This Listing is for a. This is a very high precision milling machine. There are no shortcuts taken with these machines, they are absolutely top of the line! Here are some features of this milling machine. High Grade Meehanite Castings, High Grade of Cast Iron, Meehanite / Grade 250 (FC250/HT250). Cast Iron, ribbed for rigidity and strength. Be sure to ask if comparing with others. This one is 1 phase, 220 Volts, If you need Single phase. Entire Milling Head and Main Motor are made in Taiwan – only very high quality units used on. Hardened and Ground table and way surfaces greatly reduces wear, which maintains accuracy, and greatly extends machine life. Box Ways on Y axis means more surface area, and more rigidity. Massive 20 Wide Saddle, for extra table support. Turcite B way material on X and Y Axis for smoother table movements and longer machine life. Compare with others, you will notice the feel right away in the table handles. Head Swivels Left and Right, AND Tilts Front To Back. One Shot Lubrication system is standard equipment, which also extends machine life, and reduces. Oiling times of all way surfaces and lead screws to seconds, it is accomplished by simply pumping. High precision Inch Pitch lead screws, for ease of use and greater accuracy (5TPI Screws). High Precision Spindle with +/. 0002 or less runout for greater tool life and accuracy. Balanced pulleys in head for smooth and quiet operation. Full featured head with automatic quill feeds in 3 steps for boring operations. Precision Honed Quill Bore for tighter tolerance fit, which leads to improved accuracy when. Drilling and precision boring. Power Down Feed on quill is standard, in 3 steps. 006 Inches per revolution. Quill is Precision Ground, then Hard Chrome Plated for even longer life. Available with either step pulley speed changes, or variable speeds to suit the user’s preferences. Built in coolant sump in machine base. Tolerance Test Certificate included, each machine is checked for accuracy through a careful. Quality machine that exceeds their expectations. Normal wear items such as belts, bushings, etc. Table Size 9x 50. X Axis Travel 30 with power Feed Installed, with Full Way Support (Not over-traveled past ends of ways). Y Axis Travel 12. Z Axis Travel (Knee) 18. Distance, Spindle to Table 18. Leadscrew Type Precision Ground ACME Leadscrew W/ Double Nut Backlash. Adjustments on X and Y Axis. 200 (5 Threads Per Inch). Spindle Speed Range 70- 4200 RPM (variable). Speed Change Type Variable Speed/ Hi-Low Lever. Spindle Bearing Type High Precision Tapered Roller Bearings, Fully Adjustable. Spindle Bearing Class C7. Overall Height, Head Up 87. Height with head down For moving. Depth Front to back, rear of machine to front of knee casting 46. Rear of machine to tip of Y axis handle 51. Width X Axis Table Handles, Tip to Tip 68. Machine Weight 2550 LBS. Voltage / Phase 220 Volt 1 Phase, 20 Amp Circuit. Or if you would like you can pick it up at our location in Pittsburgh. If you would like to stop in and see one in person, we are at. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. THIS MACHINE IS NOT ABLE TO BE DELIVERED WITH A LIFT GATE. Check out our other auctions for more lathes and mills. The item “PM-950V VERTICAL KNEE MILL MILLING MACHINE 3 AX DRO, X PWR, 1PH FREE SHIPPING” is in sale since Thursday, August 24, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States.

• Brand: Precision Matthews
• MPN: PM-950V-1PH
• Model: PM-950V-1PH

FROM ALL OF US HERE AT CENTRAL PENN MACHINERY, HAVE A GREAT DAY! Nice Bridgeport J head mill machine. Has a power feed on the x axis, a 1 shot lube system, power feed quill, and a Trak 2 axis digital readout. It has the tibon hardened ways and they are in good condition. It has less than 40 thousandths backlash on the x and y. The tibon hardened ways are in very good condition. Machine has a nice clean table with no major drill marks. WE WILL BE GLAD TO DO WHAT WE CAN TO ASSIST. PRICED TO SELL, BUT FEEL FREE TO MAKE US A REASONABLE OFFER!!!!! The item “Bridgeport 9×42 Milling machine DRO, POWER FEED, TIBON WAYS, GOOD TIGHT MACHINE” is in sale since Wednesday, September 13, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “centralpennmach” and is located in Lebanon, Pennsylvania. This item can be shipped to United States.

• Brand: Kondia
• Country/Region of Manufacture: United States
• Model: 9×42 model G

BROWN & SHARPE VERTICAL MILL #2. Differential Indexer (5 Axis Positioning) Included. With #40 NMTB Holders (see picture). Used / Tested and Currently Running. Have owned since 1983. Spindle Speed 50-1800 RPM. 208 Volt 3 Phase. Operation and Maintenance Manuals. Repair Parts Manual. 66″W x 73″L x 84H. Or any other safety standard, and is held harmless regarding any cost resulting from non-compliance. The item “Brown Sharpe Universal Mill #2 With Indexer and Extras” is in sale since Tuesday, December 13, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Other Mfg & Metalworking”. The seller is “harfordmachine” and is located in Aberdeen, Maryland. This item can be shipped to United States.

• Brand: Brown & Sharpe
• Model: #2 Vertical Mill 3 Horsepower
• MPN: 503-23-23
• Country/Region of Manufacture: United States

8″x28″ Bench Milling & Drilling Machine R8 Spindle 2HP 1PH 110/220V NEW. Base Stand not included in Price. Versatile and multi-purpose machine can be used for drilling, milling and even tapping. Has features of many larger mills, sturdy construction, headstock swings 360° and moves up and down on column to meet various job requirements, R8 taper spindle, bronze adjustable leadscrew nuts, large cast tables with T-slots, heavy duty tapered roller bearings to support the spindle, hinged belt cover allows speedy belt changes, satin finish easy to read dials, positive easy to read depth gauge. Manual reversing switch, tilting vise, shell end mill cutter, cutter arbor, 1/2 drill chuck, drill chuck arbor, service tools and instructions. 2HP, 110V/220V, 1PH Prewired 110V. Bench Milling & Drilling Machine. The item “8×28 Bench Milling & Drilling Machine R8 Spindle 2HP 1PH 110/220V NEW” is in sale since Saturday, August 19, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “candido6705″ and is located in Warren, Michigan. This item can be shipped worldwide.

• Brand: PRM
• MPN: RL80RF311
• Model: RL80RF311
• Country//Region of Manufacture: China

Pro Tram System (Model: 01-000). Square the head of a milling machine quickly and easily. To use the Pro Tram simply lower unit to the table and adjust the head until both indicators read the same. Guaranteed to be equal to or better than any other tramming method or spindle squaring device available. Sized perfectly to fit the bed of a 6 vise allowing the head to be trammed to the vise instead of the table. Can be used with a sine bar or sine plate to adjust the head to precise angles. Calibration procedure accounts for any error introduced by worn collets. Indicator graduations available in 0.001″ and 0.0005″. Shank sizes available in 1/2″ and 3/8″. Large 2.2 easy to read indicator face. Indicator repeatability of 0.0002. Body made from red anodized aluminum. Includes calibration gage, manual and padded case. Also available is our Mini Pro Tram System designed specifically for smaller Table Top and Mini mills. The Pro Tram by Edge Technology makes the process of tramming your mill fast, easy and accurate. Tramming is the process of squaring the head of your milling machine to the table. The Pro Tram is sized to fit the bed of a 6 vise allowing you to tram directly to vise for increased accuracy. It can be used with a sine bar or sine plate to adjust the head to precise angles. Protected by one or more US patents. Please request a package invoice before you pay. We guarantee that the Pro Tram System will allow you to tram your machine with the same or better accuracy as compared to conventional tramming techniques. We also guarantee that you will be able to complete the tramming procedure with less time and effort. Related Products by Edge Technology Products. Please take a moment to check out the other high quality machinist gages and tools that we offer. The item “Pro Tram Bridgeport Head Square Knee Mill Spindle CNC Router milling endmill #01″ is in sale since Thursday, August 31, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “edge_products” and is located in Tucson, Arizona. This item can be shipped worldwide.

• Brand: Edge Technology
• MPN: 01-000
• Model: Pro Tram System 1/2″ Shank – 0.001 Graduation
• Used With: Bridgeport Mills CNC Router Knee Mill Endmill
• Used For: Tramming or Square Spindle milling machine head

Up for sale is a. Brainard Standard #5 Universal Horizontal Mill w/ Hydraulic Vertical Head 6″ x 28″ Table. This unit has a Bellows Scholin Carbi-Drill CD2665-1 vertical head with a 2HP 220/440V 3-phase motor. When requesting a quote please include the following information as it will impact the amount of the quote. Zip code of where the item is to be delivered. Is the address a commercial or residential address, and. Is there a dock or forklift available at said address? The item “Brainard Standard #5 Universal Horizontal Mill with Hydraulic Vertical Head 6x 28″ is in sale since Monday, July 25, 2016. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “steelcoasttrading” and is located in Lorain, Ohio. This item can be shipped to United States.

• Brand: Brainard
• MPN: Standard #5 Universal Mill

Tree Journeyman 310 CNC Knee Mill Tree with Dynapath 20M CNC Control. TREE JOURNEYMAN 310 3 AXIS CNC KNEE MILL. 2HP AC Two-range spindle drive, Infinitely variable speed ranges 60-4200 RPM. Hardened and ground box ways mated to Turcite for stick-slip freedom and long accurate life. Split-screen graphics show top and side, or top and front views. Dynapath 20M (Conversational and offline G code programming, Drip feed capability). Tape Cassette and RS232C. 60,000 Characters standard. Machine Travels (X/Y/Z) 27 / 14/ 5.5. Knee Travel 15.75. Spindle to Table Distance 18 ¼. Spindle Center to Column Distance 14.1. Table Size 10 x 44. Speed Range 60 4200 rpm. Rapid Traverse Rate (X/Y/Z) 250 IPM. 1 to 100 IPM. Axis drive (DC servo motor) 1700 lbs. Drilling capacity (mild steel) 0.75 Diameter. Milling Capacity (mild steel) 2.0 cu. Floor area (doors open) 94 x 72. Power Requirements: 230 Volts/ 3PH/ 60 Hertz/ 30amp. Can Be Seen Under Power in our Downtown Louisville, KY 40203 Location! Glen at amerigomachinery dot com or 5024198183. The item “Tree Journeyman 310 CNC 3 Axis Knee Mill Tree with Dynapath 20M Control 30 taper” is in sale since Tuesday, September 05, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “cncmachineguy” and is located in Louisville, Kentucky. This item can be shipped to United States.

• Brand: Tree
• Model: Journeyman 310

Used Rong Fu Arfa RF-31N2F Mill/Drill for sale. Serial#: 232978 New in 2002. 1 HP motor, 220V Comes on stand. Uses R8 collets and comes with drill chuck. Check out my other items. AS IS, WHERE IS. 2 WEEKS TO CLEAR BEFORE ITEM IS RELEASED. INTERNATIONAL SALES MUST BE PAID BY WIRE TRANSFER. NO CREDIT CARDS ACCEPTED. NO CHARGE TO LOAD ON TRUCK IF UNDER 7,500 LBS – IF OVER ADDITIONAL CHARGES APPLY. Used machines may not incorporate approved activating mechanisms, operator safety devices, or safety guards, as required by OSHA or otherwise. It is the purchasers responsibility that the said used machines be so equipped and safe-guarded to meet OSHA and other requirements before placing such machinery into operation. The covenants expressed herein shall be servable, and the invalidity, now or in the future of any of the covenants recited. Herein shall not affect the validity of the remaining covenants. Under no circumstances shall we or any affiliate of ours have any liability whatsoever for the loss of use or for any indirect or consequential damages. The item “Rong Fu Arfa RF-31N2F Mill/Drill” is in sale since Wednesday, April 01, 2015. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “0030777″ and is located in Warminster, Pennsylvania. This item can be shipped to United States.

• Brand: Rong Fu
• MPN: Does Not Apply