Year: 1986
• Type: Manual, Horizontal / Vertical
• Spindle Horsepower: 5
• Serial Number: 091759
• Table Length: 40” – 59.9”
• Country/Region of Manufacture: Taiwan
• Table Width: 10” – 14.9”
• Highest Spindle Speed (RPM): 4001 – 4500
• Y-Axis Travel Bed: 10” – 15”
• X-Axis Travel Bed: 36” – 40”
• Z-Axis Travel Bed: 16” – 20”
• MPN: YCM-2GS