I have a very nice MAHO MH700 universal manual milling machine up for sale. It is in great shape. If Bridgeport is the standard by which mills are judged, this is like a Ferrari. It has a very small footprint but is very stout, well built, and has many desirable features. The machine comes with power feeds in all three axis (x, y, and z). It has a universal table that both tilts and rotates. Table may have come off an ACIERA mill it is not OEM. Vertical and horizontal milling capability(horizontal arbor and support not included). Vertical spindle is MT4 with 5/8-11 male drawbar. Horizontal Spindle is MT4 with s20x2 female drawbar (OEM). Separate two speed power feed motor (hi/low). Infinitely variable power feeds in each direction. HEIDENHAIN VRZ 775 three axis DRO + owners manual. Import rotary table and 3 jaw chuck+key. New set of collets. New Drill chuck + key. New LED work light. Please ask any questions before making an offer. I have a forklift to assist in loading. The machine is very nice and works great. There are a few minor issues as would be expected with a machine of this vintage. The rapid traverse lever does not function as it should. I’ve never used the rapid traverse. Each power feed can be reversed simply by shifting its corresponding lever to the opposite direction. The infinitely variable power feed H drive clutch sometimes slips in the highest speed. All other speeds work fine. Spend some time and put the machine through its paces. It is almost impossible to list every detail of the machine and how it functions. There will be wear as would be expected of a machine of this age. Please ask questions before making an offer. The item “MAHO MH700 Universal Mill Milling Machine KURT vise HEIDENHAIN dro, rotary table” is in sale since Thursday, November 30, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “lectrician1″ and is located in Las Vegas, Nevada. This item can’t be shipped, the buyer must pick up the item.

• Model: MH700
• Brand: MAHO

BRIDGEPORT 1HP VERTICAL MILL. – 9″ X 42″ TABLE. – WGT: 1,795LBS. SUBJECT TO PRIOR SALE. Please contact De or John with any questions. The item “BRIDGEPORT 1HP VERTICAL MILL” is in sale since Friday, December 01, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “mckean2002″ and is located in Brook Park, Ohio. This item can be shipped to United States.

HAAS VF3 Serial #11088. New backup battery set. Pay check , wire transfer only. More info 630 400 2231. The item “HAAS VF3″ is in sale since Friday, September 29, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “rex40630″ and is located in Bensenville, Illinois. This item can’t be shipped, the buyer must pick up the item.

Haas TM-1 CNC Toolroom Mill. Model#: TM-1 Toolroom Mill. Control Haas 32 Bit CNC Control. Table Size 10.5″ x 47.75″. Spindle Taper Cat 40. Spindle Speeds 0 – 4,000 RPM. Rapid Traverse (X/Y/Z) 200 IPM. Table Load 1,000 Lbs. Spindle Drive 7.5 HP. Haas 32Bit CNC Control, Rigid Tapping, Coolant Tank & Pump, 10 Station Automatic Tool. 208 Volt, 3 Phase 240 Volt, Single Phase. Approximate Machine Dimensions: 87″L x 62″W x 109H. Approximate Weight: 3300 lbs. The item “Haas TM-1 CNC Toolroom Mill” is in sale since Monday, August 21, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “machinesused” and is located in Minneapolis, Minnesota. This item can’t be shipped, the buyer must pick up the item.

• Brand: Haas
• Model: TM-1

Machine is in great condition, low hours and under power for inspection if needed. No tooling or vices pictured are included. Cashiers check, bank transfer, machine will not be loaded until funds have been verified. Here’s a link to machine running. LENGTH (WORK SURFACE): 28.75. MAXIMUM WEIGHT ON TABLE: 500 LBS. NUMBER OF T-SLOTS: 3. CENTER DISTANCE: 4.92. TAPER SIZE: # 40 TAPER. SPEED: 0 6,000 RPM. SPINDLE NOSE TO TABLE TOP: 4 14. TOOL DIAMETER: 3.5. TOOL WEIGHT: 12 LBS. DOOR OPENING WIDTH: 24. MACHINE WEIGHT 3,400 LBS. AIR REQUIRED: 4 SCFM, 100 PSI. FOOTPRINT: 78 X 80 X 98 H. ELECTRICS: 208 VOLTS, 3 PH, 60 CYC. The item “Haas Mini Mill, VMC Verticle Maching Center, Low Hours, USB” is in sale since Monday, November 27, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “foxholsters” and is located in Sterling Heights, Michigan. This item can be shipped to United States.

• Brand: Haas
• Model: Mini Mill

Burke Tool Gun Smithing Horizontal Milling Machine on solid rolling Cart. Tested and in good working order. No binding or problems and motor runs strong. Hard to find a compact unit like this, perfect for small shops. My goal is 5 Star Service to you and that you are 100% Happy. Thank you for looking and your business. Track Page Views With. Auctiva’s FREE Counter. The item “Burke Tool Gun Smithing Horizontal Milling Machine Tested Good Working Order USA” is in sale since Sunday, November 12, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “arthurdan” and is located in San Antonio, Texas. This item can be shipped to United States.

• Brand: Burke
• Model: Horizontal Milling Machine
• Country/Region of Manufacture: United States
• MPN: Burke Milling Machine

Tested working Atlas horizontal milling machine in used condition. This is a nice compact bench top milling machine typically used by gunsmiths, model engine and train enthusiasts, hobby/home machinist, and sometimes found in machine shops being use as a keyway cutting machine. These machines work great for what they were intended to do, and as long as you do not need something in a hurry and try to overwork it, it should last a long while. The previous owner painted it a green color and that paint is flaking off, leaving behind some of the original grey. Comes with 7/8 arbor, small vise, and a few cutters. I have owned a few of these over the years and used this mill for about 4 hours and just want to be thorough in my listing and tell you everything that I noticed, I may not have seen everything but I did do a somewhat thorough investigation into its condition. The side belt cover is there but the swivel ears are repaired and may continue to hold but they may not. The side belt cover needs to have a latch of some sort as it will move in towards the belt during operation. The top belt cover has a crack at the one corner, it does not seem to affect anything but want to tell you it’s there. The powerfeed direction lever was repaired at some point and worked as it should while I was using it. The feeds do have some play as with most of these mills you will find. The drawbar is not original but seems to work like it should. The mid plate has a broken corner(see one of the pics with finger pointing). There are a couple knobs/handles that have been replaced by a shop found item. One feed handle is broken off (motor side). It ran like it should and cut as good as I would expect for the capabilities of a machine this size. If you have any questions please shoot me a message, just do not wait until last minute and expect me to get back to you in time. This item is for sale locally and I reserve the right to cancel this listing at any time. The item “Atlas MFC Mill Horizontal Milling Machine Machinist Tool Bench Top” is in sale since Wednesday, November 15, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “zwmcquig” and is located in Yorktown, Virginia. This item can be shipped to United States.

• Brand: Atlas
• Model: Horizontal Milling Machine
• Country/Region of Manufacture: United States

Ghost Gunner is specially designed to manufacture a growing library of mil-spec 80 percent lowers to completion. No prior CNC knowledge or experience is required to manufacture from design files. Legally manufacture unserialized rifles and pistols in the comfort and privacy of home. Includes full manufactures kit, All the tools to complete an 80% lower and the AR-15 USB stick with software information. Ghost gunner walks you though step by step how to complete within the software on completing the lower. The item “2016 Ghost Gunner 2 CNC Machine, with AR-15 jigs and recent software Mil machine” is in sale since Sunday, December 03, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “macservices202″ and is located in Washington, District Of Columbia. This item can be shipped to United States.

• Brand: Defense Distributed
• Model: GG2
• Country/Region of Manufacture: United States
• Bundle Listing: No

I have a Tormach that is about a year old. They do not come out for service. This unit has 6hours of milling use. Let me know if you have any questions. 4th axis(still in crate). Swinging table for monitor and keyboard. Dual head Fog buster. Lakeshore carbide end mills. The item “Tormach 1100 series 3 cnc machine” is in sale since Saturday, December 02, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “smartbrotha2008″ and is located in Denton, Texas. This item can’t be shipped, the buyer must pick up the item.

2008 HAAS VF-3B CNC Vertical M achine Center. Previously used at a local machine shop making aluminum parts. Powerful 20-Horsepower 2-Speed Geared Head Spindle Motor. 7,500 RPM Spindle. 1,000 IPM Rapid Traverse. 24+1 Dual Arm Side Mount Automatic Tool Changer. Remote Manual Pulse Generator/ Handle Jog Control. Coordinate Rotation and Scaling. Renishaw Wireless Probe System. Spindle Nose to Table (min). Spindle Nose to Table (max). Number of Std T-Slots. Max Weight on Table (evenly distributed). Max Torque w/opt Gearbox. Max Tool Diameter (full). 113 L/min, 6.9 bar. Power (options may increase requirement). 195-260 VAC/50 A 354-488 VAC/30 A. 3605 mm x 3048 mm. Specifications subject to verification. Items over 12,000 lbs. We will not palletize, skid or crate an item over 1000 lbs. These items are prepared for transit by wrapping the item’s electrical components with stretch wrap and spraying down any exposed metal surfaces with protective oil. These items exceed our forklift’s capacity. These movers will be using specialty equipment which increases the cost of their service. We may charge more in the case of items located outside our showroom. M ACHINE DIMENSIONS: 142″ x 110″x 119H. Plus chip / coolant pan. MACHINE WEIGHT: 12,500 lbs. We accept all major credit cards except American Express. Orders are not processed until theyre paid in full. The item “2008 HAAS VF-3 CNC MILLING MACHINE 40×20 Mill, 4th-Axis Ready, Renishaw Probe” is in sale since Wednesday, October 18, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “p20933b” and is located in Chatsworth, California. This item can be shipped to United States.

• Brand: Haas
• Country/Region of Manufacture: United States
• Model: VF-3B
• Year of Mfg.: 2008
• Serial No.: 1068271