Any R8 collet can be used to match the inboard side of your arbor.

Right angle table for the #3 and #3C milling machines.

DORIAN MMRAA R-8 BRIDGEPORT RIGHT ANGLE HEAD HORIZONTAL MILLING ATTACHMENT UNIT DOES NOT APPEAR TO HAVE BEEN USED, SUPERB CONDITION AS SHOWN.

We have a loading dock and fork lifts with the ability to load any type of truck. We can either use your account number or provide a rate quote.

Straight & L Housing.

End Milling Cutter Steel Right Angle Shoulder Disc CNC Lathe Machining Center. Precaution for using cutting tools. Precariousness: Direct touch to a sharp cutting edge may cause injury. Countermeasures: When you set up tools to the machine or take tools out of the case, please wear protective gloves. Precariousness: Misuse or inappropriate working conditions may cause tool breakage or dispersion of broken pieces. Countermeasures:Please use safety item, such as safety glasses and protective gloves. Please use in the range of our recommended cutting condition. See our catalog or instruction manuals. Precariousness: Excessive impact or heavy wear will increase cutting resistance and may cause tool breakage and dispersion of broken pieces. Countermeasures: Please use safety item, such as safety glasses and protective gloves. Early exchanging tools is preferable. Precariousness: Dispersion of heated or prolonged chips may cause injury or burn. For chips removal, please stop the machine beforehand and use safety items, such as safety glasses and protectives gloves. Precariousness: Tools and materials reach high temperatures during cutting operation. Direct touch to the tools and materials shortly after cutting may cause burn. Precariousness: Sparks, generation of heat or chips in high temperature during operation may cause file. Countermeasures: Please do not operate around Hazardous zone, in which there is some possibility of fire or explosion. In case of using oil-coolant, please make sure there is sufficient fire-protection equipment. Precariousness: Lack of dynamic balance during high-speed revolutions leads to vibrations which can make the tool break. Please conduct test-operation before cutting, and confirm that there is no vibration or unusual sound. Precariousness: Direct touch to the burs which were generated on the rough surface of the workpiece may cause injury. Countermeasures: Do not touch the workpiece with bare hand. Precariousness: If the insert or other tool parts are not installed properly, they can fall down or break which may cause injuries. Countermeasures: Please clean up insert pockets or clamping parts before setting insert. Please set up inserts with supplied wrench only, and confirm that the inserts or parts are clamped completely. Never use inserts or parts other than those prescribed. Precariousness: If inserts are clamped too tightly by supplementary tools like pipe etc. Inserts or body may break. Countermeasures: Do not use aids such as pipes. Please set up using supplied wrench only. Precariousness: When tools are used in high-speed revolution, inserts or parts may burst out of the body due to centrifugal force. Countermeasures: Please use in the range of our recommended cutting condition. Accuracy and balance of machine spindle should be checked and adjusted regularly to prevent wear of the bearing due to eccentric rotation. Milling Cutters and other Cutting Tools. Precariousness: Since milling cutter have sharp edged, direct contact with bare hands may cause injury. Precariousness: If a cutter lack balance, the tool can start to vibrate. The dispersion of broken piece can cause injuries. Precariousness: When drilling a through-bore, it is possible that a disc is created during the drilling procedure that can fly out of the workpiece at a high speed. This is very dangerous since the disc has sharp edges. Countermeasures: Please use safety items, such as safety glasses and protective gloves. Also attach a cover on a chuck part. Precariousness: Dispersion of falling down of broken inserts may cause injury. Countermeasures:Please Check that the cutting inserts are brazed firmly before use. Please do not use brazed tools in the condition that requires high cutting temperature. Precariousness: If Brazing is carried out many times, the strength of carbide insert is deteriorated and can break easily during cutting. Countermeasures: Please do not use tools that have brazed several times. The quality of the tool deteriorates. Precariousness: The tools can only be used for the appropriate application. It may damage tools and machines. Countermeasures: Please follow our recommended usage for the tools. There may be some delays due to flight, holiday, weather, local post, local natural disaster impact. It must also be in the original packaging.

Bridgeport Milling Machine Arbor Support. Seems to have been used very little.

ORIGINAL BRIDGEPORT RIGHT SIDE COLUMN WIPER 11154811. WE WILL COMBINE ITEMS. We sell new and used Bridgeport parts for both Series I and Series II Bridgeport Machines. Bridgeport Milling Head Repair, Inc.

Bridgeport right angle head. Haven’t cleaned it up at all so should do so nicely. Out of inventory of a local business that closed.

Bridgeport Quill Master Type JA J Head Milling Attachment with QRA Right Angle. Overall good used condition with smooth function. Spins freely with hand turn. Bearings are tight with no play. Some damage to the name plate. No cracks or breaks around tightening bolts.