This Listing is for a. Features a DC Brushless Variable Speed Motor. And is BELT DRIVE for smooth and quiet operation! This machine uses 120V Standard Power! Here are some features of this milling machine. R8 Spindle Taper Standard, so it uses the most commonly available tooling. DC BRUSHLESS Variable Speed Motor, Powerful, Smooth and Reliable. Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears. Main Colum is attached to the base with 4 bolts from the top, with a wide mounting surface for much more rigidity over other models in this size range. 3 Bolt Head Mount is now standard, for more rigidity when milling. 001 Readings on X and Y axis dials, with 10 threads per inch Leadscrews make it easier to cut accurately. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. Table Size 7-1/8″ x 27-1/2″. X Axis Travel 19. Y Axis Travel 7. Z Axis Travel (Head) 13. Max Drilling Capacity. Spindle Taper R8. Max Face Milling Capacity. 1/2″ (use 12mm or 7/16″ T Nut Clamping Kits to fit). Range of Spindle Speeds. Main Motor Horsepower – 1 HP. Voltage / Phase / Amps – 120 Volts, SINGLE Phase, 10 Amps. Approximate Machine Weight – 300 LBS. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-25-MV VERTICAL BENCH TOP MILLING MACHINE, 3 YEAR WARRANTY FREE SHIPPING” is in sale since Friday, June 24, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, to Canada.

• Brand: Precision Matthews
• MPN: PM-25MV
• Country//Region of Manufacture: China

Jet JMD-18 Mill/Drill CNC Conversion with Cabinet Stand. 11 piece R8 collet set 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4. 10 PC 4 flute HSS end mill set 3/16″x3/8″, 1/4″x3/8″, 5/16″x3/8″, 3/8″x3/8″, 7/16″x3/8″, 1/2″x1/2″, 9/16″x1/2″, 5/8″x5/8″, 11/16″x5/8″, 3/4″x3/4″. 58 piece clamp down set. Table T-Slot size: 5/8. Stud size: 1/2-13. Includes: 24 studs (4 pieces of each 3″, 4″, 5″, 6″, 7″, 8″ long), 6 step block pairs. 6 T-nuts, 6 flange nuts, 4 coupling nuts, 6 end hold-downs, Wall case. Adjustable Wrench with Measuring Scale, 10″ Overall Length, 1-3/8″ Jaw Capacity. 1/2 Square Drive High-Torque Ratchet Wrench. High-Torque Grip-Plus Combination Wrench, 3/4″ Size, 11″ Long. 1 Quart of MOBIL Vactra Way Oil #2. Swivel Leveling Mount, Nickel-Plated Steel, with Pad, 1/2″-13 x 4″ Long Thread, 3750 lb. High-Strength Grade 8 Steel Cap Screw, 3/4″-10 Thread, 6″ Long, Zinc-Plated. Zinc Yellow-Chromate Plated Steel Hex Nut, Grade 8, 3/4″-10 Thread Size, 1-1/8″ Wide, 41/64 High. Zinc Yellow-Chromate Plated Steel Flat Washer, Grade 8, Oversized, 3/4″ Screw Size, 0.812″ ID. JET Tools JMD-18 & JMD-18PF Operator’s Instructions and Parts Manual. I had intended to change it back to a manual mill and then sell the CNC components as I know very little about operation of CNC machinery. Let alone the software and hardware side. And before learning that the exorbitant prices of Jet OEM parts would make it cost prohibitive to convert back to manual. The machine appears to have been well maintained. I put a 110 plug to test out the motor. It looked to have to been hard wired, possibly to 220. It is very quiet and all the belts are in good shape. The X and Y axis have what appear to be some nice adjustable double ball nuts that have zero backlash when turned by hand. And the Z axis has a gas shock maintaining downward pressure also leaving zero backlash. The table has one spot were it looks like someone walked away from the machine while it was running, otherwise in good condition. I do not know what kind of software is needed to run this machine. The machine did not and does not come with a computer or data cables. Hopefully the photo of the “Geckodrive” cards can give some insight into what software is compatible for this machine. Feel free to ask any questions. 41″w x 39″d x 72h approximately. The item “Jet JMD-18 Mill/Drill CNC Conversion With Stand And Tooling Milling Machine” is in sale since Thursday, June 30, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “plastic_organic” and is located in Los Angeles, California. This item can’t be shipped, the buyer must pick up the item.

• Brand: Jet
• MPN: JMD-18
• Country/Region of Manufacture: Taiwan
• Model: JMD-18

Kearney and Trecker Horizontal Milling Machine. Table size: 9″ x 46″. 35 – 1400 RPM’s. 220V 3 Phase Power. Comes with Vertical Milling Head Attachment. This machine was used in our fab shop for one specific job and we are no longer doing that job and have no use for this machine. This machine was great, we never had any issues with it. We never hooked up the vertical head attachment. No tooling or vises are included in the sale of this machine. We will assist in loading this machine on a truck if necessary. The item “K&T- Kearney & Trecker Model H Plain Horizontal and Vertical Milling Machine” is in sale since Tuesday, May 03, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “bigtoolpoole” and is located in Anaheim, California. This item can’t be shipped, the buyer must pick up the item.

• Brand: Kearney and Trecker
• MPN: Model H