Deckel 3Dimensional Engraving/Pantograph Machine. Model GK 21, S/N 4600/4777. Work Table 7-7/8 x 14-1/8. Copy Table 12-1/2 x 20-1/2. Spindle Speeds 475 – 20.000 RPM. 55 220 Volt 3Phase. Inspect Under Power in Our Lebanon NJ warehouse. The item “Deckel 3Dimensional Engraving/Pantograph Machine, Model GK 21″ is in sale since Thursday, April 02, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mfmachinery” and is located in Somerville, New Jersey. This item can be shipped to North, South, or Latin America, to United Kingdom, to Germany, to Japan, to Australia.

• Country/Region of Manufacture: Germany
• Brand: Deckel
• Model: GK 21

For sale: Deckel-FP3-NC 4 axis with Dialog 2 Control. Has NC-T400 20 rotary table. Horizontal & Vertical spindles. 220 volts 3 phase power. Travels are X 16 Y 13 Z 16. Portable hand Box, complete splash guard, coolant pump. 40 taper spindles with hydraulic tool retention. Was previously used in an electronics lab. Needs vertical spindle bearings. Have operators manual, service information manual, spare parts manual and electrical. The item “Deckel FP3-NC Universal Milling Machine” is in sale since Wednesday, August 26, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “avdbfromholland” and is located in Danville, New Hampshire. This item can be shipped to United States.

This is a Deckel pantograph engraving machine in very good working condition. This machine runs on 120V house current. The machine comes with a set of letter and number fonts, engraving bits, tools and a manual. The machine has a moveable base that makes it easy to move about the shop. The machine weighs about 400 pounds and can be loaded on a low trailer with ramps. I’ll be happy to answer your questions and supply additional photos if needed. Thanks for looking and good luck. The item “Deckel Engraving Machine G1F” is in sale since Monday, August 10, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “danstonex” and is located in Round Lake, Illinois. This item can’t be shipped, the buyer must pick up the item.

Original deckel fp1 collets U2 20X2 square. I sincerely appreciate Your interest. Additional photos can always be provided upon request. The item “Original Deckel Fp1 Collets U2 20X2 square” is in sale since Sunday, July 26, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mouwes123″ and is located in haifa. This item can be shipped worldwide.

• Country/Region of Manufacture: Germany

This machine has a single phase motor on the vertical spindle, the original three phase motor is included in the sale. I have not operated the horizontal spindle, but it looks operational, however I believe the horizontal spindle motor is still three phase. The tooling cabinet shown is the original Deckel issued cabinet. Most if the original tooling is still with the machine, this is one of the most complete and original Deckels I have seen. The item “Deckel FP1 milling machine” is in sale since Thursday, July 02, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “ozmo022″ and is located in Amsterdam, New York. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: Germany
• Brand: Friedrich Deckel
• Model: FP1
• MPN: 35778

Stock european machine tools. Used deckel maho, used hermle, used mikron. In stock european machine tools. 1x used dmg deckel maho dmu80p 5-axis universal machining center. Single owner machine from a as 9100 & iso 9001 certified aerospace parts producer. Made in pfronten, germany. Mill plus heidenhain / cnc control with electronic hand wheel, sw level with. This is a universal machining center. Meaning it is two machines in one. Both a vertical and horizontal machining center. Head on this machine is automatic and programmable. It can be swiveled in. 5 seconds from vertical to horizontal, and in combination with the rotary. In a single set up possible. Setup time is reduced, the need for multiple setups is eliminated and. Accuracy and precision are improved. The p series machines are intended. For fully automatic manufacturing of highly complex work pieces in a single set up. Ideal for both small and large batches with the high production components. Nc swivel rotary table. Rapid speed rotary axis………….. Rapid speed swivel axis………….. 360 x 0.001 degree (full 4th axis). Swivel angles to spindle -45 degrees, from working spindle +30 degrees. Automatic universal milling head. Automatic swivel from horizontal to vertical in approximately 5 seconds. The auto swivel head makes this machine 2 machines in one because both. Vertical and horizontal machining is possible with one work piece clamping. Together with the nc swivel rotary table 5-sided, 5-axis machining is. Possible with one work piece clamping. Power 40% duty cycle (s3)………… 20 hp (15 kw). Power 100% duty cycle (s1)……….. 13.5 hp (10 kw). Number of gear steps……………. Spindle bearing diameter front……… 0.04-590 ipm (1-15,000 mm/min). 79 ft/min (24 m/min). Ball screw thread x/y/z…… 1.6 x 0.5/1.6 x 0.5/1.6 x 0.5 inch. 30 position tool changer. Chain, horizontal, double gripper. 22 lbs (10 kg). Maximum tool diameter with no neighboring empty pockets. Maximum tool diameter with neighboring empty pockets.. Chip-to-chip time cat40 approximately 7.5 seconds vertical, 12.5 sec horiz. Heidenhain glass scales x/y/z axes direct path measuring system. Heidenhain rotary encoders b/c axes direct path measuring system- input resolution……………. External flood coolant pump on outside of spindle. Pump output external jets flow rate… 5.3 gallon/minute (20 l/min). Fully enclosed protection cabin. Prep for renishaw mp10 infrared parts measuring probe. Coolant tank with coolant pump. Dimensions and weight of machine. 8.0′ l x 10′ w x 8.5′ h. 21,504 lbs (9,754 kg). Fob: open truck emt. Call/ ph: 262-327-0800 or visit us and see this machine under power. Call toll free 855-855-2947 or local 262-327-0800.The item “DMU80P Deckel Maho 5 Axis CNC Machine DMG, DMU80P 5 Axis” is in sale since Monday, January 26, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “europamaschine” and is located in Hartland, Wisconsin. This item can’t be shipped, the buyer must pick up the item.

• Brand: DECKEL MAHO,DMG
• Model: DMU80P 5 Axis CNC Mill-PLUS-HEIDENHAIN

This sale is for one new old stock usa made american sun inc. Usa a small us firm that made the absolute highest quality tools, they were unable to compete with cheap chinese imports and are no longer in business… 1-1/4″ shell end face mill holder with 3/4″ shank. Item 410-4b a top quality tool ! All items are described to the best of my ability and questions are encouraged.

I have no way to know when and if these charges will be applied. And its directors against any damage or penalties associated with: 1. Compliance to current or future laws, rules or regulations pertaining to the use or possession of any equipment device or components, 2.

Any property damage caused directly or indirectly by the use, operation or possession of any equipment, device or component. Machine safety: it is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use, operation or setup, and to adequately safeguard the machine, or machines, to conform to all federal, state and local government safety standards and all industry safety standards. Thank you and good luck. The item “NOS USA AMERICAN SUN 1-1/4 Shell End Mill Holder 3/4 Shank Deckel etc 410-4B” is in sale since Sunday, August 05, 2012. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jrwoodca” and is located in Ontario.

This item can be shipped worldwide.

This sale is for one very nice new old stock american sun inc usa made 2 15 degree indexable shell face mill. The mill came from an industrial supply house that specialized in bridgeport and deckel machines. (american sun was an excellent company that closed due to cheap off shore competition) it takes a 3/4″ shell end mill holder as it has a 3/4″ hole (see our other listings for a beautiful 3/4 shell end mill holders). A beautiful made tool !

Measures 2 in diameter at its maximum. Extra usa made inserts are available for $5 each. All items are described to the best of my ability and questions are encouraged. I have no way to know when and if these charges will be applied. And its directors against any damage or penalties associated with: 1.

Compliance to current or future laws, rules or regulations pertaining to the use or possession of any equipment device or components, 2. Any property damage caused directly or indirectly by the use, operation or possession of any equipment, device or component. Machine safety: it is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use, operation or setup, and to adequately safeguard the machine, or machines, to conform to all federal, state and local government safety standards and all industry safety standards. Thank you and good luck.The item “NOS US AMERICAN SUN 2 Indexable SHELL Face Mill 15 Deg 3/4 Bore, Deckel 753-2″ is in sale since Saturday, March 05, 2011. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”.

The seller is “jrwoodca” and is located in Merrickville, Ontario. This item can be shipped worldwide.