Moore 3 Jig Borer w/tooling as shown, power 220V, 3 phase, 7.7A full load, 110V control. From a closing industrial facility. Untested but presumed to be working well. You are welcome to test it under power at our facility in Bensenville, IL.

FADAL 904-1 VMC 2216HT CNC VERTICAL MACHINING CENTER w/TOOLING (Request Pics of Tooling). MODEL : 904-1 VMC 2216HT. FULL LOAD CURRENT: 45/22.5 AMP. SHORT CIRCUIT INTERRUPTING CAPACITY: 200 Ka. TABLE SIZE: 39″ x 16″. MAX TABLE WEIGHT: 750 LBS. SPINDLE MOTOR: 15 HP. TOOL CHANGER: 21 ATC (UMBRELLA). This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “essindustrial” and is located in this country: US. This item can be shipped to United States.

• Brand: Fadal
• Spindle Horsepower: 15 hp
• Function: Milling
• Control: CNC
• Model Year: 1996
• Machine Type: Machining Center
• Voltage: 440 V
• Model: 904-1 VMC 2216HT
• Spindle Taper: CAT 40
• Country/Region of Manufacture: United States

FADAL 904-1 VMC 2216HT CNC VERTICAL MACHINING CENTER w/TOOLING (Request Pics of Tooling). MODEL : 904-1 VMC 2216HT. FULL LOAD CURRENT: 45/22.5 AMP. SHORT CIRCUIT INTERRUPTING CAPACITY: 200 Ka. TABLE SIZE: 39″ x 16″. MAX TABLE WEIGHT: 750 LBS. SPINDLE MOTOR: 15 HP. TOOL CHANGER: 21 ATC (UMBRELLA). This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “essindustrial” and is located in this country: US. This item can be shipped to United States.

• Brand: Fadal
• Spindle Horsepower: 15 hp
• Function: Milling
• Control: CNC
• Model Year: 1996
• Machine Type: Machining Center
• Voltage: 440 V
• Model: 904-1 VMC 2216HT
• Spindle Taper: CAT 40
• Country/Region of Manufacture: United States

FADAL 904-1 VMC 2216HT CNC VERTICAL MACHINING CENTER w/TOOLING (Request Pics of Tooling). MODEL : 904-1 VMC 2216HT. FULL LOAD CURRENT: 45/22.5 AMP. SHORT CIRCUIT INTERRUPTING CAPACITY: 200 Ka. TABLE SIZE: 39″ x 16″. MAX TABLE WEIGHT: 750 LBS. SPINDLE MOTOR: 15 HP. TOOL CHANGER: 21 ATC (UMBRELLA). This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “essindustrial” and is located in this country: US. This item can be shipped to United States.

• Brand: Fadal
• Spindle Horsepower: 15 hp
• Function: Milling
• Control: CNC
• Model Year: 1996
• Machine Type: Machining Center
• Voltage: 440 V
• Model: 904-1 VMC 2216HT
• Spindle Taper: CAT 40
• Country/Region of Manufacture: United States

All wording in this sale is 100% and should be considered in total when determining value. You can return this item for up to 30 days. Become a maker, expand your shop tooling, your options are limitless with this machine. Includes all you see and more. Travel is 10″ x-axis, 14″ y-axis, 6 z-axis (adjustable), and rotary a-axis ER32 spindle. HEAVY 1/2″ Thick 12×24″ Steel Bed (machined) w/steel footers. 2 Steel tube gantry. 2 1×13 steel rails on THK HSR25H bearing blocks. 25 pitch leadscrew (x-axis). 1 10 1.5mm pitch (z-axis). 1 18 10mm pitch precision ballscrew (y-axis). 2 Nema 23 high performance steppers (x and a-axis). 2 Nema 23 steppers (y and z-axis) (more than adequate). 1 1″x10″ rail and THK HSR25H bearing for counter-weight (z-axis). Rotary axis with ER32 collet spindle. Water cooled main spindle 10k RPM ER11 collet with pump and frequency drive included. 3 axis drivers are DM556 and 1 is ST330 v3. Power supplies included are 24V 15amp and 12 volt 50 amp. 1 Electronic touchscreen power control station, independently control 7 120v outlets. Dial Indicator w/Magnetic base plus 1 micro base. 4 Limit switches included +1 mounted switch for z-axis. Rigid z-axis made from structural aluminum and beefy mounting bracket all on THK HSR25H bearings. Rear counterweight relieves weight from leadscrew. Also included but not fully pictured is the TOOLING w/ Case. All tooling is new or like new. 1 3 flute 3/8″ endmill with 1.5″ EFL (can only fit rotary collet) carbide. 1 5/16 endmill for wood only 2-flute. 3 1/8 engraving 30-deg included carbide. 14 1/8″ carbide endmills 1/2″ EFL. 2 1/8 carbide ballnose endmill. 1 1/4″ x 3″ EFL 6 OAL Carbide Long Reach Endmill. 1/8, 1/4, 3/8, 1/2, 5/8 + whatever size is used for ring mandrel (included) graduated sizing universal ring mandrel for rotary. 1/8, 1.5-7mm set. 3 electrical connections for drivers. 3 misc lathe turning tools. Replacement bearings for leadscrews/ballscrew bearings. 5 gallon bucket and tubing for coolant fluid, + industrial submergible pump. Machine was disconnected when last moved, you will need to re-wire the controllers to Grbl board and drivers. There is a 20# piece of titanium shown mounted to the counterweight mechanism which is not included! Approximately 20 pounds will be needed to mount to the rear counterweight to compensate for the headweight. Check out my other items listed. I’m adding more every day! This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “chris_crafter” and is located in this country: US. This item can be shipped to United States.

• Control: CNC
• Machine Type: Milling Machine

HAS A DRO AND POWER FEED CHUCK COLLETS AND MORE VISE COLLETS DRILL CHUCK. LOOK AT THE KNEE ALL ORIGINAL FLAKING. The item “Vari Speed Bridgeport Milling Machine WithTOOLING” is in sale since Tuesday, September 24, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jerbou-89″ and is located in Bristol, Connecticut. This item can be shipped to United States.

• MPN: Does Not Apply
• Brand: BRIDGEPORT

One owner, less than 1 hours of use, plugged in and turned on a couple times but never used. Comes with the owners manual and everything shown in the photos, Sanou 1-13mm B-16 drill chuck, arbors, tool holders, collets, Grizzly boring head R-8 with integral shank, etc. Everything shown in the photos. Machine will be fully crated and you will have to pick-up at your nearest Fastenal dealer. Local pick-up welcome no charge and we are in Longmont, Colorado. Check out my other items. The item “Precision Matthews PM-932M Geared Head Milling & Drilling Machine withTooling Mint” is in sale since Thursday, September 26, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “mlg-0724″ and is located in Longmont, Colorado. This item can be shipped to United States.

• Machine Type: Milling & Drilling Machine
• Brand: Precision Matthews