THIS LISTING COMES WITH A STAND. IF YOU WOULD LIKE A MACHINE WITHOUT THE STAND, PLEASE SEE OUR OTHER LISTING. 6 Speed Geared Head, with all Hardened and Ground Steel Gears for. This machine uses 120V Standard Power! Highlights Of This Machine. All Hardened and Ground Steel Gears in head, for much heavier. Cutting capability, particularly when compared with plastic gear equipped models. Compact Size for smaller work shops, but has more weight and power to. Remove material when needed. 001 on X and Y with a true Inch Pitch. Leadscrew, leads to easier operation when tolerances matter. Main Column is attached to the base with 4 bolts from the top, with. A very wide mounting surface for much more rigidity over other. Models in this size range. Only Requires Standard 120V Single Phase Circuit, so it can be. Set up virtually anywhere, without needing additional circuits. Installed in your work shop. Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range Spindle is Supported by High Precision Tapered Roller Bearings Mill Head May be Tilted ±90° (both left and right) Precision Manual Fine Down Feed is standard Adjustable Tapered Gibs for longer life Positive Locks are standard for Table, Head, Quill, and Column Easy Reading Dials Have Satin Chrome Finish, Graduated in. 001 Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from mm/inch Generous 18-1/4 Spindle To Table Max Distance for taller work 8-1/2 Y Axis Travel, More than other machines in this class. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help. End Milling Capacity: 1. Face Milling Capacity: 3. Table Size: 27-1/2 x 7-1/8. Cross Travel (Y Axis): 8-1/2. Longitudinal Travel (X Axis): 15. Table Leadscrew Pitch 10 TPI. Vertical Travel (Z Axis): 16. Max Distance Spindle to Table: 18-1/4. Taper of Spindle: R-8, w/7/16-20 Drawbar Thread. Spindle (Quill) Travel: 3. T Slot Size: 1/2T Slots are slightly less than 1/2, actual size 12mm, our 1/2 kit. Is sized for this machine. Range of Spindle Speeds: 115 – 1,700 RPM, 6 STEPS. Head Tilt: Left & Right ±90°. Net Weight (WITHOUT STAND): 475 LBS. Net Weight (WITH STAND): 575 LBS. Power Required: 110/120V, Minimum 15 Amp Circuit. Dimensions: 39W x 70H x 30D. Height with head at top of Z travel: 76 (On Stand). Height with head at normal working height: 71 (On Stand). NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. Check out our other auctions for more lathes and mills. The item “PM-727-M VERTICAL BENCH TOP MILLING MACHINE WithSTAND, 3-AXIS DRO FREE SHIPPING” is in sale since Monday, June 25, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “qualitymachinetools” and is located in Pittsburgh, Pennsylvania. This item can be shipped to United States, Canada.

• MPN: PM-727M W/DRO and STAND
• Brand: Precision Matthews
• Country//Region of Manufacture: China

General Info: Stock #: SB-181045 Location: Stone Mountain, GA Brand: Millport Model: 2S Serial #: 84894S Year: 1984 Approx. Check out the video on the listing to see it in operation. The ways are pretty worn down. Also, it does not like to run in low speed gear setting. We are glad to show under power. Video will open in a new window. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for this listing 7 days a week. Purchaser shall pay The Equipment Hub a late penalty on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. The Equipment Hub SHALL NOT BE RESPONSIBLE FOR THE CONSEQUENCES OF PURCHASER’S FAILURE TO INSPECT THE EQUIPMENT OR MERCHANDISE OR FOR ANY INACCURACIES, INSUFFICIENCIES, OR OMISSIONS IN SUCH DESCRIPTIONS, SAMPLES, TOLERANCES AND/OR SPECIFICATIONS. The employees or representatives of The Equipment Hub are not authorized to make any statement or representation as to the quality, character, size, condition, quantity, etc. Of the equipment and merchandise offered for sale inconsistent with these Terms and Conditions. Any such statements made will not be binding on The Equipment Hub or be grounds for any subsequent claim. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed and excluded from this agreement. Care is taken to give reliable descriptions but these are not guaranteed and prospective purchasers are advised to check vital details. We also reserve the right to correct any stenographic errors. All specifications and descriptions of said goods are approximate only. THE WARRANTIES DISCLAIMED HEREUNDER INCLUDE, BUT ARE NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No salesman or other representative of The Equipment Hub has authority to make any warranties. It is Purchaser’s responsibility to inspect the goods and to ascertain if the specifications, tolerances, descriptions and condition of the goods conform to the Purchaser’s requirements. Purchaser does hereby discharge The Equipment Hub from any and all liability directly or indirectly resulting from the presence of the aforesaid chemicals or materials, including and not limited to any and all liability directly or indirectly resulting from the failure of The Equipment Hub to give more specific warning with respect to individual articles or substances or from the inadequacy of any warning. Suggestions by The Equipment Hub regarding the design, specification, tolerances, use or suitability of the Products are made in good faith but are not binding upon any party and do not give rise to any liability by The Equipment Hub. MODIFICATIONS/ SEVERABILITY: Purchaser acknowledges that these are the only Terms and Conditions of sale, and is intended by the parties as a complete and exclusive statement of the terms of their agreement. This supersedes all prior agreements, written or oral. Any variation from the terms hereof contained in the Purchaser’s acceptance is hereby rejected. The agreement of which these terms are a part can be modified or rescinded only in writing signed by The Equipment Hub. If any provision of the invoice or these Terms and Conditions is determined illegal or unenforceable, it shall not affect the enforceability of any other provision or paragraph of the invoice or these Terms and Conditions. The remedy hereby provided shall be the exclusive and sole remedy of Purchaser and any right to consequential and incidental damages is excluded. The item “Millport 2S 9 x 42 Vertical Milling Machine with Servo 140 Power Feed” is in sale since Wednesday, June 27, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “equipmenthub” and is located in Stone Mountain, Georgia. This item can be shipped to United States.

Atlas 7B Metal Shaper 7 Metal Working Shaper w/ Stand. Obvious signs of use. There is rust, as on the box, it would be easily cleaned up with scotch bright, but I preferred it this way. That being said, what a cool piece of equipment to work on and play with. It is a similar unit to the 7 Klopp that is used by certain youtube presenter. I’m happy to answer any questions, to take specific pictures, and to allow local inspection. I have the manual and parts list. They’re just printouts of an online pdf, but you’re welcome to them. The item “Atlas 7B Metal Shaper 7 Metal Working Shaper with Stand” is in sale since Thursday, July 12, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “test-measurement” and is located in Simsbury, Connecticut. This item can be shipped to United States.

• Model: 7B
• Brand: Atlas

MAXNC-15 that spent an easy life cutting wax and proto foam once and a while. Light usage The unit has no signs of wear. The ways are beautiful the screws were replaced in 2016 and not used since 2017. Comes with parallel port controller and all mechanical componentry shown in the photos. All steppers, drive motor, controller are tested in working order when it was decommissioned in 2017. There is a rotary table that is also included. The rotary table was never used and kept in storage so it has some minor surface rust. This mill is an excellent prototyping mill and ideal for teaching CNC or setting up a benchtop or shop rig. The item “MaxNC-15″ is in sale since Wednesday, May 30, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “suprock_technologies” and is located in Warren, New Hampshire. This item can be shipped to United States.

• Bundle Listing: Yes
• Model: MAXNC-15
• Country/Region of Manufacture: United States
• MPN: MAXNC-15
• Brand: MAXNC

Bridgeport 1-1/2 HP Variable Speed Vertical Mill, S/N 147024, 4200 RPM, 9″ x 42″ Work Table. Located in Brownsville, Texas. The item “Bridgeport Vertical Milling Machine 9×42 Variable Speed” is in sale since Friday, June 22, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “bis6675″ and is located in Brownsville, Texas. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bridgeport

Ghost Gunner is a general purpose CNC mill built upon the Ardunio micro-controller. GG2 takes it name from its second-generation, custom motion-control board, which allows it to operate as a standard CNC machine. GG2 accepts g-code from most CAM post-processors. GG2 unibody spindles are of stainless steel construction with the ER-11 collet system integrated in the shaft. They have increased radial rigidity, precision bearing diameters, and a 10x reduced initial runout specification. Ghost Gunner 2 uses the following DD lower files. AR-15 milspec 80 percent lower. AR-308 (DPMS Gen 1) 80 percent lower. It is also compatible with the following g-code suites. Windows XP+ or Mac OS X+. Larger X and Z possible. Compatible with 20 mm T-nuts. Accepts tools up to 8 mm. 5 V current (max). Can plug into unpowered hubs. See more detailed specifications here. The item “Ghost Gunner 2 CNC Milling Machine” is in sale since Tuesday, July 10, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “usasalesltd” and is located in Raleigh, North Carolina. This item can be shipped to United States.

• Bundle Listing: No
• Model: 2
• MPN: Does Not Apply
• Brand: Ghost Gunner

Used to machine plastics. I can put on your truck with forklift. The item “Bridgeport milling machine” is in sale since Monday, July 9, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “barjoe” and is located in Bronx, New York. This item can’t be shipped, the buyer must pick up the item.

• Model: 1 HP “J” head
• Country/Region of Manufacture: United States
• MPN: 214444 Serial #
• Brand: Bridgeport

CNC Mini Machine Center VMC6030S Weiss 24″x12″ 3 SIEMENS 808D SYSTEM AND SERVO MOTORS. Standard Equipment: 3 Axis Ball Leadscrew made by TPI Robust and precise dovetail guide with adjustable V-ledges free of play Electronic controllable drive Automatic Lubricating System Front door equipped with a safety switch Base designed on two side. Front side with access to the coolant tank. Simens Control System Toolbox & Tools. Full closed loop high precision linear guide. Optional Equipment: Description Item No. CNC Benchtop Machining, it is ideal for schools and training colleges and can easily be moved between rooms. This is best hobby CNC mills, benchtop CNC mills for personal CNC machining works a Small Machining Center and Small CNC Mills Weiss Series is among the most versatile machine tools in the compact class. All models are high-performance centers, which can be set up quickly and are easy to operate, very stable, highly dynamic and low-maintenance. Thanks to the modular structure, there are numerous configuration possibilities. This allows us to customize any basic machine to your needs to achieve a perfect individual solution for you. Your benefit in a compact space: CNC cutting at low unit costs at high processing quality and unique speed. Variety of controller options. You can use a low-cost PC controller to reduce your budget. But also through another CNC system to adapt to any application requirements. In the smallest footprint, the high quality and efficient production. At the same time, you can upgrade the two forms of external protective sheet metal. Machine bed structure can also be used high precision mineral casting parts. Through the important core components to control and upgrade quality. WEISS MODEL VMC 6030S ITEM NO 10222003 Capacity Max. Drilling capacity Ø35 mm Max. End milling capacity Ø20 mm Max. Face milling capacity Ø76 mm Milling Accuracy Positioning accuracy ±0.015mm/300mm Repositioning accuracy 0.015mm Spindle Spindle taper ISO30 Max. Spindle speed 6000 rpm/min Distance from spindle to column 200 mm Mill-Drill Head Z-axis travel 300 mm Feed speed 6000mm/min Cross Table Table 605×305 mm Longitudinal travel(X axis) 355 mm X axis feed speed 6000mm/min Cross travel(Y axis) 305 mm Y axis feed speed 6000mm/min T-slot 3 x 12 mm/63 mm Distance from spindle nose to table 380 mm Electric Supply Motor 2200W 230V/50Hz or 110V/60Hz Coolant pump 40W. Spindle and three-axis full servo control. Bed and milling head for the reinforcement of high-rigidity castings. Spindle synchronous pulley drive system, low power consumption, large transmission. Torque, high cutting strength. Each device is round and laser to detect the equipment to ensure high precision requirements. Spindle specifications BT30, the maximum speed of 8000rpm. Low inertia spindle design, positive and reverse speed. Spindle with domestic spindle, excellent rigidity, to meet the long time heavy load processing, running more smoothly, long life. Three-axis hard rail design, the formation of the best rigid structure, regardless of light, heavy cutting, are greatly enhance the efficiency and stability. Three-axis rapid displacement 6000mm / min, speed up, shorten the processing time. Electrical box is located on the right side of the column, shortening the depth, saving space, and the effective use of space planning. Oversized water tank capacity of 100 liters, greatly enhance the cooling effect when processing. CNC controller, using SIEMENS 808 controller, the operator panel in line with ergonomic design, with three directional positioning design, to provide convenient control features. Minimum command unit: 0.002mm. Rapid displacement speed adjustment. Automatic origin return G28. Work piece coordinate system G54-G59. Fixed cycle G73, G76, G81-G89. Rigid tapping G84, G74. The program is paused. Manual control function: manual rapid feed, jog feed, hand wheel feed. Tool length correction G43, G44 / G49. Tool radius correction G41, G42 / G40. Pitch error memory compensation. Program number serial number search. Convert to the system. Transmission interface, DNC capability. Macro programs and variables. Program graphic display function. NC control language: Chinese, English, and other languages optional. Monitoring function: full coordinate display, spindle speed display, spindle load display, PLC ladder circuit monitoring. Protection function: over-stroke protection, overload protection, interlocking function. Installation commissioning and acceptance. Installation and commissioning: the supplier sent an experienced service engineer free of charge to the customer office is responsible for the installation of the machine, debugging work. The company received the customer feedback the first 8 hours of work time to make a preliminary judgment on the customer’s questions and further guide customers to confirm and solve, if sent to the customer service maintenance, to ensure that up to 72 hours Within the customer’s location. The item “CNC Mini Machine Center VMC630S Weiss 24×12 3 SIEMENS 808D SYSTEM AND SERVO” is in sale since Monday, June 25, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “superdiscounttools” and is located in Nanjing. This item can be shipped worldwide.

• Model: VMC6030S
• Country/Region of Manufacture: China
• MPN: VMC6030S
• Brand: WEISS MACHINERY

Series II upgraded with Series III electronics! Used exclusively in home shop, never for production. Power Drawbar and ATC. 4th Axis Rotary Table with 3 Jaw Chuck and 5C Collect Closer. Flood Coolant System. Auto Way Oiler. Modular Fixture Plate. Electronic Tool Setter. 4 Drill Chucks. 40 Tool Holders with Tools. This Item is for sale through numerous other sites. The item “Tormach PCNC1100″ is in sale since Tuesday, July 10, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “ac403″ and is located in Boulder, Colorado. This item can be shipped to United States.

• Bundle Listing: No
• Model: PCNC 1100
• Brand: Tormach