I have both a CNC converted Grizzly G0704 mill and CNC converted G0752 lathe. They are in excellent condition and working perfectly. It is run on Mach3 and the license is included. This is because the same controller and computer runs them both. I have made this so you only need to change the connectors (aircraft type) to use the other machine. I use quality parts to do this conversion and it only has about 500 hours between them. I have also just gone thru them and adjusted them and cleaned and greased them. They are ready to use. I will also include a lot of tooling, all is not in the photos attached, to many things for the listing but past my inventory list below for more details. Note: The tools on the wall as well as the tool boards are also for sale, but separately, and not included with the mill and lathe. This goes for the 2 gray cabinets in the photos with tooling.

I have both a CNC converted Grizzly G0704 mill and CNC converted G0752 lathe. They are in excellent condition and working perfectly. It is run on Mach3 and the license is included. I have made this so you only need to change the connectors (aircraft type) to use the other machine. I used quality parts to do this conversion and it only has about 500 hours between them. I have also just gone thru them, made adjustments, calibrated, cleaned and greased them. They are ready to use. I will also include a lot of tooling, not enough photos allowed to cover it all, to many things for the listing. Way to many things to list, you can see more details on the Grizzly site for each machine. But I can negotiate the actual price up or down depending what your would like. I will also sell without tooling or with even more that I have. About 50+ end mills are also included, 25% or more are new. Note: The tools on the wall as well as the tool boards are also for sale, but separately, and not included with the mill and lathe. However, the black Craftsman box with tooling is included and only about 4 years old, ball bearing drawers. I also have many more photos, if you somewhat near Gold Canyon, AZ, it would be best to stop over and see all that is included. The last photo was made on my mill and is called a Turners Cube, very cool and lots of videos on YouTube. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “baxter7092″ and is located in this country: US. This item can be shipped to United States.

• Modified Item: Yes
• Country/Region of Manufacture: China
• Spindle Horsepower: 3.0
• Machine Type: Mill & Lathe
• Custom Bundle: Yes
• Function: Turning, Milling
• Modification Description: 2 Motor Options Included
• Max Spindle Speed (RPM): 6200
• Model Year: 2015
• Power Source: Electric
• Control: CNC
• Voltage: 120 V
• UPC: 0690550106965
• Brand: Grizzly
• Model: G0704
• MPN: G0704

Complete Working Machine on Windows 10 PC. Emco Software WinNC included. Other software included, see below. This is the ACC version. Connects over ethernet, no ISA card or dinosaur computer needed. All machine specs are in picture. The video is me jogging the Y axis + and. 001 indicator and showing no backlash. All axis checked and are prefect. This machine is perfect and very low hours. Just add your tooling(End Mills and a Vice) and you can start milling. 4 Emco tool holders included. Machine and several Fanuc 21 manuals and teaching guides. I have it on a xbox 360 controller for Jog Mode. You can program any functions to the controller. Jog x, y, z and -+ feed. Turn on spindle, run program…. No USB Fanuc Keyboard. The PC keyboard is fine and keyboard layout map is included. Software for included Windows 10 PC. WinNc V 14.26.0001. I assume everyone will want this setup. I have a shortcut to the Fanuc program on the desktop that you can dump generic g-code in the text document from your cam/cad program and then run it in WinNc. You can fully program in WinNc. If you want to use an XP computer I have more software available. But its older, like 20+ years for WinCam. I would just run with windows 10. But you will get all software and guides on the CD. Couple OLD versions of the different types of Fanuc included. Original MSD data from Emco included. This is the machine parameters matched to serial number of the machine. Local pick-up is preferred. Let me know any questions. Have 12 years experience in these small Emco bench top machines. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “unique_packaging_co” and is located in this country: US. This item can be shipped to United States.

• Spindle Horsepower: 1 hp
• Machine Type: Vertical Milling Machine
• Table Length: 10 in – 14.9 in
• Spindle Taper: Emco Version BT30 Sort Taper
• Z-Axis Travel Bed: Less than 10 in
• Table Width: Less than 10 in
• Brand: Emco
• Function: Milling
• X-Axis Travel Bed: 10 in – 15 in
• Control: CNC
• Model Year: 2008
• Max Spindle Speed (RPM): 3001 – 3500
• Voltage: 110 V
• Model: 55
• Y-Axis Travel Bed: Less than 10 in

Hardinge horizontal vertical TM milling machine in good condition. Includes 3ea 5c arbors, overarm and support, vertical head, 23ea 4c collets, 4ea 5c collets, Hardinge 4 jaw Chuck on the dividing head, spindle wrench, vise, collet nose adaptor, Hardinge dividing head with all four plates and tailstock, and other misc. This mill is 480v but has a transformer on it to run on 240v 3ph. Table has some mill marks, backlash less than 1/4 turn and ways look good. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Please check out my other auctions. Call three one four seven five zero one four zero three with questions. Items not picked up within 60 days will be resold. The item “Hardinge TM Horizontal Vertical Milling Machine Dividing Head Lots Of Tooling” is in sale since Thursday, August 5, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “ddmo1″ and is located in Millstadt, Illinois. This item can be shipped to United States.

• Brand: Hardinge
• Machine Type: Milling Machine
• Voltage: 240 V
• Model: TM
• MPN: Tm

Bridgeport Series 2- 4HP Vertical Mill w/ lots of 40 Taper Tooling. Up for sale is this used Bridgeport Series 2- 4HP Vertical Mill w/ lots of 40 Taper Tooling. Model: Series 2 (II). Includes lots of 40 Taper Tooling as seen in pictures. Approximate Specifications – Subject to Verification. See attached pictures for more information. We can send more pictures upon request. Additional charges for loading may apply. ITEM IS OFFERED BY. Please do NOT pay until you are invoiced! Unless we receive a valid resale card. Aragon, LLC a service charge for each item we list. UPS only handles up to a maximum of 150 lbs. Wood crating and palletizing charges will be determined according to the size of the item. The following is the policy of Gary S. We regret that this policy must be put into place. It is required due to limited storage available at our facility. Items are subject to re-listing immediately upon forfeiture. Other than whats displayed in the images accompanying this listing, or mentioned in the description above, there are no manuals, instructions, additional parts or accessories. Unless otherwise stated in the description, the images show the actual , or an accurate representation of the item for sale. All images are photographed by us and are the exclusive property of Gary S. The description is written to the best of our knowledge, but is NOT guaranteed to be 100% accurate. Use of any material in this advertising is prohibited without express written permission from Gary S. The item “Bridgeport Series 2- 4HP Vertical Mill with lots of 40 Taper Tooling” is in sale since Tuesday, November 17, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “gary-aragon” and is located in Newark, California. This item can be shipped to United States.

• Spindle Horsepower: 4 hp
• Model Year: Unknown
• Power Source: Electric
• Function: Milling
• Brand: Bridgeport

2018 haas dm2 cnc milling machine, 4th axis and lots of tooling. Has the following options. Hrt160ss 4th axis rotary. 300 psi Through spindle coolant. Lots of tooling come with the machine. Approximately 30 tool holders, facemills, etc. Big kaiser angle head IS INCLUDED! The item “2018 haas dm2 cnc milling machine, 4th axis and lots of tooling” is in sale since Tuesday, March 23, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “wilnea90″ and is located in Belleville, Arkansas. This item can be shipped to United States.

• Brand: Haas
• Model Year: 2018
• Machine Type: Milling Machine
• Voltage: 220 V
• Function: Drilling
• Power Source: Electric
• Spindle Horsepower: 15 hp
• Control: CNC

NICE LITTLE BENCH MILL. The item “ATLAS HORZ MILL, BENCH MODEL 115 VOLTS LOTS OF TOOLING” is in sale since Monday, December 28, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “donsmachine” and is located in San Bernardino, California. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Machine Type: Horizontal Milling Machine
• Power Source: Electric
• Table Width: 4.5
• Control: Manual

See photos for tooling. The item “Rutland Vertical Milling Machine 26803000, lots of tooling” is in sale since Friday, March 13, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “nutation1″ and is located in Whittier, California. This item can’t be shipped, the buyer must pick up the item.

• Phase: single phase
• Machine Type: Vertical Milling Machine
• Power Source: Electric
• MPN: 26803000
• Function: Milling
• Brand: Rutland
• Voltage: 120 V

Offered is a preowned Sherline Model 5400 mill. The last photo shows the Sherline company description of the mill and accessories. Included is a Y Axis Way Cover that is in the P/N 5090 is in its box. I will be listing a Sherline lathe and accessories. The item “SHERLINE MODEL 5400 12 DELUXE MILL PACKAGE A HARDLY USED LOTS OF ACCESSORIES” is in sale since Saturday, December 7, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “houseofclocks” and is located in San Diego, California. This item can be shipped to United States.

• Function: Milling
• Brand: SHERLINE