Maxnc 10 CNC Ready Mini Mill Milling Machine With 4th Axis and Power Supply.

This Klutch Mini Milling Machine is a cast iron milling machine that runs vibration free for smooth operation. The 1/2 HP, 110V variable-speed motor with a 2-speed gearbox delivers 350 Watt power. Milling head and column tilts to 45 left or right for added versatility. 1/2, Dimensions L x W x H in. 20 1/2 x 20 1/16 x 29 15/16, Drilling Capacity in. 1/2, Light Included No, Speed RPM Variable, Stand Included No, Volts 110, Worktable L x W in. 3 5/8 x 15 3/8, 360 Head Swivel No, HP 0.5. Work table with 8 5/8in. Longitudinal travel and 4in. Headstock travel Coarse down feed control for drilling Fine down feed control for accurate tool height setting 1/2in. End mill capacity and 1 3/16in. Klutch Mini Milling Machine – 350 Watts, 1/2 HP, 110V. Northern Tool Item# 49657. 133.0000 lb(s). This Klutch® Mini Milling Machine is a cast iron milling machine that runs vibration free for smooth operation. Milling head and column tilts to 45° left or right for added versatility. Chuck Size: 1/2 in, Dimensions L x W x H in. : 20.5 x 20.06 x 29.93 in, Drilling Capacity: 1/2 in, Horsepower: 0.5 HP, Light Included: No, Product Type: Milling Machine, Stand Included: No, Volts: 110, 360 Degree Head Swivel: No. Coarse down feed control for drilling. Fine down feed control for accurate tool height setting. Has R8 spindle, collet and drawbar. Suitable for different size R8 collets (not included): 1/8in. Longitudinal axis (X): 220mm; Cross axis (Y): 100mm; Headstock travel (Z): 180mm; Throat: 167mm; Table effective size: 390x92mm; T-slot size: 12mm. All orders will contain an invoice/receipt. IMPORTANT: We will not honor requests to remove invoices or receipts from packages. If a PO box address is submitted without a physical address it may delay your order. We may already have an answer to your question! We reserve the right to correct ad errors and/or omissions. Pricing and availability is subject to change without notice. WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.

Wheeler Machinery Sales, Inc. Financing Available / Se Habla Español. Have two warehouses full of used equipment and tooling, and always getting new inventory. Southwestern Trak 2OP-M10 Mini Vertical Machining Center #6763 #2. TRAK 2op Features:ProtoTRAK TMX CNC. 8 station tool changer. X, Y, Z travels: 14″ x 12″ x 17? Footprint of 2.5′ x 4. Integrated JergensT Ball Lock system. Machine W x D x H (with head all the way up) – 30.5″ x 52″ x 101. Min height to fit through doorway – 92. Table size – 18″ x 15″. Tee slot width – 0.630 or 16 mm. Max table load – 500 lbs. Ball Lock ® hold down force – 2250 lbs. X, Y, Z Travels – 14″ x 12″ x 17. Max distance from spindle nose table surface – 20.25. Min distance from spindle nose table surface – 2.75. Max swing clearance from spindle center to column – 14. Max Rapid speed X, Y & Z-axis, inches per minute – 600. Tool holder type – BT30. Spindle nose diameter – 2.2 or 56 mm. Max RPM – 5000. ATC Tool Capacity – 8. Max tool Diameter – 2. Retention Knob – BT30. Air Pressure/CFM – 90 psi, 2.5 at 90 psi.

Wheeler Machinery Sales, Inc. Financing Available / Se Habla Español. Have two warehouses full of used equipment and tooling, and always getting new inventory. Southwestern Trak 2OP-M10 Mini Vertical Machining Center #6763 #2. TRAK 2op Features:ProtoTRAK TMX CNC. 8 station tool changer. X, Y, Z travels: 14″ x 12″ x 17? Footprint of 2.5′ x 4. Integrated JergensT Ball Lock system. Machine W x D x H (with head all the way up) – 30.5″ x 52″ x 101. Min height to fit through doorway – 92. Table size – 18″ x 15″. Tee slot width – 0.630 or 16 mm. Max table load – 500 lbs. Ball Lock ® hold down force – 2250 lbs. X, Y, Z Travels – 14″ x 12″ x 17. Max distance from spindle nose table surface – 20.25. Min distance from spindle nose table surface – 2.75. Max swing clearance from spindle center to column – 14. Max Rapid speed X, Y & Z-axis, inches per minute – 600. Tool holder type – BT30. Spindle nose diameter – 2.2 or 56 mm. Max RPM – 5000. ATC Tool Capacity – 8. Max tool Diameter – 2. Retention Knob – BT30. Air Pressure/CFM – 90 psi, 2.5 at 90 psi.

Juvenile Activity Center, School General Technical Room, Science and Technology Activity Room Equipment, Science and Technology Museum Student Science and Technology Creation. The main components of the main shaft box, intermediate block, connecting block, tailstock, large slider, small slider, hand wheel, support and so on are made of metal. The quality of the product is improved, more durable and more precise. Input voltage: AC100V240V / 50/60HZ. Output voltage: DC12V 2A. Motor rated power: 12W. Motor speed: 18000r/min±15% of high speed motor. Low speed motor: 10000r/min ± 15%. Spindle speed: high speed motor 3000r/min±15%. Low speed motor: 1600r/min ± 15%. Large slider stroke: 45mm. Small slider stroke: 35mm. Vise clamp size: 25mm35mm. Handle scale: 0.1mm/division. Processing ability: It can process soft metals such as copper and aluminum. 1 x Milling Machine.

Up for your consideration is this Haas 3 axis vertical Mini Mill manufactured in 2000. It is good working condition. Please see all photos as part of the description. Serial number is 21194. Actual table size: 12 x 28 inches. CT Tooling / DIN ISO Tooling. Z Axis 10 inch travel. Feed Rate 500 IPM Max. Table Load 500 lbs. Spindle Nose to Table Ranges 4 to 14 inches. Tool Holder Carriage holds up to 10 tool holders. Thank you for looking.

The tool used for milling machine is a milling cutter. The side and front of the milling cutter are both cutting edges. It has certain dangers, so it must be used under the guidance of professionals. 2, the main parts of the machine: such as the spindle box, long base, short base, large slider, small slider, motor blades, connecting blocks, gears, etc. Are made of metal materials. 1, motor speed: 20000 rev / min (optional 12000 rev / min). Input voltage / current / power /: 12VDC / 2A / 24W. 3, Y, Z axis slider stroke: 30mm, X axis slider stroke: 145mm. 5, the maximum clamping size of the vise: 50mm. 6, the hand wheel has a 0.02mm precision scale line, increasing the accuracy of the machine tool workpiece. Applicable processing: wood, soft metal gold, silver, copper, aluminum, etc. , plexiglass, plastic and so on. 7, accuracy 0.07mm. 1x A set of Milling Machine. 1x Speed Control Adapter.