Tested working Atlas horizontal milling machine in used condition. This is a nice compact bench top milling machine typically used by gunsmiths, model engine and train enthusiasts, hobby/home machinist, and sometimes found in machine shops being use as a keyway cutting machine. These machines work great for what they were intended to do, and as long as you do not need something in a hurry and try to overwork it, it should last a long while. The previous owner painted it a green color and that paint is flaking off, leaving behind some of the original grey. Comes with 7/8 arbor, small vise, and a few cutters. I have owned a few of these over the years and used this mill for about 4 hours and just want to be thorough in my listing and tell you everything that I noticed, I may not have seen everything but I did do a somewhat thorough investigation into its condition. The side belt cover is there but the swivel ears are repaired and may continue to hold but they may not. The side belt cover needs to have a latch of some sort as it will move in towards the belt during operation. The top belt cover has a crack at the one corner, it does not seem to affect anything but want to tell you it’s there. The powerfeed direction lever was repaired at some point and worked as it should while I was using it. The feeds do have some play as with most of these mills you will find. The drawbar is not original but seems to work like it should. The mid plate has a broken corner(see one of the pics with finger pointing). There are a couple knobs/handles that have been replaced by a shop found item. One feed handle is broken off (motor side). It ran like it should and cut as good as I would expect for the capabilities of a machine this size. If you have any questions please shoot me a message, just do not wait until last minute and expect me to get back to you in time. This item is for sale locally and I reserve the right to cancel this listing at any time. The item “Atlas MFC Mill Horizontal Milling Machine Machinist Tool Bench Top” is in sale since Saturday, December 16, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “zwmcquig” and is located in Yorktown, Virginia. This item can be shipped to United States.

• Brand: Atlas
• Model: Horizontal Milling Machine
• Country/Region of Manufacture: United States

Excellent condition – Original Unrestored Atlas Milling Machine. This unit basically sat in dry storage most of its life. It retains its original paint and badging, which are in exceptional condition. All knobs have excellent finish. Just a gorgeous unmolested original. Everything works as it should. Extremely difficult to find one with such little use. Estimated weight is 300 pounds, crate estimated measurements, 3′ x 3′ x 3′. The item “EXCELLENT UNRESTORED ORIGINAL ATLAS MILLING MACHINE WILL SHIP” is in sale since Tuesday, December 19, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “antfarm200″ and is located in Danville, New Hampshire. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas
• MPN: Does Not Apply
• Country/Region of Manufacture: United States
• Model: MFB

Up for sale is an Atlas MF (original model, low serial number) bench top horizontal mill in used but working condition. A nice lot of 19 7/8″ diameter bore cutters is included along with the original 7/8″ arbor and draw bar. An aftermarket vise is included; it has a swivel base which is included but not currently attached. A chip tray and Steel Age two drawer cabinet with wood top is included. The item “Atlas MF Horizontal Milling Mill Machine Machinist Bench Top 19 7/8 Cutters” is in sale since Monday, December 11, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “rebellsu” and is located in Baton Rouge, Louisiana. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas
• Model: MF Horizontal Milling Machine
• Country/Region of Manufacture: United States

Tested working Atlas horizontal milling machine in used condition. This is a nice compact bench top milling machine typically used by gunsmiths, model engine and train enthusiasts, hobby/home machinist, and sometimes found in machine shops being use as a keyway cutting machine. These machines work great for what they were intended to do, and as long as you do not need something in a hurry and try to overwork it, it should last a long while. The previous owner painted it a green color and that paint is flaking off, leaving behind some of the original grey. Comes with 7/8 arbor, small vise, and a few cutters. I have owned a few of these over the years and used this mill for about 4 hours and just want to be thorough in my listing and tell you everything that I noticed, I may not have seen everything but I did do a somewhat thorough investigation into its condition. The side belt cover is there but the swivel ears are repaired and may continue to hold but they may not. The side belt cover needs to have a latch of some sort as it will move in towards the belt during operation. The top belt cover has a crack at the one corner, it does not seem to affect anything but want to tell you it’s there. The powerfeed direction lever was repaired at some point and worked as it should while I was using it. The feeds do have some play as with most of these mills you will find. The drawbar is not original but seems to work like it should. The mid plate has a broken corner(see one of the pics with finger pointing). There are a couple knobs/handles that have been replaced by a shop found item. One feed handle is broken off (motor side). It ran like it should and cut as good as I would expect for the capabilities of a machine this size. If you have any questions please shoot me a message, just do not wait until last minute and expect me to get back to you in time. This item is for sale locally and I reserve the right to cancel this listing at any time. The item “Atlas MFC Mill Horizontal Milling Machine Machinist Tool Bench Top” is in sale since Wednesday, November 15, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “zwmcquig” and is located in Yorktown, Virginia. This item can be shipped to United States.

• Brand: Atlas
• Model: Horizontal Milling Machine
• Country/Region of Manufacture: United States

This was my dads to old to play with these , anyway all ORIGINAL Atlas shaper Model 7B & factory metal stand, the wood side doors are not but can be taken off not welded on. Also a Sears-Roebuck drill press. I don’t have the vices. Machines can be seen running by appointment. I will load as I have a forklift. The item “ATLAS SHAPER 7B Craftsman Drill press” is in sale since Friday, November 03, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “greermach” and is located in Huntington Beach, California. This item can’t be shipped, the buyer must pick up the item.

THIS MILLING MACHINE IS A HORIZONTAL MILLING MACHINE WITH A MARVIN VERTICLE HEAD ATTACHMENT. MACHINE IS ALL MANUAL X-Y-Z AXIS. THE TABLE CAN FEED HORIZONTAL BY USING THE HORIZONTAL CRANK DIAL HANDLE. THE TABLE CAN CONVERT TO A RACK AND PINYON LEVER ACTION PRODUCTION FEED TABLE BY REMOVING THE HORIZONTAL FEED SCREW. MACHINE IS IN GOOD RUNNING CONDITION. The item “ATLAS MILLING MACHINE WITH MARVIN VERTICLE HEAD RACK&PINYON ADVANCE” is in sale since Wednesday, November 15, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “wash2034″ and is located in Neptune, New Jersey. This item can’t be shipped, the buyer must pick up the item.

Excellent condition – Original Unrestored Atlas Milling Machine. This unit basically sat in dry storage most of its life. It retains its original paint and badging, which are in exceptional condition. All knobs have excellent finish. Just a gorgeous unmolested original. Everything works as it should. Extremely difficult to find one with such little use. Estimated weight is 300 pounds, crate estimated measurements, 3′ x 3′ x 3′. The item “EXCELLENT UNRESTORED ORIGINAL ATLAS MILLING MACHINE WILL SHIP” is in sale since Sunday, November 19, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “antfarm200″ and is located in Northeast. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas
• MPN: Does Not Apply
• Country/Region of Manufacture: United States
• Model: MFB

Offering a used Atlas mod. 7B shaper/mill in good working condition, 110V, single phase, on original stand and vise. Unit exhibits the normal wear of a used machine of it’s age. Nevertheless, see pictures for best description. The item “ATLAS 7B SHAPER” is in sale since Wednesday, November 08, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “dsharon7872″ and is located in Rush, New York. This item can’t be shipped, the buyer must pick up the item.

• Brand: Atlas
• Model: 7B
• Country/Region of Manufacture: United States

THIS MILLING MACHINE IS A HORIZONTAL MILLING MACHINE WITH A MARVIN VERTICLE HEAD ATTACHMENT. MACHINE IS ALL MANUAL X-Y-Z AXIS. THE TABLE CAN FEED HORIZONTAL BY USING THE HORIZONTAL CRANK DIAL HANDLE. THE TABLE CAN CONVERT TO A RACK AND PINYON LEVER ACTION PRODUCTION FEED TABLE BY REMOVING THE HORIZONTAL FEED SCREW. MACHINE IS IN GOOD RUNNING CONDITION. The item “ATLAS MILLING MACHINE WITH MARVIN VERTICLE HEAD” is in sale since Wednesday, November 01, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “wash2034″ and is located in Neptune, New Jersey. This item can’t be shipped, the buyer must pick up the item.

Tested working Atlas horizontal milling machine in used condition. This is a nice compact bench top milling machine typically used by gunsmiths, model engine and train enthusiasts, hobby/home machinist, and sometimes found in machine shops being use as a keyway cutting machine. These machines work great for what they were intended to do, and as long as you do not need something in a hurry and try to overwork it, it should last a long while. The previous owner painted it a green color and that paint is flaking off, leaving behind some of the original grey. Comes with 7/8 arbor, small vise, and a few cutters. I have owned a few of these over the years and used this mill for about 4 hours and just want to be thorough in my listing and tell you everything that I noticed, I may not have seen everything but I did do a somewhat thorough investigation into its condition. The side belt cover is there but the swivel ears are repaired and may continue to hold but they may not. The side belt cover needs to have a latch of some sort as it will move in towards the belt during operation. The top belt cover has a crack at the one corner, it does not seem to affect anything but want to tell you it’s there. The powerfeed direction lever was repaired at some point and worked as it should while I was using it. The feeds do have some play as with most of these mills you will find. The drawbar is not original but seems to work like it should. The mid plate has a broken corner(see one of the pics with finger pointing). There are a couple knobs/handles that have been replaced by a shop found item. One feed handle is broken off (motor side). It ran like it should and cut as good as I would expect for the capabilities of a machine this size. If you have any questions please shoot me a message, just do not wait until last minute and expect me to get back to you in time. This item is for sale locally and I reserve the right to cancel this listing at any time. The item “Atlas MFC Mill Horizontal Milling Machine Machinist Tool Bench Top” is in sale since Sunday, October 15, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “zwmcquig” and is located in Yorktown, Virginia. This item can be shipped to United States.

• Brand: Atlas
• Model: Horizontal Milling Machine
• Country/Region of Manufacture: United States