Used Bridgeport Series 1 Milling machine for sale. 9″ x 36″ table. Equipped with vise, Bijur lube system and Bridgeport power feed. Power feed is missing linkage but does function manually. AS IS, WHERE IS. 2 WEEKS TO CLEAR BEFORE ITEM IS RELEASED. NO CHARGE TO LOAD ON TRUCK IF UNDER 7,500 LBS – IF OVER ADDITIONAL CHARGES APPLY. Used machines may not incorporate approved activating mechanisms, operator safety devices, or safety guards, as required by OSHA or otherwise. It is the purchasers responsibility that the said used machines be so equipped and safe-guarded to meet OSHA and other requirements before placing such machinery into operation. The covenants expressed herein shall be servable, and the invalidity, now or in the future of any of the covenants recited. Herein shall not affect the validity of the remaining covenants. Under no circumstances shall we or any affiliate of ours have any liability whatsoever for the loss of use or for any indirect or consequential damages. The item “Bridgeport Series 1 Milling Machine” is in sale since Friday, September 24, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “0030777″ and is located in Warminster, Pennsylvania. This item can be shipped to United States.

• Model: Bridgeport Series 1
• Spindle Horsepower: 1-1/2
• Country/Region of Manufacture: United States
• Machine Type: Milling Machine
• Table Length: 36
• Model Year: 1971
• Brand: Bridgeport
• Table Width: 9
• Control: Manual
• Voltage: 220 V

This is a Brown and Sharpe machine from way back. Has been stored in a covered area. Should work as intended. Has been used for gear work. The gear box and motor information is in the pictures. The item “Brown and Sharpe Horizontal Milling Machine” is in sale since Friday, July 16, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jwat7186″ and is located in Donalds, South Carolina. This item can’t be shipped, the buyer must pick up the item.

• Model: Gorton P2-3
• Machine Type: Milling Machine
• Model Year: Unknown
• Power Source: Electric
• Function: Milling
• Brand: Brown & Sharpe
• Control: Manual

Bridgeport milling machine used. Only used in a high school shop class. Models vary but are similar. The item “Bridgeport milling machine used” is in sale since Thursday, September 16, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dbabz31″ and is located in Aurora, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Machine Type: Milling Machine

Maxi Torque Rite Power Draw Bar – Authorized Distributor – Proudly Made in the USA. Maxi torque rite drawbar Tech Data and Quantity Specials. SEE OTHER MAXI TORQUE MODELS FOR SALE SPECIFY MODEL & SPINDLE TYPE. Acer Models R8 MILLS. Maxi Torque Rite Air Power Draw Bar For Manual & CNC Milling Machines. TR100-DB Automatic Drawbar complete system (shown above). Maxi Torque Rite Air Power Draw Bar is a Air Powered Drawbar Pneumatically Operated. TR100-DBxxx Automatic Drawbar complete system. Fits Bridgeport Sharp-Kent -Acer Manual Milling Machines WITH R-8 SPINDLE. SELECT 2 & 3 Axis BRIDGEPORT CNC Milling Mills. Saves Labor Time in Tool Changeovers. Improves work Holding Accuracy and Repeatability. Ergonomically Designed for Ease of Operator Repetitive Usage! Factory Trained Full Support and Service with Local Stocked Parts Availability and Interchangeability. COMPARE OUR 100% USA MADE with Our Superior Quality, performance, manufacturing features and LOW COST. Maxi Torque Rite Air Power Draw Bar. The item “MAXI TORQUE Air Power Drawbar KIT-Clausing-Sharp-Kent-Acer-LagunManual Mills-R8″ is in sale since Sunday, December 17, 2017. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machinery4less” and is located in Greeneville, Tennessee. This item can be shipped to United States, Canada.

• Model: TR100-DB100
• Country/Region of Manufacture: United States
• MPN: TR100-DB100
• Brand: MAXI TORQUE

Proto Trak B3 Sport (like DPM3) Vertical Bed Mill. With SM3 CNC Controls. The following Service has just been Completed. All new bearings in variable speed head Including New variable speed belt. Table removed and cleaned. All oil gallies have been cleaned, flushed, and verified oiling correctly. Ball screwed cleaned and flushed with new oil. New rubber lines replaced to ball screws. This is a very nice Mill that runs smooth and quite. Video of machine operation can be shared upon request. Table size 50 X 10 with 3 t-slots. Travel X-29 / Y-16 / Z-24.150. Maximum weight of work piece: 1,320 LBS. Milling head swivels right & left: 90 Degrees. Spindle taper: #40 N. (3) power quill feeds. Distance, center-line of spindle to face of column: 17.3. Variable spindle speeds 70-4200 RPM. Full 3-axis CNC machining control or hand wheels for manual operation. Precision and ground ball screws installed in table(X), saddle(Y), and column(Z). Approximate Weight: 4,200 Lbs. Approximate Dimensions: 71 x 71 x 84 H. Dual floppy disc drives. (cleaned, flushed, and filled with new oil). Torque Rite power drawbar. Any Question please contact Brandon Varney. The item “Southwestern Industries Proto Trak CNC Milling Machine 3 AXIS B3 Sport (DPM)” is in sale since Tuesday, July 6, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “brandon874.1″ and is located in Grafton, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Control: CNC
• Machine Type: Milling Machine
• Model: B3

3.5 Floppy Drive. Used Equipment Sales Contact. To see if you qualify contact Celeste Bozzi. Please verify it’s availability before purchasing! Skidding/Crating of items are extra costs. All items are subject to prior sale. Established 2009, 520 Machinery Sales is a full service machine tool distribution company servicing the Northern Illinois territory for new equipment and across the nation for Used Equipment. We have recently opened a satellite office in Phoenix AZ for Used Equipment sales. 520 Machinery Sales consists of a 30 person team; which includes two office administrators, eight new equipment sales professionals, ten Used Equipment sales professionals, ten Service and Application Engineers including a dedicated Parts Manager. Also, included is an automation specialist for robotics and custom applications. Our service personnel are involved in factory training including both Fanuc and Mitsubishi programming. Our locations include a 10,000 sq. Office and showroom in Schaumburg along with an additional 5,000 sq. Used Equipment Center also located in Schaumburg and a 2000 sq. Sales office in Phoenix. We have been awarded with winning Service and Sales achievements in 2017 and have achieved builder sales quotas in all years since 2010. Product offerings include: Samsung Machine Tools, Muratec Machinery, Tornos, Milltronics Machinery along with various machine tool accessory offerings. Our company mission is to support our customers by providing superior products and services of exceptional value which help them gain competitive advantage in their market. 520 Machinery Sales strives to provide the highest standards of service available through our highly trained sales and service personnel. We provide work environments where our employees can meet their potential and thrive in an atmosphere of excellence. We strive to exceed the industry standard in service to customers while maintaining a superior level of integrity in interactions with business partners and associates. 520 Machinery Sales appreciates our achieved success and conduct our business as model corporate citizens. John Schneider; Co-Owner of 520 Machinery Sales. With 24 years of machine tool sales history and previously worked for family business of a contract machining company. Everett Dahlberg; Co-Owner of 520 Machinery Sales. With over 25 years of sales history with over 20 years of machine tool sales experience. Dave Fahlgren; Co-Owner of 520 Machinery Sales. With 15 years of machine tool sales experience. Wes Kowalczyk: Over twenty years of machine tool sales experience and joined the 520 sales staff in 2011. Mike Land- 30 years of machine tool sales experience and joined the 520 sales staff in 2015. Dan Anderson- 20 years of machine tool sales experience and joined the 520 sales staff in 2019. Brian Doherty- Has ten years of industrial sales experience and joined the 520 sales staff in 2015. In addition to our new sales team, 520 machinery has a 9 person strong used equipment team. The used equipment team helps to generate new equipment sales through various outlets not traditionally used for new equipment. The inside sales role of 520′s used equipment team is something that sets 520 apart from our competition. The used equipment team is as follows. Mark Lipowski- used equipment manager, 20+ years in used equipment sales. Bob Nelson- 20+ years in used equipment sales. Jason Stob- 12+ years in used equipment sales. Nate Parker- 10+ years in used equipment sales. Brian Foerster- 5+ years in used equipment sales. Zeno Molteni- 5+ years in used equipment sales. Our company philosophy has and will be to maintain the highest degree of integrity along with a teamwork mentality when working with customers, builders and vendors. We are financially strong and we pride ourselves on our ability of making payments in a timely manner. Data base of northern Illinois territory with Sales Force as the CRM. Aggressive marketing campaigns consisting of cold calling, direct mailings, mass e-mails, websites, trade association involvement and telemarketing. Our used equipment staff has been trained to augment our new equipment sales by offering trade-in programs, often times with other machine tool distributors all across the country. The item “Used Haas Mini Mill CNC Vertical Machining Center CT-40 4th Axis Ready Rigid Tap” is in sale since Monday, September 27, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “520machinery” and is located in Schaumburg, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Model: Haas CT-40 4th Axis
• Modified Item: No
• Custom Bundle: No
• Machine Type: Machining Center
• Model Year: 2000
• Power Source: Electric
• Non-Domestic Product: No
• Function: Drilling
• Type: CNC, Vertical
• Brand: Haas
• Control: CNC

2000 Matsuura ES-450HII CNC Horizontal Machining Center Full 4th 15k RPM. CNC Horizontal Machining Center. Pallet Size (Millimeters) 300. Pallet Size 11.81″ x 11.81″. Tool Magazine Capacity 30 ATC. Spindle Speed 15,000 RPM. Spindle Taper BT 40. 400 lbs Pallet Capacity. 8070294 2000 Matsuura ES-450 CNC Vertical Machining Center. Video will open in a new window. Using the mobile app? At KD Capital, we take pride in offering an unparalleled customer experience. As a family owned and operated business, our company has grown into one of the largest used machinery dealers in North America. We are proud of our diverse and attentive staff and strive to ensure that our customers are treated fairly. We hold ourselves to the highest standards in honest and integrity, and work diligently with our clients to uphold our reputation. Most importantly, we believe in a philosophy of building and maintaining long-term relationships. This includes all types of CNC, Machining/Turning Centers, Lathes, Mills, Boring Mills, EDMs, Routers, Plasma Cutters, Lasers, Waterjets, Shears, Press Brakes, Plate Rolls, Folders, Welders, Blow Molders, Extruders, Injection Molders, Thermo Formers, Support Equipment, and more! With over 150 years of combined experience in the field, KD Capital is an established provider of plastic injection molding equipment, CNC milling machines, and other manufacturing equipment. We work with you to find the right industrial machine tools, and provide services to help you with financing machines, liquidation, appraisals, and more. For this reason, we make sure to hire the most knowledgeable and client-oriented customer service representatives to ensure you get the service you deserve. All descriptions of the item are not warranties & are for illustration purposes only & are intended only as a guide and their accuracy is not guaranteed. Add to Favorite Sellers. Sign up to Newsletter. View more great items. 2006 Haas EC-400 CNC Horizontal Machining Center 70 ATC 12k RPM TSC Full 4th. $59,999.00. This listing is currently undergoing maintenance, we apologise for any inconvenience caused. The item “2000 Matsuura ES-450HII CNC Horizontal Machining Center Full 4th 15k RPM” is in sale since Wednesday, August 11, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “kdcapitalequipment” and is located in Call for Details. This item can be shipped to United States.

• Model: ES-450HII
• Machine Type: Horizontal Milling Machine
• Max Spindle Speed (RPM): 15000
• Model Year: 2000
• Spindle Taper: BT 40
• Function: Milling
• Brand: Matsuura
• Control: CNC

Haas Mini Mill 2000 with: Haas Control, 16″ x 12″ x 10 Travels, 10-ATC, and Coolant Tank. Category: Machining Centers Sub Category: Vertical Machining Centers. 6359 Age: 2000 Serial # : 22876 Location: Fullerton, CA. Table (LxW) 36″ x 12″. Work Area 28.75. Weight on Table 500 lbs. Spindle Speed 6000 RPM. Motor 7.5 HP. Tool Diameter 3.5. Haas CNC Control, 10-ATC, and Coolant Tank. TERMS AND CONDITIONS OF SALES. STANDARD TERMS AND CONDITIONS OF SALE. Please Do Not Pay until you have received our invoice. Items not paid within 10 days from the end of sale, will be re-listed. Any item not picked up within 30 days from End of Sale, will be charged 10% of items cost per month for storage. It is the Buyers (users) responsibility to provide proper safety devices and equipment for any particular use, operation, or setup, and to take all necessary steps to conform to all federal, state, and local government safety standards, including OSHA. Ships to: United States. You are covered by the. If you received an item that is not as described in the listing. The item “Haas Mini Mill 2000, 16x12x10 Travels, 10-ATC, 6000 RPM Spindle, Coolant Tank” is in sale since Wednesday, September 8, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “act4machinery” and is located in Fullerton, California. This item can be shipped to United States.

• Model: Mini Mill
• Modified Item: No
• Spindle Horsepower: 7.5 hp
• Country/Region of Manufacture: United States
• Custom Bundle: No
• Machine Type: Toolroom Mill
• Table Length: 36 in
• Max Spindle Speed (RPM): 6000 RPM
• Model Year: 2000
• X-Axis Travel Bed: 16 in
• Y-Axis Travel Bed: 12 in
• Z-Axis Travel Bed: 10 in
• MPN: Does Not Apply
• Spindle Taper: 40
• Function: Milling
• Brand: Haas
• Table Width: 12 in
• Control: CNC