Mill is in good working order with all belts and shields present. Has working power feed. Includes 3×3 swivel vise, overarm bar, 7/8 and 1 inch spindles, a gooseneck lamp, all screws for table, all wrenches except wrench to fasten vise to table, 4-number 2 Morse end mill holders in 4 sizes. I added two full suspension drawers to stand. Includes photocopies of Atlas Horizontal mill catalog from 1950, 1962 parts list and several Popular mechanics articles on use of mill. The item “Nice Atlas MFC Mill Horizontal Milling Machine On Original Atlas Stand” is in sale since Wednesday, May 23, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “johschambe_0″ and is located in Fort Wayne, Indiana. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas
• Model: Horizontal Milling Machine
• Country/Region of Manufacture: United States
• MPN: MFC

Really nice unrestored Atlas MFC Horizontal Mill on original Atlas stand. This is a one owner, very lightly used mill with original paint. It is complete and original except for a replacement 1/2 HP motor. It comes with the tooling pictured including both a 1″ and 7/8″ arbor. It runs and operates as it should with no issues. The milling table is flawless, with no errant mill marks. The mill itself has a couple of small spots of minor paint loss. The stand has them as well. You would be hard pressed to find a nicer example of one of these. This machine is also offered for sale locally, so listing can end at any time. The item “Nice Atlas MFC Mill Horizontal Milling Machine On Original Atlas Stand” is in sale since Saturday, April 21, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mudshark333″ and is located in Tiverton, Rhode Island. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas
• Model: Horizontal Milling Machine
• Country/Region of Manufacture: United States
• MPN: MFC

Bought this machine to make a few rifle parts, used it several times , This machine is dirty, all parts are there and we can plug it in and watch it run.. I have a couple tool holders. The item “Machinist Atlas 7B metal Shaper, 7 inch stroke, complete wo vise” is in sale since Wednesday, April 18, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “desrockwell” and is located in Jamestown, New York. This item can be shipped to United States.

• Brand: Atlas

UP FOR SALE IS AN ORIGINAL ATLAS SHAPER VISE S7-91X IN EXCELLENT WORKING CONDITION. READY TO MOUNT ON YOUR 7B SHAPER. PREVIOUS OWNER SAID THE HANDLE IS NOT ORIGINAL, BUT FITS PERFECT. NO ENGRAVINGS OR DRILL MARKS. YOU WILL GET THE PART JUST LIKE YOU SEE IT IN THE PICTURE. SEE MY OTHER AUCTIONS FOR MORE LATHE PARTS AND OTHER INTERESTING ITEMS. Is expected within 7 days. M to 10 p. THANK YOU FOR LOOKING AT MY AUCTIONS. Try Vendio Gallery Risk FREE! The item “ORIGINAL ATLAS SHAPER VISE S7-91X NICE” is in sale since Sunday, March 18, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “leelyova” and is located in Pompano Beach, Florida. This item can be shipped to United States, Canada.

• Brand: ATLAS
• Country/Region of Manufacture: United States
• Model: S7-91X
• MPN: S7-91X

Good restoration project, original stand and vise. Not sure if anything is missing. All the guards are there but 1 has a broken hinge. The Atlas brochure gives a net weight of 261 lbs and 138 for the stand. Skidded, it will probably weigh around 450. Unloading it will be the buyers responsibility. I will skid it and put it on a truck. The item “Atlas metal shaper” is in sale since Tuesday, March 13, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “drlroth” and is located in Chicago, Illinois. This item can’t be shipped, the buyer must pick up the item.

I have been told this is an Ammco shaper dividing head. It appears to be in very nice shape. There are no cracks or breaks in the castings. All of the thumbscrews turn easily as does the main shaft. There is no name on the unit. It comes with two dividing plates (30, 36, & 28, 48). It appears that most of the original paint is intact. Please look at the pictures carefully to judge actual condition. Please check out my other auctions. I have other machinist items available. The item “Ammco 7 Shaper Dividing Index Head Watchmaker Atlas” is in sale since Monday, January 22, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “epm0114″ and is located in Collegeville, Pennsylvania. This item can be shipped to United States.

• Brand: Ammco
• MPN: none

Tested working Atlas horizontal milling machine in used condition. This is a nice compact bench top milling machine typically used by gunsmiths, model engine and train enthusiasts, hobby/home machinist, and sometimes found in machine shops being use as a keyway cutting machine. These machines work great for what they were intended to do, and as long as you do not need something in a hurry and try to overwork it, it should last a long while. The previous owner painted it a green color and that paint is flaking off, leaving behind some of the original grey. Comes with 7/8 arbor, small vise, and a few cutters. I have owned a few of these over the years and used this mill for about 4 hours and just want to be thorough in my listing and tell you everything that I noticed, I may not have seen everything but I did do a somewhat thorough investigation into its condition. The side belt cover is there but the swivel ears are repaired and may continue to hold but they may not. The side belt cover needs to have a latch of some sort as it will move in towards the belt during operation. The top belt cover has a crack at the one corner, it does not seem to affect anything but want to tell you it’s there. The powerfeed direction lever was repaired at some point and worked as it should while I was using it. The feeds do have some play as with most of these mills you will find. The drawbar is not original but seems to work like it should. The mid plate has a broken corner(see one of the pics with finger pointing). There are a couple knobs/handles that have been replaced by a shop found item. One feed handle is broken off (motor side). It ran like it should and cut as good as I would expect for the capabilities of a machine this size. If you have any questions please shoot me a message, just do not wait until last minute and expect me to get back to you in time. This item is for sale locally and I reserve the right to cancel this listing at any time. The item “Atlas MFC Mill Horizontal Milling Machine Machinist Tool Bench Top” is in sale since Friday, February 16, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “zwmcquig” and is located in Yorktown, Virginia. This item can be shipped to United States.

• Brand: Atlas
• Model: Horizontal Milling Machine
• Country/Region of Manufacture: United States

Tested working Atlas horizontal milling machine in used condition. This is a nice compact bench top milling machine typically used by gunsmiths, model engine and train enthusiasts, hobby/home machinist, and sometimes found in machine shops being use as a keyway cutting machine. These machines work great for what they were intended to do, and as long as you do not need something in a hurry and try to overwork it, it should last a long while. The previous owner painted it a green color and that paint is flaking off, leaving behind some of the original grey. Comes with 7/8 arbor, small vise, and a few cutters. I have owned a few of these over the years and used this mill for about 4 hours and just want to be thorough in my listing and tell you everything that I noticed, I may not have seen everything but I did do a somewhat thorough investigation into its condition. The side belt cover is there but the swivel ears are repaired and may continue to hold but they may not. The side belt cover needs to have a latch of some sort as it will move in towards the belt during operation. The top belt cover has a crack at the one corner, it does not seem to affect anything but want to tell you it’s there. The powerfeed direction lever was repaired at some point and worked as it should while I was using it. The feeds do have some play as with most of these mills you will find. The drawbar is not original but seems to work like it should. The mid plate has a broken corner(see one of the pics with finger pointing). There are a couple knobs/handles that have been replaced by a shop found item. One feed handle is broken off (motor side). It ran like it should and cut as good as I would expect for the capabilities of a machine this size. If you have any questions please shoot me a message, just do not wait until last minute and expect me to get back to you in time. This item is for sale locally and I reserve the right to cancel this listing at any time. The item “Atlas MFC Mill Horizontal Milling Machine Machinist Tool Bench Top” is in sale since Monday, January 15, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “zwmcquig” and is located in Yorktown, Virginia. This item can be shipped to United States.

• Brand: Atlas
• Model: Horizontal Milling Machine
• Country/Region of Manufacture: United States

This is an Atlas 3 swivel milling vise, factory vise for an Atlas horizontal milling machine. The tab is cut off one end (see last photo), no effect when used with the base, otherwise very nice shape. The item “Atlas Milling Machine 3 swivel Vise” is in sale since Sunday, January 14, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “usefulstuf” and is located in Warrington, Pennsylvania. This item can be shipped to United States.

• Brand: Atlas
• MPN: Does Not Apply
• Model: MFC

THIS MILLING MACHINE IS A HORIZONTAL MILLING MACHINE WITH A MARVIN VERTICLE HEAD ATTACHMENT. MACHINE IS ALL MANUAL X-Y-Z AXIS. THE TABLE CAN FEED HORIZONTAL BY USING THE HORIZONTAL CRANK DIAL HANDLE. THE TABLE CAN CONVERT TO A RACK AND PINYON LEVER ACTION PRODUCTION FEED TABLE BY REMOVING THE HORIZONTAL FEED SCREW. MACHINE IS IN GOOD RUNNING CONDITION. The item “ATLAS MILLING MACHINE WITH MARVIN VERTICLE HEAD RACK&PINYON ADVANCE” is in sale since Thursday, December 28, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “wash2034″ and is located in Neptune, New Jersey. This item can’t be shipped, the buyer must pick up the item.