FADAL #VMC3016L VERTICAL MACHINING CENTER – 2002. 7,500 RPM. TRAVEL: X, Y, Z – 30″, 16″, 20. INSPECT UNDER POWER. PLEASE CONTACT DE OR JOHN WITH ANY QUESTIONS. We have a loading dock and fork lifts with the ability to load any type of truck. Please indicate the following. We can either use your account number or provide a rate quote. Here’s the link to upload to.
Comments Off
FADAL #VMC15XT VERTICAL MACHINING CENTER. CNC 88HS CONTROL. INSPECT UNDER POWER. TRAVEL: X, Y, Z – 20″, 16″, 20. PLEASE CONTACT DE OR JOHN WITH ANY QUESTIONS. We have a loading dock and fork lifts with the ability to load any type of truck. Please indicate the following. We can either use your account number or provide a rate quote. Here’s the link to upload to.
Comments Off
2006 Fadal 4525 CNC with multi processor. Travel X-axis 45″, Y-Axis 25″ and Z-Axis 24. Table size 53.5 x 25. Spindle speed 10,000 RPM, Spindle Motor 22.5HP. Spindle nose to table 4″-24″. Rapid Traverse (X/Y/Z) 900/700 IPM. Spindle Taper CAT 40.
Comments Off
Fadal VMC 4020 HT CNC VMC, 2007. {Title}Taper Size: CAT 40 Speed Range: 75 – 10,000 RPM Spindle Power: 15 HP Travels: X-Axis: 40? Rapid Traverse Rates: 900 Inch Per Minute Cutting Feed Rates: 400 IPM Spindle Nose to Table Min. Max Weight on Table: 3600 lbs Air Required: 80 psi, 15 scfm Power: 240v 3-Phase Overall Dimensions: 122? High Weight (Approx) : 12500 lbs Equipped With: Fadal CNC88HS Control MM Ball Screws High Speed CPU AC Motors 4th Servo Controller and Disconnect Chiller Rigid Tap 4 Meg Memory Expansion. Taper Size: CAT 40 Speed Range: 75 – 10,000 RPM Spindle Power: 15 HP. Max Weight on Table: 3600 lbs. Air Required: 80 psi, 15 scfm Power: 240v 3-Phase Overall Dimensions: 122? High Weight (Approx) : 12500 lbs. Equipped With: Fadal CNC88HS Control MM Ball Screws High Speed CPU AC Motors 4th Servo Controller and Disconnect Chiller Rigid Tap 4 Meg Memory Expansion.
Comments Off
FADAL CNC 6030 WITH 4TH AXIS. THIS MILL IS IN GREAT CONDITION AND HOLDS. 001 TOLERANCE ALL DAY AS CAN BE SEEN IN THE VIDEO BELOW. IT’S FULLY LOADED WITH 4TH AXIS, RENISHAW TOOL PROBE, CALMOTION USB SYSTEM, THROUGH SPINDLE COOLANT, WASH DOWN SYSTEM, CHIP DRUM SYSTEM, RIGID TAPPING AND SPINDLE CHILLER. IT CAN BE SEEN UNDER POWER IN THE VIDEO BELOW OR AT MY PLACE IN LOUISVILLE KENTUCKY. INFO IN VIDEO BELOW. FADAL 6030 CNC WITH 4TH AXIS VERTICAL MACHINING CENTER.
Comments Off
This is a very good used Fadal VMC8030 with 30 tools servo turret. 1998 machine rebuilt in 2009. Can see in Valencia CA.
Comments Off
Fadal 60/30HT CNC Machining Center (1994). New Turcite on Saddle and Table. New Spindle Drive (continuous duty) 10,000 RPM. New Y Axis Ball Screw. X Axis Travel 60. Y Axis Travel 30. Z Axis Travel 30. Full Functional TR65 5 Axis Trunnion with Hydraulic Brakes. Recently Rebuilt Fully Functioning Hydraulic Brake System. A Axis Travel: Unlimited. B Axis Travel: +15 and -98. Large 30 Tool Turret. Coolant Through (properly functioning-No Leaks). Extra Large Spindle Chiller. Steel Y Axis Thrust Plate. Tuned Servo for superior response, less than. 001 Following Error under Full Acceleration and Contouring. This Machine is Rebuilt, better than new. We have owned multiple CNC Machines including a Gantry Router over the span of thirty-five years. This particular machine was built to be my personal machine, but due to health issues, I have to sell it. Machine weighs approximately 18,000 lbs.
Comments Off
Fadal VMC 4020 HT CNC VMC, 2007. {Title}Taper Size: CAT 40 Speed Range: 75 – 10,000 RPM Spindle Power: 15 HP Travels: X-Axis: 40? Rapid Traverse Rates: 900 Inch Per Minute Cutting Feed Rates: 400 IPM Spindle Nose to Table Min. Max Weight on Table: 3600 lbs Air Required: 80 psi, 15 scfm Power: 240v 3-Phase Overall Dimensions: 122? High Weight (Approx) : 12500 lbs Equipped With: Fadal CNC88HS Control MM Ball Screws High Speed CPU AC Motors 4th Servo Controller and Disconnect Chiller Rigid Tap 4 Meg Memory Expansion. Taper Size: CAT 40 Speed Range: 75 – 10,000 RPM Spindle Power: 15 HP. Max Weight on Table: 3600 lbs. Air Required: 80 psi, 15 scfm Power: 240v 3-Phase Overall Dimensions: 122? High Weight (Approx) : 12500 lbs. Equipped With: Fadal CNC88HS Control MM Ball Screws High Speed CPU AC Motors 4th Servo Controller and Disconnect Chiller Rigid Tap 4 Meg Memory Expansion.
Comments Off
This machine is in great condition with no issues. It is all original paint. All of the axis sound great as well as the spindle. The machine is tight. If your local and would like to come see this machine in person I can power it up for you. Once it leaves my possession I’m no longer responsible for it. I do have a forklift on site and can load for you. I took a VERY DETAILED video of me operating this machine the day I posted this ad. Please watch that video by clicking on the video like in this box. I do have this machine posted on other platforms and reserve the right to remove at any time if I sell on one of those platforms. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “admoi-13″ and is located in this country: US. This item can be shipped to United States.
Comments Off
Fadal 3016HT 10K RPM remanufactured in 2002. Nicest Fadal you will find on the market right now. This Fadal is in like new condition and has less than 900 spindle hours! It was kept in a science lab clean room drilling tiny holes in aluminum it’s whole life until I picked it up about a year and a half ago. It was recently tuned up by Alwin Machinery. This is the most sought after model of Fadal for hobbyist as its small enough to fit in a garage and has the box ways which makes it to most ridgid model ever made. It has ridgid tapping along with the 10k high torque hi/low spindle and expanded memory. I also upgraded it to the Calmotion usb for easy program transfer. The tooling is not included it the price listed but I would like to sell it as a whole package to the right person for an additonal 1500. Package would include all Mari tool holders and collets seen in the tool holder and laid out on the table, also the coolant and 5gal of the spindle lube. Machine is under power to inspect in Milwaukee Wi. Comes with all original manuals and documents. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “beroukas” and is located in this country: US. This item can be shipped to United States.
Comments Off
