CNC 3018 Pro Laser Engraver CNC Milling Machine 3 Axis GRBL Offline Control DIY

Thank you for your understanding and support! 24V 5A (Input AC100- 240V US/ EU optional). PC-USB connection (xp win7 win8 win10) / offline. GRBL controller, Candle(new version). Relief, drill hole, cut. Wood, plastic, pcb, acrylic, plywood and so on. Laser GRBL, engraver master, Lightburn. 0.5w/2.5w/3.5w/5.5w/15w 5.5W&15W Can engrave. Card, bamboo, stone, wood, leather, plastic, pcb, acrylic. Corkwood stainless steel, anodized aluminum and so on. Package1: 1Engraving machine + 1 ER11 +10 Cutters+4 Plates +14G U Disk. Package2: 1 Engraving machine + 1 ER11 +10 Cutters+4 Plates + 1 Laser(0.5w-15w) + 14G U Disk. Pack:age1: 1 Engraving machine + 1 ER11 +10 Cutters+4 Plates +. Package2: 1 Engraving machine + 1 ER11 +10 Cutters+4 Plates + 1 Laser (0.5w-15w)+. Laser module: 0.5w, 2.5W, 3.5W, 5.5W, 15W. Engraving distance:less than 3cm, 15W is fixed focus. Laser wavelength: 445nm-450nm blue laser. Output power: 0.5w, 1.5W, 2.5W, 4W, 5W. Drive mode: external ACC constant current drive. Cooling method: forced air cooling. Operating voltage: 12V DC. Control interface: 2 2.54 (TTL control switch, PWM control power). Shell material: aluminum, surface anodized. Collimator lens: optical glass coating. Optical power output:5.5W. Beam Shape:Dot(fixed focues). Life Time:10000-20,000 hours. Heatsink Material:Aircraft Aluminum +Blue Shell. Cooling Mode:Temperature sensor intelligent control + 10000 rpm 40mm cooling fan. TTL&PWM Modulation:YES, Compatible with Both TTL & PWM Modulation. New high-speed 1inch Grbl offline controller Linking Grbl motherboards allows you to engrave files offline. Read 600 files at a time. You can connect a computer USB to transfer files to this controller. Compatible with all versions of Grbl. The baud rate is adjustable. Press Z+ and Z-: the Z axis will move up and down. Press X+ and X-: the X axis will move left and right. Press Y+ and Y-: the Y axis will move Front and Back. Press SPIN: Spindle on (Laser on), Spindle off (laser off). Press Z+ for 5 seconds: change the Language to English. SD card: SD card reader is to write into the root directory G-code files.