Please make sure the OE number matches the part you are replacing. We will send item to your. International Buyers Please Note. If your package delayed few days, due to any unexpected factor, please wait patiently. Your kindly understanding and great patience would be highly appreciated! For a presumably defective product received, please tell us where the problem occurs, and our Customer Service and Technical Department will work it through with you. Pictures and videos can come in handy here. We wish you understand us, and our effort will always come to your aid. Customer Service got fired if they don’t work things out with you, so knock their door at will. There shall be nothing to worry about as we have confidence to solve your issue. We greatly appreciate your. Do NOT leave negative or neutral feedback without any contact.

2012 HAAS VF-2 CNC Vertical MACHINING CENTER Mill Milling Machine 30,000 RPM, RENISHAW. Have two warehouses full of used equipment and tooling, and always getting new inventory.

This Haas VF2SS milling machine has been expertly cared for and maintained, showcasing a near-new appearance that reflects the utmost attention to detail. Machine has been kept in working condition and used primarily for machining aluminum. Everything works properly and smoothly. The motor runs without any hiccups and the spindle sounds perfect. Functions on 220-260v 3-phase only with an 80-amp breaker. X Axis Travel: 30. Y Axis Travel: 16. Z Axis Travel: 20. Rapid Rate X Axis: 1,400 IPM. Rapid Rate Y Axis: 1,400 IPM. Rapid Rate Z Axis: 1,400 IPM. Table Size: 36″ x 18″. Max Table Load: 1,500 LBS. Spindle Motor: 30 HP. Spindle Speed: 12,000 RPM. Spindle Taper: 40 BT. Tool Changer: 24 ATC. Max Cutting 833 ipm. Max Weight 1500 lb. Max Thrust X 1995 lbf. Max Thrust Y 1995 lbf. Max Thrust Z 3085 lbf. Chip-to-Chip 3.6 s. Coolant Cap 55 gal. Amps 3 Phase 35A (High). Dimensions: 106″ x 101″ x 101. Weight: 7,800 LBS.

This machine is in great condition with no issues. It is all original paint. All of the axis sound great as well as the spindle. The machine is tight. If your local and would like to come see this machine in person I can power it up for you. Once it leaves my possession I’m no longer responsible for it. I do have a forklift on site and can load for you. I took a VERY DETAILED video of me operating this machine the day I posted this ad. Please watch that video by clicking on the video like in this box. I do have this machine posted on other platforms and reserve the right to remove at any time if I sell on one of those platforms. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “admoi-13″ and is located in this country: US. This item can be shipped to United States.

• Brand: Fadal
• Function: Milling
• Control: CNC
• Model Year: 1994
• Machine Type: Machining Center
• Power Source: Electric
• Voltage: 240 V
• Model: Fadal VMC 15
• Spindle Taper: CAT 40

Table Width x Length. 19.7″ x 47.2″. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “act4machinery” and is located in this country: US. This item can be shipped to United States.

USED RENISHAW PRESETTER TS27RB / RP2 PROBE UNIT. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “elitetooling” and is located in this country: US. This item can be shipped to United States.

2019 TM-2P (Manf 12/18). WIPS (Renishaw probe and tool setter). This machine will fit under a 7′ garage door with the base risers removed. Business has grown and this machine just doesn’t get utilized as much. We are looking to add a Y axis lathe which will hopefully sit where this machine currently does. Under power and available for inspection. Still run parts on it occasionally. Still has plenty of trial time of HSM and RT. Only has had Qualichem 251C in it. This machine got me started and did not disappoint. Videos of spindle, axis, and tool changers available. No tooling or work holding included. Located in Fairfield Ohio (Cincinnati). Can recommend local rigging companies. The item “HAAS 2019 TM-2P 20 TOOL CNC VERTICAL MILL NGC RENISHAW PROBES SINGLE OR 3 PHASE” is in sale since Thursday, July 29, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “pnptechworks” and is located in Fairfield, Ohio. This item can’t be shipped, the buyer must pick up the item.

• Spindle Horsepower: 7.5
• Machine Type: Vertical Milling Machine
• Spindle Taper: CAT 40
• Z-Axis Travel Bed: 16 in – 20 in
• Brand: Haas
• X-Axis Travel Bed: 36 in – 40 in
• Function: Milling
• Model Year: 2019
• Control: CNC
• Max Spindle Speed (RPM): 6000
• Voltage: 220 V
• Model: TM-2P
• Y-Axis Travel Bed: 16 in – 20 in
• Country/Region of Manufacture: United States

2016 Haas DM-1 Vertical Machining Center. Total run time and tool changes pictured will increase do to machine still being used in production. Machine is listed in other market places so this ad may end without notice. Machine includes the following specs and options. Z Axis: 15.5. 20 x 16 x 15.5. 15 hp vector drive. 15,000 rpm spindle. High-speed 18 + 1 side-mount tool changer. Power failure detection module. 1 MB program memory. Renishaw wireless intuitive probing system, includes macros, spindle orientation, coordinate rotation and scaling. 15 color LCD monitor. Rear chip lift auger. 45-gallon coolant tank with ¾ hp flood-coolant pump. 4th-Axis Drive, Wiring, and Rotary indexer. Atlas 16C Pneumatic Collet Chuck. Haas 160 mm (6.3) Dual-Spindle Rotary Table. Haas Through-Spindle Coolant system provides up to 300 psi of coolant to the cutting tool. Machine Weight: 5,500lbs. We will load machine uncrated onto flat bed trailer between the hours of 8 a. Fri with a 72hr notice at no additional cost. 420 Industrial Park Dr. The item “2016 HAAS DM-1 Vertical Machining Center, 15,000rpm Spindle, Renishaw Probe” is in sale since Thursday, February 18, 2021. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “werecommerce” and is located in Gladstone, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Model: DM-1
• Spindle Horsepower: 15 hp
• Machine Type: Machining Center
• Max Spindle Speed (RPM): 10001 – 15000
• Model Year: 2016
• Power Source: Electric
• X-Axis Travel Bed: 16 in – 20 in
• Y-Axis Travel Bed: 16 in – 20 in
• Z-Axis Travel Bed: 10 in – 15 in
• Spindle Taper: CAT 40
• Function: Milling
• Brand: Haas
• Control: CNC

Doosan DNM 4500 VMC, 2019 – Renishaw, 4th Axis Capable, 12,000rpm, 30ATC, CAT 40 spindle. Under 86hrs of run time! Only machined Copper/ Aluminum material. Synthetic Coolant Used by Quaker/Houghton HOCUT WS8065. Renishaw Optical tool Setter and table mount with Cat-40 T/S Calibration Master. 8 – CAT40 for ER32 Tool Holders & 1- CAT40 ER25 Holder with pull studs. Henning Right Side Chip Conveyor with a 2 stage chip filter for coolant tank and Oil Skimmer. Machine is lubricated by a Auto Grease cartridge System (3/4 of the cartridge is Left for use). Thu-Spindle coolant & 3 Flood Coolant nozzles. 100 Gallon Coolant Tank. Hand Held Operator (Magnetic base) It can be placed any where on machine for easy vise/fixture set ups. Operators Keys for CNC controller. Table size : 450 mm x 980 mm or 17 3/4in x 38in. Rapid G00 speed up to 1400 IN per MIN. Easy access to machine and over head door. Door is 12ft wide x 13ft tall. The item “Doosan DNM 4500 VMC, 2019 TSC, Renishaw, 4th Axis, 12,000rpm, 30ATC” is in sale since Wednesday, August 26, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “smtw2018″ and is located in North Vernon, Indiana. This item can be shipped to United States.

• Brand: Doosan
• Model Year: 2019
• Machine Type: Vertical Milling Machine
• X-Axis Travel Bed: 36 in – 40 in
• Max Spindle Speed (RPM): 10001 – 15000
• Function: Milling
• Voltage: 230 V
• Table Length: 35 in – 39.9 in
• Z-Axis Travel Bed: 16 in – 20 in
• Y-Axis Travel Bed: 16 in – 20 in
• Table Width: 15 in – 19.9 in
• Spindle Taper: CAT 40
• Spindle Horsepower: 25 hp
• Control: CNC