Bridgeport Series 1 Milling Machine. 1983 Serial #12 BR 233125. 48″ x 9″ Table. Power Feeds and Power Quill Attachments. 480 Volt / 3 Phase / 30 Amps. Allen Bradley Safety Switch. Used, Item removed from a working Machine Shop. It appears in Very Good Condition but Untested in application. Our Reference # S170209-50. The item “1983 Bridgeport Milling Machine with Sakki Controls, Power Feeds & Quill Control” is in sale since Wednesday, February 15, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “srssurplus” and is located in Holly Hill, South Carolina. This item can be shipped to United States.

• Brand: Bridgeport

Older mill, comes with tooling, vise, clamp kit, and program storage drive with a few cartridges. Not sure if the storage drive works. The owner before us wasn’t able to make it work and we’ve never tried. So expect it not to… The head makes a little noise. I think it’s in the belt drive, not sure though. We have a forktruck to help load it. We’re closing our business and need to be out of the building as soon as we can… Also, your welcome to come by and see it if you’d like.. I’ve had a few people ask if we have anything else for sale. There are a few items left that I have listed under my personal act. The item “Supermax (Bridgeport clone) CNC Mill with Anilam Crusader II Controls” is in sale since Wednesday, February 15, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “apex_sys” and is located in Muncie, Indiana. This item can’t be shipped, the buyer must pick up the item.

• Brand: Unbranded/Generic

Seiki 4VS 2 axis. The item “Seiki 4VS- 2 axis Mill with Anilam Controls” is in sale since Sunday, November 13, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “terryyinger.sms2012″ and is located in Hamilton, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Brand: Seiki
• MPN: Does Not Apply
• Country/Region of Manufacture: United States

Here is a Pratt Whitney Fanuc Tape Drill Mate Model T vertical machining center with Fanuc OM controls. It is under power and can be demonstrated if you want to come see it. I try to represent the condition the best that I can. The item “Pratt Whitney Fanuc Tape Drill Mate Model T, Fanuc OM controls, CNC mill, VMC” is in sale since Monday, December 14, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “9warren9″ and is located in Oxford, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

PREOWNED AMURA SEIKI 10″ X 50″ 3 AXIS CNC MILLING MACHINE / BED MILL. 5 HP / 220 V / 3 PHASE MOTOR. WE RECENTLY REBULT THE HEAD AND HAVE GONE THROUGH THE SERVOS AND THE ENTIRE ELECTRICAL SYSTEM!! THIS MILL IS IN NEAR PERFECT CONDITION. THE MILL IS UNDER POWER FOR YOUR INSPECTION. SEE A DEMO OF THIS MILL IN ACTION!!! ARE YOU LOOKING FOR A PART OR TOOLING FOR YOUR METAL FABRICATION MACHINE? IS YOUR MACHINE NOISY? JUST NEED SOME ADVISE? CALL DAN’S MACHINE TOOL, INC. (714) 666 – 1266. WE SELL MOST BRIDGEPORT MILL PARTS (VARI SPEED & STEP PULLEY). CLOCK/QUILL SPRINGS, HANDLES, BELTS, BEARINGS, KNOBS, HANDWHEELS, SWITCHES, HUBS, PULLEYS, WIPERS, NUTS, BOLTS, DRAWBARS, REPAIR KITS: 1 1/2HP, 2 HP STEP PULLEY AND OR VARI SPEED. IF YOU NEED A HARD TO FIND PART CALL DAN’S MACHINE TOOL, INC. OVER 30 YRS OF REPAIR AND REBUILDING EXPERIENCE ON ALL METAL WORKING MACHINERY INCLUDING BUT NOT LIMITED TO. ACRA, BRIDGEPORT, CINCINNATI, HARDINGE, LAGUN, LE BLOND, KENT, SCOTCHMAN. DAN’S MACHINE TOOL, INC. SPECIALIZES IN REPAIR & REBUILD, NEW & USED TOOLING, SALES OF NEW AND PREOWNED MACHINES, MANY IN STOCK: MILLS, LATHES, GRINDERS, BANDSAWS, IRONWORKERS. The item “Amura Seiki 10 x 50 3 AXIS CNC MILLING MACHINE / WITH FAGOR CONTROLS” is in sale since Wednesday, April 13, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qjen1″ and is located in Anaheim, California. This item can’t be shipped, the buyer must pick up the item.

• Brand: AMURA
• Model: SEIKI

PREOWNED AMURA SEIKI 10″ X 50″ 3 AXIS CNC MILLING MACHINE / BED MILL. 5 HP / 220 V / 3 PHASE MOTOR. WE RECENTLY REBULT THE HEAD AND HAVE GONE THROUGH THE SERVOS AND THE ENTIRE ELECTRICAL SYSTEM!! THIS MILL IS IN NEAR PERFECT CONDITION. THE MILL IS UNDER POWER FOR YOUR INSPECTION. SEE A DEMO OF THIS MILL IN ACTION!!! ARE YOU LOOKING FOR A PART OR TOOLING FOR YOUR METAL FABRICATION MACHINE? IS YOUR MACHINE NOISY? JUST NEED SOME ADVISE? CALL DAN’S MACHINE TOOL, INC. (714) 666 – 1266. WE SELL MOST BRIDGEPORT MILL PARTS (VARI SPEED & STEP PULLEY). CLOCK/QUILL SPRINGS, HANDLES, BELTS, BEARINGS, KNOBS, HANDWHEELS, SWITCHES, HUBS, PULLEYS, WIPERS, NUTS, BOLTS, DRAWBARS, REPAIR KITS: 1 1/2HP, 2 HP STEP PULLEY AND OR VARI SPEED. IF YOU NEED A HARD TO FIND PART CALL DAN’S MACHINE TOOL, INC. OVER 30 YRS OF REPAIR AND REBUILDING EXPERIENCE ON ALL METAL WORKING MACHINERY INCLUDING BUT NOT LIMITED TO. ACRA, BRIDGEPORT, CINCINNATI, HARDINGE, LAGUN, LE BLOND, KENT, SCOTCHMAN. DAN’S MACHINE TOOL, INC. SPECIALIZES IN REPAIR & REBUILD, NEW & USED TOOLING, SALES OF NEW AND PREOWNED MACHINES, MANY IN STOCK: MILLS, LATHES, GRINDERS, BANDSAWS, IRONWORKERS. The item “Amura Seiki 10 x 50 3 AXIS CNC MILLING MACHINE / WITH FAGOR CONTROLS” is in sale since Monday, January 11, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qjen1″ and is located in Anaheim, California. This item can’t be shipped, the buyer must pick up the item.

• Brand: AMURA
• Model: SEIKI

W/ PROTO TRAK A. Up for sale is a Sharp VH25 Milling machine with a Proto Trak A. 2 2-Axis CNC control modification. This Sharp mill is in good running and operating condition. This mill can be used as a vertical or horizontal milling machine. It features a Proto Trak 2-Axis CNC control, a 10 x 56 table, and travels of 16.5 x 36. This model is still a current knee mill model from Sharp. This machine requires three phase power to operate. 16.5 X 36. Please do NOT pay until you are invoiced! Unless we receive a valid resale card. Aragon, LLC a service charge for each item we list. UPS only handles up to a maximum of 150 lbs. Wood crating and palletizing charges will be determined according to the size of the item. The following is the policy of Gary S. We regret that this policy must be put into place. It is required due to limited storage available at our facility. Items are subject to re-listing immediately upon forfeiture. Other than whats displayed in the images accompanying this listing, or mentioned in the description above, there are no manuals, instructions, additional parts or accessories. Unless otherwise stated in the description, the images show the actual , or an accurate representation of the item for sale. All images are photographed by us and are the exclusive property of Gary S. The description is written to the best of our knowledge, but is NOT guaranteed to be 100% accurate. Use of any material in this advertising is prohibited without express written permission from Gary S. The item “Sharp VH25 Horizontal Vertical Knee Mill with Proto Trak A. G. E 2-Axis CNC Controls” is in sale since Friday, July 17, 2015. This item is in the category “Business & Industrial\Heavy Equipment\Milling Machines”. The seller is “gary-aragon” and is located in San Leandro, California. This item can be shipped to United States.

NEW- ACER 1050 Series BED MILL w/FAGOR 3 AXIS CNC CONTROLS. BRAND NEWACER 1050 SERIES CNC BED MILL. Manual Conversational G-Code CNC 3 Axis with Graphics and Help Screens. Proven Acer E-Mill Head Standard with over 30,000 installed since 1996. 5HP Variable Speed, 0 to 3650 RPM, Toshiba Vector Drive & Inverter Motor. Machine Can Run on 220V Single or Three Phase Power (440V Optional). Large – Extra Large Travels, in X- 28″ Y- 20″, Z – 21″ and 24″ Centerline of Spindle to Machine Column accommodates Large Work Pieces. Efficient and Easy Machine Set-Up with Full Manual or CNC Operation under 25.5 of Spindle Nose to Table makes Machining Tall Parts Easy. The Bed Mill includes a Heady Duty CAT-40 Taper spindle, Auto Lubrication, Dual “E” Stops, USB Port and a Large Grapic Display Panel. Weight & Certified Meehanite Casting which Provides Vibration Free and Precise Milling. Reliable & Popular Fagor 8055i 3 Axis Conversational or G / M Code Control Offer User Versatility Manual, Or CNC and is CAD /CAM Compatible. Precision harden and ground w/Turcite B Way. ACER E-mill Mini Bedtype Milling Machine. / A-MC 3 or 4-Axis CNC Control. C5 Ball Screws and Double-End Thrust Bearing Set. ULTRA HIGH QUALITY ACER E. 5 HP Spindle Inverter Motor. Infinite 50 – 3,750. Speed AC Frequency Drive. 52 Hardened and Ground Table. Turcite-B Coated Slideway and Gibs. Precision Spindle w/ ABEC-7 Bearings. Rugged 10″ x 50″ Table Size (10″ x 54″ option). 1-1/4 Diameter Ball Screws with Casted Mounting Brackets. Hardened & Ground X, Y, & Z Table Top and Bottom. X, Y, Z Travel: 27.5″ x 20″ x 20.87″ on Bed-mill 1050 (31.5″ x 20″ x 20.87″on Bed-mill 1054). CAT #40 Taper Spindle. Class 7 Precision Spindle Bearings. Precision 4? Û Diameter Hard Chromed Quill at. Turcite-B Lining Saddle Ways. To Reduce Slide-Way Wear. Load on Table is 1,320 lbs. Machine Weight: 4,609 lbs. On Bed-mill 1050 4,758 lbs. Interactive ICON based conversational programming system. One screen? ÛÓOne Operation, Fill in the blanks & press cycle to start. No Limit to the number of programs in memory! Built-In Mini CAD/CAM system. 11 Color TFT LCD screen. Numerous Canned Cycles in Conversational and G-code. AC Brushless Servo Motors & Drives. Full CNC package includes Ball Screws and Motor Brackets for all axes. / A-MC CNC? Ûªs give you 4-axis capability out of the box. Supra CNC-Bedtype w/ 3-Axis FAGOR 8055. Bed-mill 1050 w/ 8055 3-Axis CNC Control. (10″ x 50″ Table). Bed-mill 1054 w/ 8055 3-Axis CNC Control. (10″ x 54″ Table). Supra CNC-Bedtype w/ 4-Axis FAGOR 8055. Bed-mill 1050 w/ 8055 4-Axis CNC Control. Bed-mill 1054 w/ 8055 4-Axis CNC Control. (10 x 54 Table). Above Prices are based on Port of Entry. Prices and designs are subject to change without notice. Please donot payuntil you have received the invoice. Payments by check will be held up to 4daysuntil the check clears. We canship byLTL, partial or full, van or flatbed, double drop, or export container. Please contact a salesrepresentative for a shippingquote. Items lessthan 100 lbs. Any item not picked up within 30 days from the end of anauctionwill be charged 10% of item(s) cost per month for storage. We will do ourbest toanswer specific questions but please be aware that the equipment may nolongerbe located within the original facility and historical information andphotosmay be limited. The item “- ACER BED MILL withFAGOR 3 AXIS CNC CONTROLS” is in sale since Friday, March 22, 2013. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “globalmachines” and is located in Watertown, Connecticut. This item can be shipped worldwide.

SHARNOA SGC 30 Vertical Machining Center. It is in working condition but may need some minor repairs to get rolling 100%. I noticed things like a cracked air line or leaky regulator. We were able to fire it up and send it a program. See videos below of the machine running. The item “SHARNOA SGC-30 CNC VERTICAL MACHINING CENTER TIGER CONTROLS MILL” is in sale since Thursday, October 15, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “machineliquidators” and is located in Walled Lake, Michigan. This item can be shipped to United States, to Canada.