Exterior: Very good condition with only a few paint chips. Control board functions and shows low signs of wear. Some scratches on interior paint. Electrical Hardware: Controls and circuitry functioning and in good condition. May need fuse/battery replacement and/or. Mechanical Hardware: Sounds mechanically and mechanic says it functions/operates fine. Overall: Machine is operable. Machining Center, new in 1994. TRAVEL, LONGITUDINAL — (X AXIS) ——- 25.5. TRAVEL, CROSS ———- (Y AXIS) ——- 15.7. TRAVEL, VERTICAL ——- (Z AXIS) ——- 18.1. TABLE SIZE ——————————– 33.1″ X 16.5″. TABLE LOAD CAPACITY ———————– 770 LBS. DISTANCE SPINDLE CENTER TO COLUMN ——— 14.76. DISTANCE SPINDLE NOSE TO TABLE, MAX. SPINDLE SPEEDS, DIRECT DRIVE ————– 45 TO 6,000 RPM. MAIN DRIVE MOTOR ————————– 10 HP. APPROX MACHINE WEIGHT —————- 7,600 LBS. APPROX MACHINE DIMENSIONS ———— 85″(LR) X 98″(FB) X 91(H). 16 STATION AUTOMATIC TOOL CHANGER. The item “Supermax Max-1 Rebel Vertical CNC Mill” is in sale since Thursday, June 16, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Other Mfg & Metalworking”. The seller is “as-technologies” and is located in Erlanger, Kentucky. This item can’t be shipped, the buyer must pick up the item.

• Brand: Supermax
• Model: Max-1 Rebel

9 X 49 Table. Variable speed, 3HP Spindle Motor. R8 (NST#30) Spindle Hardened & Ground. Chrome-Plated Slide Ways and Gibs compatible with Bridgeport Mill. Hardened & Ground Table top. Double brass-nut backlash compensated on XY leadscrew. Chrome plated precision ground quill with internal ground of quill housing. Class 7 spindle bearing. Power quill feeds with automatic stop. Tool box & Tools. Rubber chip cover (front & rear). One shot lubrication system. Tool and tool box. Ac Acu-Rite 200S DRO, 3 axis XY and knee DRO installed. O Servo model 150 Power Feed X. Servo model 150 Power Feed Y and Servo model 200 power feed on knee installed. 9 x 49 (228 x 1245mm). 3 x 5/8 (3 x 15.875mm). Longitudinal travel (W power feed). Table to spindle nose (D). Over swivel on turret. Head Swivel (R & L). Head tilt (UP & DOWN). Spindle to column (F). 0.0015 – 0.003 – 0.006. The item “Precision Vertical Turret Milling Machine” is in sale since Friday, June 17, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “atmi1992″ and is located in Ontario, California. This item can be shipped to United States.

• Brand: Manford
• Model: 2V
• Country//Region of Manufacture: Taiwan
• Country/Region of Manufacture: Taiwan

This Listing is for a. THIS MILL IS SINGLE PHASE. This is a very high precision milling machine, made in Taiwan. There are no shortcuts taken with these machines, they are absolutely top of the line! Here are some features of this milling machine. Main High Quality Features. High Grade Meehanite Castings. Head Swivels Left and Right, AND Tilts Front To Back. Turcite B way material for smoother table movements and longer life. Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy. And greatly extends machine life. One Shot Lubrication system is standard equipment, which also extends machine life, and. Reduces oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping a lever. High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws). High Precision Spindle with +/. 0001 or less runout for greater tool life and accuracy. Balanced pulleys in head for smooth and quiet operation. Full featured head with automatic quill feeds in 3 steps for boring operations. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. The Quill is Precision Ground, then Hard Chrome Plated for longer life. Available with either step pulley speed changes, or variable speeds to suit the user’s preference. Built in coolant sump in machine base. Tolerance Test Certificate included, each machine is checked for accuracy through a careful. Normal wear items such as belts, bushings, etc. Industrial users looking for a top quality, full featured vertical knee type milling machine. High end gunsmiths looking for a 9×49 size knee type milling machine. Hobby / Home Shop users who want a very high end, top of the line, full featured knee type. Milling machine, at a very reasonable price. Any other users who can appreciate a top quality machine that is built in Taiwan. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size – 9×49. X Axis Travel – 36. Y Axis Travel – 12. Z Axis Travel (Knee) – 17. Distance, Spindle to Table – 2/18. Quill Travel – 5. Leadscrew Type – Precision Ground ACME Leadscrew W/ Double Nut Backlash Adjustments on X and Y Axis. Leadscrew Pitch – 0.200 (5 Threads Per Inch). Dial Graduations – 0.001. Spindle Taper – R8. Spindle Speed Range – 60-4200 RPM (Variable). Speed Change Type: – Variable Speeds. Spindle Bearing Type – High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class – C7. Main Motor HP / Power – 3 HP 1 PH. Overall Height, Head Up – 87. Depth – Front to back, rear of machine to front of knee casting 40; Rear of machine to tip of Y axis handle 46. Width – X Axis Table Handles, Tip to Tip 62. Net Weight – 2300 LBS. Voltage / Phase – 220 Volt Single Phase. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-949TV-1PH 9×49 VERTICAL MILLING MACHINE, 5 YEAR WARRANTY, FREE SHIP, TAIWAN” is in sale since Thursday, June 16, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-949TV
• Country/Region of Manufacture: Taiwan
• Model: PM-949TV-1PHASE

Im keeping the FP42NC and this one is up for sale. The “L” series machines are amazing prototype machines. Perfect for those unusual jobs that no other machine will handle. Machine works perfectly, you can see it below in referenced mode. Spindles are tight and quiet. Ways are perfect, with no apparent wear. Buyers are welcome to check the machine out in person at my shop where it is wired to power. This a traveling column machine with glass scales. It has a cutting area of 31″ in X by 16.5″ in Y abd 16.5 in Z. You wont find another CNC machine with this size envelope anywhere for the footprint. Glass scales make this unit very accurate, you could probably use it as a CMM in a pinch. This machine has a large working surface and a t-slots on the front of the table allowing for overhanging work. The upper spindle assembly is on a dovetail so it can be moved forward for extra travel. Factory coolant pump is included along with (1) Deckel Coolant hose assembly with adjustable valve. The control is a Dialog 3 and has RS232 input for loading and sending programs from a PC. It has 24K of memory. The control enclosure has an integral 440 to 380 transformer. It has a 3100 RPM horizontal and vertical spindle All three NiCAD Batteries in the Control and the PLC are newly replaced. I will also provide a working post processor for this machine. The Y axis glass scale has the never green plastic dust seals but you will need to replace the seals on the Z and X axis as they are worn out. (X is less important as its hard to get any contamination up there due to the way its mounted). Thse seals are available from Heidenhahn in bulk and are pretty easy to change. I will include printed photo illustrated instructions on how to change the seals out and clean the glass scales. NEW flexible wire bundle protective tubing is installed. I guarantee that the machine is in good mechanical condition, and that and the Dialog 3 CNC control and all cards in the PC1 PLC and the Siemens SIMOREG Servo amp arein good working condition. Interested buyers are welcome to drop over and operate the unit or bring cad files over and see the machine load files and cut metal. European buyers are welcome. _gsrx_vers_526 GS 6.6.6 (526). The item “Deckel FP41NC L Traveling Column CNC Milling Machine with Dialog 3 Control” is in sale since Monday, June 13, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “srlsales” and is located in Petaluma, California. This item can be shipped to United States.

Looks to have barely been used. Please Note the outside of the box is in rough shape as seen in the pic. Please view all pics as they are part of the description. Please see our other listings. The item “Machinist Milling Tool Bridgeport Boring Head #2, R8 Arbor” is in sale since Sunday, June 12, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “carolkick032″ and is located in Tewksbury, Massachusetts. This item can be shipped to United States.

• Brand: Bridgeport
• MPN: Does Not Apply

Vc cnc bed mill milling machine with centroid M400. New eisen 3hp variable head last year. 0 to 500 low range 500 to 4200 high range. 31.600inch X axis travel. 18 inch z axis. Inverter drive, tied to controls and tool library or independent. 4 th axis wired. Bt 30 tools with lots of tooling. 220 3phase 20 amp. Centroid M400 3 axis controls. Ower drawbar, halogen , auto oil. Achine under power and can be seen running. HAS been used primarily for aluminum 1 off shop work. F you have ever wanted to step into cnc controls but was intimidated with code. This controller is very easy to run tasks. Pockets, circular interpolation , bolt patters, mirror work, production sub routines, w/o any code memorization or training. Y far the easiest and most powerful step from manual to cnc controls there is! Ill load/skid onto your truck for 75.00. Video under power and running on request. The item “Cnc Milling Machine. A Trumph B3-vc Cnc Mill” is in sale since Wednesday, June 15, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jlcustom1-us” and is located in Oregon City, Oregon. This item can be shipped to United States.

• Brand: A Trumph

Looks to have been lightly used, some of the paint is chipped as seen in pics, the original tag is missing, and there are 2 threaded holes (not sure why). Please view all pics as they are part of the description. Please see our other listings. The item “Machinist Milling Tool Bridgeport Right Angle Head, R8 Arbor” is in sale since Sunday, June 12, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “carolkick032″ and is located in Tewksbury, Massachusetts. This item can be shipped to United States.

• Brand: Bridgeport
• MPN: Does Not Apply

2008 DOOSAN MV 4020 CNC M ILL. High Precisi on , He avy Duty Vertical Machining Center. ICTURED IN USE (Tooling Not Included). The MV 4020 is designed for heavy cutting, long-term high accuracy, and superior surface finishes. Classic manufacturing methods and ultra rigid construction are combined with advanced technological features to provide exceptional value. This Doosan MV 4020 is in excellent condition both in working / running ability and cosmetically. Currently located in a machine shop making parts using oil based coolant (thus the brown coloring shown). No known issues with this machine. Please take a look at the sample video below taken while this machine was in the process of cutting parts. Then check out the list of features and specifications further below. 8,000 RPM Spindle. Powerful 20hp (30 min) high torque spindle motor. Optional 230 PSI Through-Spindle coolant (installed). High precision spindle with two double-row cylindrical roller bearings and two angular contact bearings. Spindle air blow (M14). Spindle speed override 10 – 150%. Custom Micro B (User Definable). Memory random Double Arm (30) ATC. Portable manual pulse generator. Program and data protection key switch. Massive One-piece Meehanite cast iron bed. Wide induction Reulon mating way surfaces. Servomotors mounted directly to the oversized ballscrews. Fast 1,181 IPM Rapid Traverse Rate. Metered piston distributor lubrication. Base Flush Chip Disposal. Full enclosure splash guard. Flood coolant with large separate coolant tank. Instruction manual, parts list, and electrical drawings included. Fanuc operator and maintenance manuals included. 19.7″ x 47.2″. Spindle Nose to Table Top. 5.9″ to 30.5″. Column to Spindle Center. AC Spindle Motor 30 min. Spindle Torque (30 min). X and Y Axis Rapid Traverse Rate. 04 – 472 IPM. Floor Space Required (W x D). 205 – 235 Volts / 3 Phase. Specifications subject to verification. As with any piece of equipment, new or used, this item will require additional inspection after it arrives due to the vibration during transit. We recommend you hire a professional service person to install the machine, test it and perform any necessary service adjustments before putting it in to production. Please refer to the pictures for this item’s cosmetic condition. A forklift may be required to remove the machine from its skid. The cosmoline can be removed using a light kerosene/water mixture. Listed on every item are the directions and information needed to do so. Items over 12,000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. These movers will be using specialty equipment which increases the cost of their service. We may charge more in the case of items located outside our showroom. MACHINE DIMENSIONS: 1 30″ x 108″ x 115 H. Coo lant Assem bly Seperate: 130″ x 108″ x 24H. MACHINE WEIGHT: 15,400 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. This item is subject to prior sale. Machinery Turn-around Time – Your order is processed after it is paid for in full. Many factors come in to play when purchasing industrial equipment. Our turn-around time depends on the schedules of these outside sources. Option to repair at dealer’s discretion. All third-party charges are not refundable. RETURN PRIVILEGE DOES NOT APPLY TO CONSIGNMENT OR DISCOUNTED ITEMS. Damages- We go above and beyond to assure your item arrives safely but there have been cases when an item still gets damaged during transit. We will not be held accountable for an item damaged during transit unless it was packaged improperly. If an issue arises during transit we will do our best to represent you as our customer and resolve the issue. We specialize in reliability, quality, and we back our equipment with a thirty day return privilege to assure your satisfaction. Our address is 20933 Plummer Street Chatsworth, CA 91311. Direct Capital provides equipment financing for our customers. For both new and used equipment. Jason Adler and Casey Goodell are our dedicated Finance Managers. Speak to them directly to find the program that best fits your business. The item “2008 DOOSAN MV 4020 CNC MILL with Fanuc Ctrl, 20HP Spindle, Coolant Thru, 8000 rpm” is in sale since Tuesday, March 15, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Doosan
• MPN: Does Not Apply
• Country/Region of Manufacture: Japan
• Model: MV 4020

1999 MODEL Table size 55″ x 25.6 X AXIS TRAVEL 40″ Y AXIS TRAVEL 24″ Z AXIS TRAVEL 22″ SPINDLE SPEED 10,000 RPM SPINDLE MOTOR 30 HP SPINDLE TAPER CAT 40 RAPID TRANSVERSE RATE 1181 IPM FEED RATES X/Y/Z 1180 IPM TOOL POSITIONS 40 ATC ULTIMAX CONTROL DUAL SCREEN CRT THRU SPINDLE COOLANT (300psi) CHIP AUGER [DUAL] CHIP CONVEYOR USB INTERFACE 180 GALLON COOLANT CAPACITY Newly Replaced Y BALL SCREW HARD DRIVE (FACTORY REBUILD) TOUCH SCREEN INTERFACE So we bought this machine to accommodate some new employees. We currently run only Fadal machines. We replaced several parts to make sure the machine would be a reliable functional machine for production. The employee we hired is no longer with us and we are moving forward with additional fadal machines and need to get this machine out of the way. Machine weighs approximately 28,000 lbs. We have cut a few parts on it, but currently do not have staff that is trained to operate. It is powered up and ready to run. Remaining balance due within 7 days. Does not include any tooling/ TOOL boxes. Listing is for the machining center. The item “HURCO CNC MILL VTC-40, 10,00 rpm spindle” is in sale since Monday, June 13, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “vicbagger” and is located in Francisco, Indiana. This item can’t be shipped, the buyer must pick up the item.