2005 Haas TM-1 CNC Vertical Machining Center. In absolute excellent condition both working & cosmetically. One of the cleanest TM-1s we’ve ever come across. This machine is pristine! Came out of a local CNC training facility so did not see much use. Super quiet spindle & smooth axes all around. 1,000 Spindle Hours 1,100 Motion Time Hours. Everything on this machine is in 100% working condition. Rohner Machinery does not broker equipment. All machines are inspected & tested by our service techs to insure that all features & functions are in working condition. Check out the short video below of the machine under power. HAAS TM-1 CNC VERTICAL MACHINING CENTER DEMO. Haas TM-1 CNC Toolroom Milling Machine. 47.75″ x 10.5″. Table Top to Spindle Nose. 3.5 / 12 lbs. 0.1 – 200 IPM. 3 PH/Single PH 208 V / 240 V. 85″ x 69″ x 109. The above information is to the best of our knowledge from sources deemed reliable, but should be verified at the time of inspection to confirm accuracy. We will help load small items at no charge. Hours: M-F 7:30AM – 4:30PM Saturday by appointment only. By Purchasing equipment from Rohner Machinery Sales, Inc. All Prices are in U. All proposals and acceptances of orders are made with the mutual understanding that orders are not subject to cancellation, and that a deposit is REQUIRED within 7 calendar days or this invoice is invalid. If a hold is desired, a 10% deposit is required to hold machines for up to 30-days. Deposit is non-refundable 14-days after receivable. In no event shall RMS be responsible or liable for special or consequential damages. MACHINE USE & SAFETY. The free listing tool. The item “2005 HAAS TM-1 CNC Vertical Mill Milling Machining Center. Pristine! 1,000 Hrs” is in sale since Monday, September 9, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “rohnermachinery” and is located in Fullerton, California. This item can be shipped worldwide.

• Brand: Haas
• Model: TM-1

Haas TM-1 CNC Toolroom Mill. Model#: TM-1 Toolroom Mill. Control Haas 32 Bit CNC Control. Table Size 10.5″ x 47.75″. Spindle Taper Cat 40. Spindle Speeds 0 – 4,000 RPM. Rapid Traverse (X/Y/Z) 200 IPM. Table Load 1,000 Lbs. Spindle Drive 7.5 HP. Haas 32Bit CNC Control, Rigid Tapping, Coolant Tank & Pump, 10 Station Automatic Tool. 208 Volt, 3 Phase 240 Volt, Single Phase. Approximate Machine Dimensions: 87″L x 62″W x 109H. Approximate Weight: 3300 lbs. The item “Haas TM-1 CNC Toolroom Mill” is in sale since Monday, August 21, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “machinesused” and is located in Minneapolis, Minnesota. This item can’t be shipped, the buyer must pick up the item.

• Brand: Haas
• Model: TM-1

HAAS TM-1 VERTICAL MACHINING CENTER WITH 10 TOOL ATC AND 4. TABLE SIZE: 10.5 X 42. TRAVELS: 30X X 12Y X 16Z. 4000 RPM MAX, CAT 40. THREE PHASE OR SINGLE PHASE 220 VAC POWER. THIS MACHINE HAS THE HANDLES FOR MANUAL JOGGING. LOW HOURS: 2459 MOTION AND 3447 SPINDLE HOURS AS PICTURED. COOLANT TANK AND PUMP. HAAS INTUITIVE PROGRAMMING SYSTEM. MACHINE IS UNDER POWER AND AVAILABLE FOR INSPECTION IN. ALL AXES AND SPINDLE ARE SMOOTH AND QUIET. LOADING ON FLATBED OR LINE TRUCK INCLUDED. The item “2006 HAAS TM-1 TOOL ROOM MILL LOW HOURS WITH 10 TOOL ATC AND 4TH READY” is in sale since Tuesday, February 21, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “eskridgegoat” and is located in Oxnard, California. This item can be shipped to United States.

• Brand: HAAS
• MPN: TM-1
• Model: TM-1
• Country/Region of Manufacture: United States

Video available upon request. The item “Haas TM-1 CNC Vertical tool Room Mill” is in sale since Wednesday, June 01, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “amcoinc” and is located in Longmont, Colorado. This item can’t be shipped, the buyer must pick up the item.

• Brand: Haas
• Country//Region of Manufacture: United States
• Model: TM-1

1600 Super low spindle run hours. Travel, 30″ x 12″ x 16. We hardly used this guy. We bought a VF2SS when HAAS had a big sale in 2014, and now it pretty much just really sits. So I decided to let it go. It is currently wired for 208 3 phase. I have heard these can run on 220 single phase but not sure. If that is a concern call your local HAAS dealer and give them the serial number and they can find out. For anybody just starting out in the business: the HAAS machines are reliable, and when there is an issue the service guys are usually only about a day out , with mostly American made parts. I encourage you to ask questions! Can make appointment for inspection Productivity in Omaha has a guy that lives in Lincoln, it may not cost much to have him perform an inspection?? Machinery dealers do not contact me, I don’t have time for it! I can load machine but not until it’s paid for. The item “HAAS TM-1 2003 cnc toolroom mill” is in sale since Monday, March 28, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tulmakn” and is located in Lincoln, Nebraska. This item can’t be shipped, the buyer must pick up the item.

47.75 x 10.5. Spindle nose to table top. 85 x 65 x 109. Haas control, 10 position ATC, 15 megs memory, rigid tap, hand wheels, guarding. The item “#9679 Haas TM-1 CNC Toolroom Mill” is in sale since Friday, March 18, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “greenwayassoc” and is located in Orange City, Iowa. This item can be shipped to United States.

• Brand: Haas

2 006 HAAS TM-1 CNC Toolroom Mill. User Friendly Haas Control. Visual Quick Code Programming. Three Modes of Operation. Full Manual with Digital Read-Out. 30″ x 12″ x 16 (xyz) Travels. 4,000 rpm Vector Drive Spindle. Brushless Servos on All Axes. Easy Setup and Operation. 47.75″ x 10.5″. 1213 x 268 mm. Direct Speed, Belt Drive. Spindle Nose to Table Top. 4 scfm, 100 psi. 113 lpm, 6.9 bar. 2159 x 1626 mm. Specifications subject to verification. As with any piece of equipment, new or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item’s cosmetic condition. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 85″ x 64″ x 109H. MACHINE WEIGHT: 3,300 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Option to repair at dealer’s discretion. All third-party charges are not refundable. RETURN PRIVILEGE DOES NOT APPLY TO CONSIGNMENT OR DISCOUNTED ITEMS. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability, quality, and we back our equipment with a thirty day return privilege to assure your satisfaction. Our address is 20933 Plummer Street Chatsworth, CA 91311. Direct Capital provides equipment financing for our customers. For both new and used equipment. Jason Adler and Casey Goodell are our dedicated Finance Managers. Speak to them directly to find the program that best fits your business. The item “2006 HAAS TM-1 CNC 30×12 TOOLROOM MILL” is in sale since Thursday, February 11, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Haas
• Country/Region of Manufacture: United States
• Model: TM-1
• Year: 2006
• Serial No.: 48413

2006 Haas TM-1 CNC Milling Center w/ 10 Position ATC. Spindle Nose to Table (max) 20. Spindle Nose to Table (min) 4. T-Slot Center Distance 4.00. Number of Std T-Slots 3. Max Weight on Table (evenly distributed) 1000 lb. Max Speed 4000 rpm. Drive System Direct Speed Belt Drive. Bearing Lubrication Grease packed. Rapids on X 400 in/min. Rapids on Y 400 in/min. Rapids on Z 400 in/min. Max Cutting 400 in/min. Max Tool Diameter (full) 3.5. Max Tool Weight 12 lb. Tool-to-Tool (avg) 5.7 sec. Chip-to-Chip (avg) 6.5 sec. Machine is available for inspection at our Woodstock IL warehouse. The item “Haas TM-1 CNC Mill with Tool Changer yr. 2006″ is in sale since Friday, January 22, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “usedcncbuyandsell” and is located in Woodstock, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Brand: Haas
• MPN: TM-1
• Country/Region of Manufacture: United States
• Model: TM-1

2 006 HAAS TM-1 CNC Toolroom Mill. User Friendly Haas Control. Visual Quick Code Programming. Three Modes of Operation. Full Manual with Digital Read-Out. 30″ x 12″ x 16 (xyz) Travels. 4,000 rpm Vector Drive Spindle. Brushless Servos on All Axes. Easy Setup and Operation. 47.75″ x 10.5″. 1213 x 268 mm. Direct Speed, Belt Drive. Spindle Motor Max Rating. Spindle Nose to Table Top. 4 scfm, 100 psi. 113 lpm, 6.9 bar. 2159 x 1626 mm. Specifications subject to verification. As with any piece of equipment, new or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item’s cosmetic condition. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 3000 lbs. Less than 12000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 85″ x 64″ x 109H. MACHINE WEIGHT: 3,300 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Option to repair at dealer’s discretion. All third-party charges are not refundable. RETURN PRIVILEGE DOES NOT APPLY TO CONSIGNMENT OR DISCOUNTED ITEMS. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability, quality, and we back our equipment with a thirty day return privilege to assure your satisfaction. Our address is 20933 Plummer Street Chatsworth, CA 91311. Direct Capital provides equipment financing for our customers. For both new and used equipment. Click the Direct Capital logo on the left to be redirected to the Equipment Financing Center. Jason Adler and Casey Goodell are our dedicated Finance Managers. Speak to them directly to find the program that best fits your business. The item “2006 HAAS TM-1 CNC 30×12 TOOLROOM MILL” is in sale since Monday, September 28, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Haas
• Model: TM-1
• Year: 2006
• Serial No.: 48413