We will assist you in any reasonable way to help get your items to your destination, Thank You. All products are as is. I shall have no other obligation or liability, direct or indirect, of any kind, including liability for special, incidental, or consequential damages. This item is for sale locally and may end at anytime. The item “Clausing Vertical Milling Machine Base, Column, Knee and Saddle” is in sale since Tuesday, February 28, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “guerreramachinecompanyllc” and is located in Watertown, Connecticut. This item can be shipped to United States.

• Brand: Unbranded/Generic
• MPN: Does Not Apply

Northern Tool Item# 426419. 24 months limited parts / No labor. The SHOP FOX® Deluxe Milling Machine is fortified with a quick-tilt headstock for horizontal milling, 1 HP brushless motor, a multi-function digital depth scale on the quill, push-button speed control and digital spindle tachometer. The quick reversing tapping feature also makes hole threading simple. Just put the machine in “tapping mode, ” start the tap, and when the thread is completed, push the button at the end of the rack levers and the spindle reverses, immediately withdrawing the tap from the hole. The back-lit digital tachometer tells you the precise spindle speed for matching tooling and material. Draw Bar: 7/16 in. X 20 TPI, Drilling Capacity in. : 1, Dimensions L x W x H in. : 27 x 30 x 33 3/4, Stand Included: No, Volts: 220, Worktable L x W in. : 6 1/4 x 21 5/8, Max. : 14 3/4, HP: 1, Light Included: No, Chuck Size in. : R8, Speed (RPM): 3,500, Swing: 18 in. Digital spindle scale reads metric or inches, zero set, on/off. Back-lit digital speed display. Reversing buttons on the rack handles for tapping. Front-mounted fine feed knob. Push-button motor control for forward, reverse, tapping and off. See-through chip guard with safety switch. Brushless DC motor w/ step-up transformer, 110V operation. Spindle travel: 2 7/8in. Distance spindle to table: 14 3/4in. X and Y handwheel calibration: 0.001in. Z handwheel calibration: 0.005in. Table size: 6 1/4in. Table travel (longitudinal): 15 7/8in. Table travel (cross): 5 3/4in. Headstock travel: 14 7/8in. Face cutter diameter: 2in. Variable speed: 100 – 1750 RPM. We may already have an answer to your question! We reserve the right to correct ad errors and/or omissions. Pricing and availability is subject to change without notice. The item “FREE SHIPPING-SHOP FOX Deluxe Milling Machine withDovetail Column #M1111″ is in sale since Saturday, November 02, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “northerntool” and is located in Fort Mill, South Carolina. This item can be shipped to United States.

• Brand: Shop Fox
• MPN: M1111
• Manufacturer: Shop Fox
• Product Weight: 416
• Model Number: M1111

Use for Parts or acquire a head and use as a milling machine. 9″ x 36″ Table. See pics for what is included. The item “Bridgeport Mill Column, Base Only WithRam” is in sale since Saturday, April 01, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “colcord532″ and is located in Victor, New York. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport
• Country/Region of Manufacture: United States

Sherline mini mill XY base for the milling column. Adjustable (zero) hand wheels, both adjust properly, unit needs a good cleaning before use. Base measures approximately 5 1/8″ x 12″ and table is 2 3/4″ x 8″ size. Secondhand tool expect general wear, oil stains, screw marks from age & use — Check Out The Pictures. Ask questions before purchasing. Check out my other auctions this week, Thank You. The item “Sherline Mini Mill XY Table Base Tool Adjustable Hand Wheels for Milling Column” is in sale since Sunday, September 11, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “second_hand_treasures_2″ and is located in Valparaiso, Indiana. This item can be shipped to United States, to Canada.

• Brand: Sherline
• MPN: n/a
• Country/Region of Manufacture: United States
• Model: Mini Mill XY Base

Im keeping the FP42NC and this one is up for sale. The “L” series machines are amazing prototype machines. Perfect for those unusual jobs that no other machine will handle. Machine works perfectly, you can see it below in referenced mode. Spindles are tight and quiet. 3 width in steel below, no chatter! Ways are perfect, with no apparent wear. Buyers are welcome to check the machine out in person at my shop where it is wired to power. This a traveling column machine with glass scales. It has a cutting area of 31″ in X by 15″ in Y and 15 in Z. You wont find another CNC machine with this size envelope anywhere for the footprint. Glass scales make this unit very accurate, you could probably use it as a CMM in a pinch. This machine has a large working surface and a t-slots on the front of the table allowing for overhanging work. The table can be mounted on the next set of T slots for additional headspace. Table can be removed for mounting other angle plates or angle/rotary tables. Mounting face is 45 degrees with 90mm t slot spacing. The upper spindle assembly is on a dovetail so it can be moved forward for extra travel. Factory coolant pump and tank along with (1) Deckel coolant hose assembly with adjustable valve. The control is a Dialog 3 and has RS232 input for loading and sending programs from a PC. It has 24K of memory. Electronic handwheel pictured is included. The control enclosure has an integral 440 to 380 transformer. It has a 2500 RPM horizontal and vertical spindle All three NiCAD Batteries packs in the Control and the PLC are newly replaced. I will also provide a working post processor for this machine. The control monitor can be easily converted to LCD. The Y axis glass scale has the newer green plastic dust seals but you will need to replace the seals on the Z and X axis as they are worn out. (X is less important as its hard to get any contamination up there due to the way its mounted). These seals are available from Heidenhain in bulk rolls and are pretty easy to change. I will include printed photo illustrated instructions on how to change the seals out and clean the glass scales. NEW flexible wire bundle protective tubing is installed. I guarantee that the machine is in good mechanical condition, and that the Dialog 3 CNC control, and all cards in the PC1 PLC and the Siemens SIMOREG Servo amp are in good working condition. European buyers are welcome. _gsrx_vers_526 GS 6.6.6 (526). The item “Deckel FP41NC L Traveling Column CNC Milling Machine with Dialog 3 Control” is in sale since Tuesday, August 09, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “srlsales” and is located in Petaluma, California. This item can be shipped to United States.

Im keeping the FP42NC and this one is up for sale. The “L” series machines are amazing prototype machines. Perfect for those unusual jobs that no other machine will handle. Machine works perfectly, you can see it below in referenced mode. Spindles are tight and quiet. Ways are perfect, with no apparent wear. Buyers are welcome to check the machine out in person at my shop where it is wired to power. This a traveling column machine with glass scales. It has a cutting area of 31″ in X by 16.5″ in Y abd 16.5 in Z. You wont find another CNC machine with this size envelope anywhere for the footprint. Glass scales make this unit very accurate, you could probably use it as a CMM in a pinch. This machine has a large working surface and a t-slots on the front of the table allowing for overhanging work. The upper spindle assembly is on a dovetail so it can be moved forward for extra travel. Factory coolant pump is included along with (1) Deckel Coolant hose assembly with adjustable valve. The control is a Dialog 3 and has RS232 input for loading and sending programs from a PC. It has 24K of memory. The control enclosure has an integral 440 to 380 transformer. It has a 3100 RPM horizontal and vertical spindle All three NiCAD Batteries in the Control and the PLC are newly replaced. I will also provide a working post processor for this machine. The Y axis glass scale has the never green plastic dust seals but you will need to replace the seals on the Z and X axis as they are worn out. (X is less important as its hard to get any contamination up there due to the way its mounted). Thse seals are available from Heidenhahn in bulk and are pretty easy to change. I will include printed photo illustrated instructions on how to change the seals out and clean the glass scales. NEW flexible wire bundle protective tubing is installed. I guarantee that the machine is in good mechanical condition, and that and the Dialog 3 CNC control and all cards in the PC1 PLC and the Siemens SIMOREG Servo amp arein good working condition. Interested buyers are welcome to drop over and operate the unit or bring cad files over and see the machine load files and cut metal. European buyers are welcome. _gsrx_vers_526 GS 6.6.6 (526). The item “Deckel FP41NC L Traveling Column CNC Milling Machine with Dialog 3 Control” is in sale since Monday, June 13, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “srlsales” and is located in Petaluma, California. This item can be shipped to United States.

This item was removed from a working Sherline CNC machine. The lead screw and nut have some wear from use. Comes complete with Stepper motor mount, keystock for locating head and mounting screws. Please have a look at my other Sherline Mill items and Industrial items up for sale. The free listing tool. The item “SHERLINE MILL CNC 5400 MILL BED COLUMN Z AXIS COMPLETE WITH STEPPER MOTOR MOUNT” is in sale since Wednesday, November 04, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “artcase” and is located in Erlanger, Kentucky. This item can be shipped to United States.

BRAND NEW REPLACEMENT FOR YOUR BRIDGEPORT MACHINE. THIS MAY BE OVERSIZED. NO GROOVES OR FLAKING FOR OIL BUT MAIN SURFACE IS GROUND. THIS IS NOTCHED BUT A NEW NOTCH MAY NEED TO BE CUT WHICH IS NOT UNCOMMON IN FITTING. BECAUSE ALL MACHINES WEAR DIFFERENTLY, THERE WILL BE SOME FITTING INVOLVED. ACTUALLY MEANT FOR REBUILDERS, BUT ALSO AVAILABLE FOR THOSE WHO ARE WILLING TO TACKLE THIS JOB. CAN’T ACCEPT A RETURN THAT HAS BEEN ALTERED. THANKS FOR LOOKING AND DON’T FORGET THE OTHER QUALITY BRIDGEPORT PRODUCTS IN THIS STORE, SUCH AS REPAIR KITS, REPLACEMENT PULLEYS, AND CLOCK SPRINGS. LOOKING FOR A PART? DON’T SEE IT? WE STOCK 95% OF WHAT IS NEEDED FOR THE SERIES 1 J HEAD BRIDGEPORT. We guarantee the items are exactly as said in description. Appreciates your business very much. The free listing tool. The item “BRIDGEPORT MILL PART, J HEAD MILLING MACHINE KNEE COLUMN GIB 2060146 M1158 NEW” is in sale since Wednesday, September 18, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mataco1″ and is located in Broadview Heights, Ohio. This item can be shipped to North, South, or Latin America, to all countries in Europe, to Australia.

• Brand: Bridgeport
• Model: M1158
• MPN: 2060146
• MILLING MACHINE: KNEE/COLUMN GIB