USED KM3 MILLING MACHINE- ELECTRONICS WERE UPDATED BUT STILL USES A TAPE TO INITIALIZE. All tapes and instruction books are included. Also included a circuit board for your computer to upload programs from your programming system. The item “CNC KM3 Hurco Three Axis CNC Milling Bridgeport Mill Machine Shop Tool” is in sale since Monday, January 13, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “abuy4u2014″ and is located in Tallmadge, Ohio. This item can be shipped to United States.

• Modified Item: No
• Country/Region of Manufacture: United States
• Spindle Horsepower: 6 hp
• Machine Type: Knee Mill
• Table Length: 35 in – 39.9 in
• Max Spindle Speed (RPM): 5001 – 7500
• X-Axis Travel Bed: 26 in – 30 in
• Y-Axis Travel Bed: 10 in – 15 in
• Z-Axis Travel Bed: Less than 10 in
• MPN: Does Not Apply
• Function: Drilling
• Brand: Hurco
• Table Width: 15 in – 19.9 in
• Control: CNC
• Voltage: 220 V

COMES WITH TOOLS IN PICTURE. CAN LOAD ON FLAT BED TRUCK. The item “Hurco CNC KMB 1m CNC 3 AXIS MILLING MACHINE” is in sale since Thursday, April 25, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machin3721″ and is located in Fairfield, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Model: KMB 1m
• Brand: Hurco

This machine is in excellent working condition and the spindle was recently rebuilt by Kessler. It has 2.5 arc second encoders on the A and C axes which is much more accurate than the rotary axis on almost any other 5-axis machine or trunnion. We run it on a daily basis making small parts with tight tolerances. We are replacing this machine and our other high speed Hurco 5-axis mill with smaller machines because the parts we make are extremely small and don’t need this much machine or floor space. Service has been done by Hurco out of Indianapolis, IN. X Axis Travel: 30. Z-Axis Travel: 20.5. Table Size: 9.8RD. Max Table Load: 440 LBS. Rapid X, Y: 1771 IPM. Rapid Z: 1575 IPM. Spindle Speed: 18,000 RPM. Spindle Taper: HSK63A (we can provide toolholders with the machine). Max Tool Length: 11.8. Overall Dimensions 155″ x 161″ x 112. Machine Weight: 11,640 LBS. WinMax Control with simulation, high speed machining, and Ultimotion. OPTIONS AND ADDITIONAL FEATURES. Programmable Coolant and Air. Renishaw OMP40 spindle probe. Renishaw laser tool probe. 2.5 arc second encoders on A and C axes. Tool centerpoint management and coordinate rotation and scaling. Automation ready with pneumatic plumbing through the trunion. We can recommend a local rigger to load. It is available to view under power at our facility and we can provide videos upon request. The item “2013 HURCO VMX30UHSi 5-axis Vertical Machining Center 5 axis CNC Mill” is in sale since Friday, October 18, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wagner-machine_com” and is located in Champaign, Illinois. This item can be shipped to United States.

• Model: VMX30UHSi
• Modified Item: No
• Spindle Horsepower: 47 hp
• Machine Type: Machining Center
• Model Year: 2013
• Make: HURCO
• Type: Vertical
• Control Type: Hurco WinMax with Ultimotion
• Highest Spindle Speed (RPM): 18,000
• Non-Domestic Product: Yes
• X-Axis Travel Bed: 26” – 30”
• Y-Axis Travel Bed: 16 in – 20 in
• Z-Axis Travel Bed: 16 in – 20 in
• MPN: Does Not Apply
• Function: Milling
• Brand: Hurco
• Control: CNC

2016 Hurco VMX 42i – 4 Axis – Ultipocket, DXF, Tool and Material Library. We are pleased to offer the following for your consideration. Make: Hurco Model: VMX 42i Year: 2016. Table Size 24″ x 50″ Table Load Capacity 3,000 lbs. Table Top to Spindle Nose 6″ – 30″ X-Axis Travel 42″ Y-Axis Travel 24″ Z-Axis Travel 24 Spindle Taper CAT #40 Spindle Speed 12,000 RPM Spindle Motor 24 HP Tool Magazine Capacity 30 Position ATC Max. /Length/Weight 4.7″ / 11.8″ / 15 lbs. Tool Change Time ch-ch / tool-tool 7 sec. Rapid Traverse X, Y / Z 1378 IPM / 1,181 IPM Cutting Feedrates 600 IPM Machine Dimensions LxWxH 110″x86″x109 Machine Weight 14,500 lbs. 4th Axis Rotary Table (Like New) Chip Conveyor 30 Station Side Mount Tool Changer NC/Conversation Merge Tool & Material Library Ulti Pocket w/ Helical Ramp Conversational Programming Enhanced DXF File Transfer Capable Rigid Tapping Spindle Chiller Unit All Available Manuals. Revelation Machinery encourages first-hand inspection of all used machinery. Please verify all of the specs listed for this machine. Listing and template services provided by inkFrog. The item “2016 Hurco VMX 42i 4 Axis Ultipocket, DXF, Tool and Material Library” is in sale since Thursday, September 26, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “revelationmachinery” and is located in Bellevue, Washington. This item can be shipped to United States.

• Brand: Hurco
• MPN: Does not apply

HURCO BMC-20 3 AXIS CNC VERTICAL MACHINING CENTER MILLING MACHINE. This is a fixed listing for a Hurco CNC Milling Machine. Specifications: Make: Hurco Type: CNC Vertical Mill Table Size: 33″ x 15″ RPM: 60-6000 Travels (X, Y, Z): 22″ x 14″ x 14″ Spindle Taper: #40 ATC: 16 Approx Weight: 7000 LBS Approx Dimensions (overall): 111″ x 136″ x 94″. The mill is exactly as pictured and has been tested to be in operational condition. Special exceptions can be made for customers with UPS accounts if we are notified in a timely fashion. We will load your truck or carrier free of charge at our loading dock. International buyers are always welcomed. Get images that make Supersized seem small. Tailor your auctions with Auctiva’s. Track Page Views With. Auctiva’s FREE Counter. The item “HURCO BMC-20 3 AXIS CNC VERTICAL MACHINING CENTER MILLING MACHINE” is in sale since Sunday, September 29, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dockguys” and is located in Rochester, New York. This item can be shipped to United States.

• Make: HURCO
• Type: CNC, Vertical
• Highest Spindle Speed (RPM): 5001 – 7500
• Model: BMC-20
• Table Length: 30” – 34.9”
• Serial Number: BN-9002051-C
• X-Axis Travel Bed: 21” – 25”
• Y-Axis Travel Bed: 10” – 15”
• Z-Axis Travel Bed: 10” – 15”
• MPN: BMC-20
• Table Width: 15” – 19.9”

2003 Hurco 3-Axis CNC Vertical Machining Center. X – Axis Travel. Y – Axis Travel. Z – Axis Travel. Rapid Traverse Rate, All Axis. 72″ x 83″ x 96 High. Hurco UltiMax 3 CNC Control with Floppy Disk Drive. OptiKey Utility Disk Rev. R – Classic Upgrade. Q – Rigid Tap. Installation & Configuration Disks. UniMax OptiKey Utility Disk. (22) CAT – 40 Tool Holders. Coolant Pump & Tank. 10/15 – HP Spindle Motor. The item “Hurco 3-Axis CNC Vertical Machining Center, VM1, 2003, UniMax 3 Control” is in sale since Tuesday, September 10, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “neindustrialmachinery” and is located in New Britain, Connecticut. This item can’t be shipped, the buyer must pick up the item.

• Model: VM1
• Machine Type: Vertical Milling Machine
• Table Length: 30
• Max Spindle Speed (RPM): 8000
• Model Year: 2003
• Power Source: Electric
• X-Axis Travel Bed: 26″
• Y-Axis Travel Bed: 14″
• Z-Axis Travel Bed: 18″
• Spindle Taper: CAT 40
• MPN: VM1
• Function: Milling
• Brand: Hurco
• Table Width: 14
• Control: CNC
• Voltage: 230 V

Quick Switch 200 Tool Holders variety Included. Kurt Angle Lock Vise Included. 24 x12 Table Travel 5 inch Z. Spindle RPM 40 to 4200 Variable Drive. 250 IPM Rapid Positioning. 250 Data Block capacity. Drilling with Pecks Bolt Circles Milling Circles Frames with Pocketing. Done with just 2 Data Blocks. Cutter offset automatic Cut Right or Cut Left of geometry. Has Master Tape Eliminator Board From Accurate Machine Tools. Lap Top included to load Master and Save Programs. Ready to make chips. 240 Vac 3 Phase Power. The item “Hurco CNC Milling Machine” is in sale since Thursday, October 3, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tic-toc-tactical” and is located in Azusa, California. This item can be shipped to United States.

• Machine Type: Milling Machine
• Brand: Hurco
• Control: CNC

Machining Center: Hurco VM1 CNC Vertical Machining Center. Hurco VM1 CNC Vertical Machining Center. Spindle Nose to Table Top. 0 – 8000 RPM. 10 HP/15 HP Cont. Rapid Traverse Rate: X & Y Axis. Rapid Traverse Rate: Z Axis. 92″ x 78″ x 98H. Equipped With: Hurco Max CNC Control. 18-Positon Automatic Tool Changer. Notes: The Hurco appears to be in very good condition and can be inspected under power on our floor. The item “Hurco VM1 CNC Vertical Machining Center” is in sale since Tuesday, April 16, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “adamsmachinerycompany” and is located in Lake Bluff, Illinois. This item can be shipped to United States.

• Type: Vertical
• Control Type: Hurco Max CNC
• Model: VM1
• Spindle Horsepower: 10/15
• Table Length: 25” – 29.9”
• Model Year: 2005
• Highest Spindle Speed (RPM): 7501 – 10000
• Make: Hurco
• X-Axis Travel Bed: 26” – 30”
• Y-Axis Travel Bed: 10” – 15”
• Z-Axis Travel Bed: 16” – 20”
• Table Width: 10” – 14.9”

HURCO BMC-20 3 AXIS CNC VERTICAL MACHINING CENTER MILLING MACHINE. This is a fixed listing for a Hurco CNC Milling Machine. Specifications: Make: Hurco Type: CNC Vertical Mill Table Size: 33″ x 15″ RPM: 60-6000 Travels (X, Y, Z): 22″ x 14″ x 14″ Spindle Taper: #40 ATC: 16 Approx Weight: 7000 LBS Approx Dimensions (overall): 111″ x 136″ x 94″. The mill is exactly as pictured and has been tested to be in operational condition. Special exceptions can be made for customers with UPS accounts if we are notified in a timely fashion. We will load your truck or carrier free of charge at our loading dock. International buyers are always welcomed. Get images that make Supersized seem small. Tailor your auctions with Auctiva’s. Track Page Views With. Auctiva’s FREE Counter. The item “HURCO BMC-20 3 AXIS CNC VERTICAL MACHINING CENTER MILLING MACHINE” is in sale since Sunday, January 27, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “dockguys” and is located in Rochester, New York. This item can be shipped to United States.

• Make: HURCO
• Type: CNC, Vertical
• Highest Spindle Speed (RPM): 5001 – 7500
• Table Length: 30” – 34.9”
• Table Width: 15” – 19.9”
• Model: BMC-20
• MPN: BMC-20
• X-Axis Travel Bed: 21” – 25”
• Y-Axis Travel Bed: 10” – 15”
• Z-Axis Travel Bed: 10” – 15”
• Serial Number: BN-9002051-C

Advanced Machinery Co, 4530 Wadsworth Rd, Dayton OH 45414. Hurco Hawk 30 / DSM Vertical CNC Bed Mill, S/N H30M-05011090BD. Table Size – 11″ x 52″ X-Axis Travel – 35″ Y-Axis Travel – 18″ Z-Axis Travel – 20 Maximum weight on table – 770 Lbs. Distance, Spindle Nose to Table Top – 2.4″ min / 22.4″ max Distance, Face of Column to Spindle Center – 18″ Quill Diameter – 3.94″ Quill Travel – 5″ Spindle Taper – 40 Spindle Motor – 5 HP Feed Rates XY – 400 IPM Feed Rates Z – 250 IPM Dimensions – 113″ x 81″ x 98″ Net Weight, Approx – 4900 Lbs. Equipped with: Hurco Ultimax SSM Control with Dual Screens Conversational Programming Programmable Spindle Speeds – 80 to 3800 rpm Automatic Lubrication Coolant System Power Draw Bar. Available manuals – Operators Manuals Vol. 1 and 2, Maintenance Manual, Parks Listing & Wiring Diagram Manual. Notes – “as is” clearance price. Sale subject to Advanced Machinery Companies Terms & Conditions. Offered locally and subject to prior sale. Loading available at no charge. The item “Hurco Hawk 30 / DSM 3-Axis Vertical CNC Bed Mill, clearance priced” is in sale since Wednesday, August 29, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amcsales” and is located in Dayton, Ohio. This item can be shipped to United States.

• Model: Hawk 30
• Country/Region of Manufacture: Taiwan
• Spindle Horsepower: 5
• Table Length: 40” – 59.9”
• Model Year: 2000
• Bundle Listing: No
• Type: CNC, Vertical
• Control Type: Hurco Ultimax 3
• X-Axis Travel Bed: 31” – 35”
• Y-Axis Travel Bed: 16” – 20”
• Z-Axis Travel Bed: 16” – 20”
• MPN: Does Not Apply
• Highest Spindle Speed (RPM): 3501 – 4000
• Make: Hurco
• Table Width: 10” – 14.9”