Lot of 60 CAT40 EndMill Tool Holders for CNC Haas VF2 VF3 VF4 VMC Milling Cutters, End Mills, Drill Bits, Collets Etc… Please see pictures for additional details. The item “Lot of 60 CAT40 EndMill Tool Holders for CNC Haas VF2 VF3 VF4 VMC Milling Cutter” is in sale since Sunday, January 12, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “amiron11″ and is located in Oxnard, California. This item can’t be shipped, the buyer must pick up the item.

Tormach 1100M CNC Mill REPO. Any testing done should be considered as a Courtesy and not Guaranteed, We rake pride in proper testing and listing to the best of our ability! Inks and Batteries are included as a courtesy when available, Some may be empty or low, We give with supplies. That they are received with. Just in Bank Repo Tormach 1100M In great condition, from a working Environment! Additional packaging options available at cost. Ie: Foam padding, blanket wrap etc. See our other items. The item “Tormach 1100M CNC Mill REPO” is in sale since Saturday, December 19, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “reprint_equipment” and is located in Springfield, Illinois. This item can be shipped to United States.

• Model: 1100M
• Machine Type: Milling Machine
• Table Length: 34
• Model Year: 2019
• Power Source: Electric
• Function: Milling
• Brand: Tormach
• Control: CNC

“MAKE YOUR BEST OFFER”. WILL LOAD AT NO COST! PRE-OWNED Haas VF-3 Vertical Machining Center. ON HOURS 22,296, CYCLE 4,412 FEED/CUT 3,830. X 18 with five. 40 x-axis, 20 y-axis, 25 z-axis. Spindle Nose to Table 4.2 Min. / 29.2 Max. 15hp, high torque, 7500 rpm, CAT 40. 0 hp, 220 / 440 volt AC. 122 x 94 x 101 high, 12,500 lbs. 32 Station Tool Changer. CONDITION: GOOD USED CONDITION. LOCATION: SOUTHWESTERN, OHIO UNDER POWER FOR INSPECTION. THIS ITEM IS CONSIDERED TO BE IN A GOOD USED CONDITION AND YOU CAN SEARCH SELLERS STORE jona-heath TOP RIGHT CORNER OF LISTING TO SECURE ADDITIONAL PHOTO’S, VIDEO OR OTHER INFO. THANK FOR FOR YOUR INTEREST. “Feedback and About Us”. Where you will find that we. For more expensive ITEMS acomodations can be made WITH PRIOR PERMISSION to pay with Pay Pal. We additionally accept personal, company, certified, cashiers checks drawn on recognizable U. Banks and accept bank wire transfers. Due to Homeland Security Regulations. We thank you in advance for your interest in this item and should you have any questions please feel free to ask them of us and we will try to answer them. The item “CNC HAAS VF-3 VERTICAL MACHING CTR 40X, 20Y25Z CAT 40 7500 RPM 15HP NEW SPDL 2018″ is in sale since Thursday, November 12, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “jona-heath” and is located in Dover, Kentucky. This item can be shipped to United States.

• Model: VF-3
• Modified Item: No
• Spindle Horsepower: 15 hp
• Machine Type: Vertical Milling Machine
• Custom Bundle: No
• Table Length: 15 in – 19.9 in
• Max Spindle Speed (RPM): 5001 – 7500
• Model Year: 1998
• Power Source: Electric
• X-Axis Travel Bed: 36 in – 40 in
• Y-Axis Travel Bed: 16 in – 20 in
• Z-Axis Travel Bed: 21 in – 25 in
• MPN: Does Not Apply
• Spindle Taper: CAT 40
• rs 232: hOURS CUTTING 3800
• Function: Milling
• Brand: HAAS
• Table Width: 15 in – 19.9 in
• Control: CNC

Machine had new spindle installed several years ago. New linear encoder reader head. Laser calibrated a few months ago, hasn’t been used since. Have calibration reports on hand. Very clean machine, way covers and access panels are removed for inspection. Comes with tons of tooling and holding fixtures, and new 55gal drum of Fuchs EcoCool 810 (latest and greatest) Sumps and pump cleaned, all fluids flushed and replaced. Has awesome Touch-Probe function for set up or inspection. Heidenhain TNC 426 controls. High quality German machine. Currently hooked to power for inspection. Machine weights approximately 56,000Lbs. Willing to consider trades for Land, Dozer, Excavator, etc. Let me know what you’ve got. The item “Bridge/Gantry Mill 1996 Zimmermann FZ-30 3-axis CNC Heidenhain controls” is in sale since Thursday, April 30, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “nostopin” and is located in Kelseyville, California. This item can be shipped to United States.

• Model: FZ-30
• Spindle Horsepower: 30 hp
• Country/Region of Manufacture: Germany
• Custom Bundle: Yes
• Machine Type: Machining Center
• Table Length: 240″
• Max Spindle Speed (RPM): 3500
• Model Year: 1996
• Power Source: Electric
• X-Axis Travel Bed: 196.85″
• Y-Axis Travel Bed: 112.59″
• Z-Axis Travel Bed: 39.37″
• Spindle Taper: CAT 50
• Function: Milling
• Brand: Zimmermann
• Table Width: 94″
• Bundle Description: Tons of tooling and holding fixtures, 79″ X 118″ T-slot sub-table, Round parts pedestal, NEW 55Gal drum of Fuchs EcoCool 810
• Control: Heidenhain
• Voltage: 400+

Los Angeles Scottsdale Chicago Toronto. Financing Available at low rates. See Machines In Action. 16″ X, 12″ Y, 10 Z. SPINDLE MOTOR 7.5HP. HAAS CONNECT: REMOTE MONITORING. HAAS DROP: WIRELESS FILE TRANSFER. Machinery Resources International has emerged as one of the premier names in the worldwide industrial machinery resale marketplace. With over 60 combined years in the business, customers can count on our experienced and seasoned professionals to find you the best deal for your machinery. As proud members of the MDNA, AMEA, and NAA, we hold ourselves to a higher standard. Make MRI your #1 choice for your manufacturing equipment needs! MRI is one of the premier names in the worldwide industrial machinery resale business. With over 60 combined years in the business, customers can count on our experienced and seasoned professionals. The item “HAAS MINI MILL, 16 X, 12 Y, 10 Z NEW 2020″ is in sale since Monday, December 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “machinery_resources” and is located in AZ. This item can’t be shipped, the buyer must pick up the item.

• Model: MINI MILL
• Max Spindle Speed (RPM): 6000
• Model Year: 2020
• X-Axis Travel Bed: 16″
• Y-Axis Travel Bed: 12″
• Z-Axis Travel Bed: 10″
• Spindle Taper: CAT 40
• Function: Milling
• Brand: Haas

Ghost Gunner 2 Micro CNC Milling Machine GG2. Comes with USB stick with Cutting Codes. No jigs or tooling. The item “Ghost Gunner 2 Micro CNC Milling Machine GG2″ is in sale since Wednesday, December 16, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “shogun3″ and is located in Kennesaw, Georgia. This item can be shipped to United States.

• Control: CNC
• Machine Type: Milling Machine

Table is 7-1/2″x23″ and has four 9/16″ T-Slots on 1-13/16″ centers, with a table weight capacity of 350 lbs. On center of the table. The UL Listed motor is 1 H. And is 115/230-Volt single phase and is prewired 115-Volt. It includes a worklamp, 1/2″ drill chuck with R8 arbor, drawbar, drill chuck guard, angle vise and 2-1/2″ face mill also on a R8 arbor. Entire unit weights over 440 lbs. E b a y Stores And check out our website with over 300,000 items in stock! It is fully interactive and will show you current pricing and stock availability on thousands of items! Or register today & open an account to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S Catalog, with listings of popular items from all the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Guhring, Clausing, Jet, Precision Twist-Dormer, Wilton, Norton, Starrett, Allied, Mitutoyo, YG-1 Keo, Brown & Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers from 1mm to 20mm….. Hundreds of special taps from #000 to 4, endmills, toolholders, abrasives, fasteners, machinery and much more. Give us a call! The item “NEW Jet JMD-15 Bench Type R8 Milling Machine withFree Stand” is in sale since Friday, November 27, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “tstoolsupplycompany” and is located in Holland, Ohio. This item can be shipped to United States.

• Model: JMD-15
• Spindle Horsepower: 1 HP
• Country/Region of Manufacture: China
• Machine Type: Bench Milling Machine
• Table Length: 23″
• Max Spindle Speed (RPM): 110-2580 RPM’s
• Model Year: 2020
• Power Source: Electric
• X-Axis Travel Bed: 14″
• MPN: 350017
• Spindle Taper: R8
• Function: FREE STAND
• Brand: Jet
• Table Width: 7-1/2″
• Control: Manual
• Voltage: 115/230-Volt

ACER VERTICAL MILLING MACHINE. (10 x 50 Table) w/ Standard Accessories. 3 HP Spindle Inverter Motor with Frequency Inverter Drive. Large Digital Spindle RPM Display. Spindle is designed not to turn on automatically when power is restored after power failure. Precision Grinding Head Housing; Electric Brake. Precision Spindle with ABEC-7 Bearings. Precision X, Y Axes & Knee by Hardened & Ground Square Ways to HRC 52. Rigid Meehanite GA-50 Casting; One Shot Lubricator. NEWALL 2-Axis DRO 16×36 travel. 550.00/600.00/600.00. SERVO Longitudinal Feed (M-9121-140 / M-9108-150X). 950.00/1,050.00. SERVO Cross Feed (M-9521-140 / M-9521-150). 1,100.00/1,200.00. SERVO Knee Feed (M-9811-200)….. 12 Rotary Table (Vertical & Horizontal). Chip Pan (52 x 35 x 6, 55 LBS). Clamping Kits 52 pieces. R-8 Collet Set (11pcs/set with 1/8 increment; 1/8 3/4). 6 Angle Lock Milling Vise. Maxi-Torque Auto-Air Power Draw Bar (Not Installed). #30 Spindle Taper (Replace R-8 Spindle). 520.00/580.00/605.00. Halogen or LED-L95 Work Light. 10 x 54 Table Upgrade. Upgrade Frequency Inverter (380V 520V / 3-Phase). Upgrade to UL Conformity Electric Cabinet.. 10 x 50 (10 x 54). 0.003, 0.006 / Rev. 3 HP Inverter Motor. 0 500 4,500 RPM. NEWALL 2-Axis DRO (16 x 36 Travel, 0.0002 Scale) and. ACER Longitudinal Power Feed Installed at ACER Warehouse. From 2-Axis to 3-Axis CNC Control. The item “Acer E-mill 3VKH Vertical Knee Mill” is in sale since Tuesday, October 2, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “meci1995″ and is located in Biddeford, Maine. This item can be shipped to United States, Philippines, Cayman islands.

• Brand: ACER
• MPN: 3VKH

ZX30 Mill/Drill Milling Machine with stand. I have had this Mill for 11 years and it has been a great tool. R8 drill chuck, vise, 2 drawbars and drawbar wrench are included. Everything works and has not been used a whole lot, Wired for 110V currently but can also support 220v if desired. A couple of small dents in the table but they do not affect function. I do not have any lifting equipment available. The item “ZX30 Mill/Drill Milling Machine” is in sale since Sunday, December 13, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “gr8crashes” and is located in Fort Lauderdale, Florida. This item can’t be shipped, the buyer must pick up the item.

• Function: Drilling
• Machine Type: Milling Machine
• Brand: Wholesale Tool
• Model Year: 2009
• Spindle Taper: R8
• Spindle Horsepower: 2 hp
• Power Source: Electric
• Control: Manual

Recent searches

• zx 30 round column mill

Spindle Nose to Table Top…………………………………………………………………………….. Coolant Tank & Pump. Vise pictured NOT included. ONLY 420 ORIGINAL SPINDLE HOURS!!! Used Equipment Sales Contact. To see if you qualify contact Celeste Bozzi. Please verify it’s availability before purchasing! Skidding/Crating of items are extra costs. All items are subject to prior sale. Established 2009, 520 Machinery Sales is a full service machine tool distribution company servicing the Northern Illinois territory for new equipment and across the nation for Used Equipment. We have recently opened a satellite office in Phoenix AZ for Used Equipment sales. 520 Machinery Sales consists of a 30 person team; which includes two office administrators, eight new equipment sales professionals, ten Used Equipment sales professionals, ten Service and Application Engineers including a dedicated Parts Manager. Also, included is an automation specialist for robotics and custom applications. Our service personnel are involved in factory training including both Fanuc and Mitsubishi programming. Our locations include a 10,000 sq. Office and showroom in Schaumburg along with an additional 5,000 sq. Used Equipment Center also located in Schaumburg and a 2000 sq. Sales office in Phoenix. We have been awarded with winning Service and Sales achievements in 2017 and have achieved builder sales quotas in all years since 2010. Product offerings include: Samsung Machine Tools, Muratec Machinery, Tornos, Milltronics Machinery along with various machine tool accessory offerings. Our company mission is to support our customers by providing superior products and services of exceptional value which help them gain competitive advantage in their market. 520 Machinery Sales strives to provide the highest standards of service available through our highly trained sales and service personnel. We provide work environments where our employees can meet their potential and thrive in an atmosphere of excellence. We strive to exceed the industry standard in service to customers while maintaining a superior level of integrity in interactions with business partners and associates. 520 Machinery Sales appreciates our achieved success and conduct our business as model corporate citizens. John Schneider; Co-Owner of 520 Machinery Sales. With 24 years of machine tool sales history and previously worked for family business of a contract machining company. Everett Dahlberg; Co-Owner of 520 Machinery Sales. With over 25 years of sales history with over 20 years of machine tool sales experience. Dave Fahlgren; Co-Owner of 520 Machinery Sales. With 15 years of machine tool sales experience. Wes Kowalczyk: Over twenty years of machine tool sales experience and joined the 520 sales staff in 2011. Mike Land- 30 years of machine tool sales experience and joined the 520 sales staff in 2015. Dan Anderson- 20 years of machine tool sales experience and joined the 520 sales staff in 2019. Brian Doherty- Has ten years of industrial sales experience and joined the 520 sales staff in 2015. In addition to our new sales team, 520 machinery has a 9 person strong used equipment team. The used equipment team helps to generate new equipment sales through various outlets not traditionally used for new equipment. The inside sales role of 520′s used equipment team is something that sets 520 apart from our competition. The used equipment team is as follows. Mark Lipowski- used equipment manager, 20+ years in used equipment sales. Bob Nelson- 20+ years in used equipment sales. Cris Mulvihill- 20+ years in used equipment sales. Jason Stob- 11+ years in used equipment sales. Nate Parker- 10+ years in used equipment sales. Brian Foerster- 5+ years in used equipment sales. Zeno Molteni- 5+ years in used equipment sales. Kurt Dahlberg- 3+ years in used equipment sales. Our company philosophy has and will be to maintain the highest degree of integrity along with a teamwork mentality when working with customers, builders and vendors. We are financially strong and we pride ourselves on our ability of making payments in a timely manner. Data base of northern Illinois territory with Sales Force as the CRM. Aggressive marketing campaigns consisting of cold calling, direct mailings, mass e-mails, websites, trade association involvement and telemarketing. Our used equipment staff has been trained to augment our new equipment sales by offering trade-in programs, often times with other machine tool distributors all across the country. The item “Used 2012 Haas Mini Mill CNC Vertical Machining Center Rigid Tap USB CT40 CLEAN” is in sale since Thursday, December 3, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “520machinery” and is located in Schaumburg, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Model: Mini Mill
• Modified Item: No
• Custom Bundle: No
• Machine Type: Machining Center
• Model Year: 2012
• Power Source: Electric
• Spindle Taper: CAT 40
• Non-Domestic Product: No
• Type: CNC, Vertical
• Brand: Haas
• Control: CNC