Vertical CNC Milling Machine Center. The Haas VF-2 vertical machining center has 30″ x 16″ x 20 (762 x 406 x 508 mm) travels and is built utilizing vibration-damping cast-iron components. Like every Haas machine, the VF-2 represents years of ongoing refinement. Customer feedback, coupled with the relentless pursuit of perfection, sees advancements and design-enhancing changes incorporated directly into the production line every day. The Haas VF-2 is a rugged, small-footprint vertical machining center that yields reliability and accuracy in a small-framed machine. The VF-2 has a 40-taper cartridge spindle driven by a 20 hp (14.9 kW) vector drive. The VF-2 will run up to 7500 rpm in 1.2 seconds for finishing aluminum. Made entirely in The U. 7,500 RPM Spindle. FANUC and YASNAC Compatibility. Haas OneTouch Power Up. 3.5 Floppy Disk drive & RS-232 Port. Inch or Metric Programming. High-Speed Machining with Contour Accuracy Control. Heavy Duty Sheet Metal Enclosure. Chip Auger and Coolant Pan. Spindle Nose to Table (min). Spindle Nose to Table (max). Number of Std T-Slots. Max Weight on Table (evenly distributed). Max Torque w/opt Gearbox. Max Tool Diameter (full). 113 L/min, 6.9 bar. Power (options may increase requirement). 195-260 VAC/50 A 354-488 VAC/30 A. Specifications based on cata log brochure and subject to verification. As with any piece of equipment, new or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item’s cosmetic condition. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. 88″ x 102″ x 105H. MACHINE WEIGHT: 8,0 00 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Option to repair at dealer’s discretion. All third-party charges are not refundable. RETURN PRIVILEGE DOES NOT APPLY TO CONSIGNMENT OR DISCOUNTED ITEMS. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability, quality, and we back our equipment with a thirty day return privilege to assure your satisfaction. Our address is 20933 Plummer Street Chatsworth, CA 91311. Direct Capital provides equipment financing for our customers. For both new and used equipment. The item “1999 HAAS VF-2 CNC MILL 30×16, 4th-Axis Ready, Rigid Tap” is in sale since Friday, July 29, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Haas
• Country/Region of Manufacture: United States
• Model: VF-2
• Year of Mfg.: 1999
• Serial No.: 18447

1997 Haas VF-0 Vertical CNC Mill. The Haas VF-0 is a rugged, small-footprint vertical machining center that yields reliability and accuracy in a small-framed machine. This mill has a 40-taper cartridge spindle driven by a 20 HP vector drive motor and cutting capabilities of up to 710ipm. The Haas VF-0 VMC is the best value for your limited floor space. Very good working machine. Made entirely in The U. 10,00-RPM Spindle (Option In stalled). 20-Station CT-40 Carousel Automatic Tool Changer. Heavy-Duty Sheet metal Enclosure (with new windows installed). 3.5 Floppy Drive. 208/230 VAC 3-Phase Power. Spindle Nose to Table (min). Spindle Nose to Table (max). Number of Std T-Slots. Max Weight on Table. 15 HP (Continuous) 20HP (30 min). 14.9 kW (Continuous). Direct Speed Belt Drive. Max Tool Diameter (full). 4 scfm, 100 psi. 113 L/min, 6.9 bar. 195-260 VAC/50 A 354-488 VAC/30 A. Specifications subject to verification. As with any piece of equipment, new or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item’s cosmetic condition. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 90″ x 92″ x 104H. MACHINE WEIGHT: 7200 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Option to repair at dealer’s discretion. All third-party charges are not refundable. RETURN PRIVILEGE DOES NOT APPLY TO CONSIGNMENT OR DISCOUNTED ITEMS. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability, quality, and we back our equipment with a thirty day return privilege to assure your satisfaction. Our address is 20933 Plummer Street Chatsworth, CA 91311. Direct Capital provides equipment financing for our customers. For both new and used equipment. Jason Adler and Casey Goodell are our dedicated Finance Managers. Speak to them directly to find the program that best fits your business. The item “1997 HAAS VF-0 CNC Vertical MILL 20×16, 4th-Axis Ready, 10000 rpm, Rigid Tap” is in sale since Thursday, July 14, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Haas
• Country/Region of Manufacture: United States
• Model: VF-0
• Year of Mfg.: 1997
• Serial No.: 9640
• MPN: Does Not Apply

1997 H AAS VF-3 CNC. The Haas VF-3 is a rugged, medium-sized vertical machining center that yields full reliability and accuracy in a moderately sized machine. The VF-3 has a 40-taper cartridge spindle driven by a 15 hp spindle drive. 40″ x 20″ x 25 (1016 x 508 x 635 mm) travels and is built utilizing vibration-damping cast-iron components. Like every Haas machine, the VF-3 represents years of ongoing refinement. Customer feedback, coupled with the relentless pursuit of perfection, sees advancements and design-enhancing changes incorporated directly into the production line every day. With a long list of standard features and high-productivity options, the Haas VF-3 is one of the best values available today. This Haas VF-3 is in good working condition despite cosmetic wear shown from previous use. High Speed Brushless Servo Motors (710 ipm Rapids). Easy-Access Roll-Out Coolant Tank and Pump. User Friendly Haas Control. 3.5 Floppy Drive. Made entirely in The U. Heavy-Duty Sheet metal Enclosure. 208/230-VAC 3-Phase Power Rdy. 20-Station Ct-40 Carousel Automatic Tool Changer. AC Brushless Direct-Coupled Servo Motors and Drives. 7500-RPM Spindle Driven by a 15 Horsepower Intermittent Duty Gearbox Motor. Spindle Nose to Table (min). Spindle Nose to Table (max). Number of Std T-Slots. Max Weight on Table (evenly distributed). 2 Speed Geared Head. Rapids on Y, Z. Max Tool Diameter (full). 113 L/min, 6.9 bar. Power (options may increase requirement). Specifications based on catalog brochure and subject to verification. As with any piece of equipment, new or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item’s cosmetic condition. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 12,000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. These movers will be using specialty equipment which increases the cost of their service. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 125″ x 110″ x 120H. MACHINE WEIGHT: 12,500 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Option to repair at dealer’s discretion. All third-party charges are not refundable. RETURN PRIVILEGE DOES NOT APPLY TO CONSIGNMENT OR DISCOUNTED ITEMS. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability, quality, and we back our equipment with a thirty day return privilege to assure your satisfaction. Our address is 20933 Plummer Street Chatsworth, CA 91311. Direct Capital provides equipment financing for our customers. For both new and used equipment. Jason Adler is our dedicated Finance Manager. Speak to him directly to find the program that best fits your business. The item “1997 HAAS VF-3 CNC MILL 40×20, 4th-Axis Ready, Rigid Tap, Prog. Coolant” is in sale since Thursday, December 24, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Haas
• Country/Region of Manufacture: United States
• Model: VF-3
• Year of Mfg.: 1997
• Serial No.: 9813