NOS Genuine Bridgeport Series I Mill Milling J Head X + Y Axis Feed Bracket Nut.

Genuine 2HP electric 3 phase motor from a complete and running Bridgeport Milling Machine. This electric motor works as it should and came off a running mill. The fan on the top has one cracked fin and the shroud is missing. However this motor works as intended and comes exactly as shown in photos ready to be put to work.

Set of Bridgeport right angle milling head with two arbor supports. Head spins smooth and freely. No cracks or heavy wear. Some scuffs, paint scuffing, light corrosion in a few spots but everything is in good working shape.

Genuine BRIDGEPORT QUILL HOUSING J Head. Head was removed in working order and dissembled. Thanks for looking and please view our other items.

Genuine German kress 800 fme – 220 v 1-phase High Precision 800w Cnc Spindle. Kress milling / routing spindle – FME 800. You can find many test videos on YouTube. The speed range is 10,000 – 30000 rpm. The 43H7 stainless steel mounting neck ensures that the bearing seats are not compromised when the spindle is clamped into the spindle holder. This prevents overheating of the bearings and the spindle itself. Like all spindles we offer, it is very quiet – only 74 dB at 5000 rpm. Spindle neck 43H7 made of stainless steel. MAXX-Power milling motor 800 Watt. Full wave electronics for constant power and speed. Soft start and start current limiter. Spindle winding protected against dust and particulates. Aluminum motor body with double bearing. Spindle lock for very very easy tool changes. Automatic cut-off carbon brushes to protect the motor. Power cord with patented quick connect. Power cable – length 4 meters / 6 meters available as an accessory. Power requirement: 220v and 50/60 Hz. Power consumption 800 watts. Speed range: 10,000 -30000rpm. Largest collet diameter: 10 mm. Mounting neck: Ø 43 mm – Stainless steel. Maximum milling diameter: 36mm. Machine weight 1.4 kg. Milling/routing spindle Kress FME 800. Precision collet 8 mm. 4 meter power cord. Quality – Made in Germany.

ALL SIZES IN STOCK 56-1/2 OVER ALL.

Saddle from Bridgeport milling machine.

Genuine German kress 800 fme – 220 v 1-phase High Precision 800w Cnc Spindle. Kress milling / routing spindle – FME 800. You can find many test videos on YouTube. The speed range is higher than the 220V models – 10,000 – 30000 rpm. The 43H7 stainless steel mounting neck ensures that the bearing seats are not compromised when the spindle is clamped into the spindle holder. This prevents overheating of the bearings and the spindle itself. Like all spindles we offer, it is very quiet – only 74 dB at 5000 rpm. Spindle neck 43H7 made of stainless steel. MAXX-Power milling motor 800 Watt. Full wave electronics for constant power and speed. Soft start and start current limiter. Spindle winding protected against dust and particulates. Aluminum motor body with double bearing. Spindle lock for very very easy tool changes. Automatic cut-off carbon brushes to protect the motor. Power cord with patented quick connect. Power cable – length 4 meters / 6 meters available as an accessory. Power requirement: 110V and 50/60 Hz. Power consumption 800 watts. Speed range: 10,000 -30000rpm. Largest collet diameter: 10 mm. Mounting neck: Ø 43 mm – Stainless steel. Maximum milling diameter: 36mm. Machine weight 1.4 kg. Milling/routing spindle Kress FME 800. Precision collet 8 mm. 4 meter power cord. Quality – Made in Germany.

Genuine Yeong Chin No. 503-E04-263M CNC Circuit PC Board YCM Supermax. Pulled off a running YCM Supermax milling machine. Used but in good usable condition. Comes exactly as shown.

Genuine Esco Mill Hog MBB-2 Bevel Blade. 750in wide(19.1mm)37-1/2º TiN lot of 5. Cutter Blades are made of T-15, the best tool steel available, and produce a thick chip without cutting fluids on high alloy pipe and tube. Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses. Upon receipt of your item(s), if you are not satisfied or an error has been made, please contact me to resolve the issue. Please repackage the item as it was sent to you. New items must be unopened. Exact details for mailing items will be sent after a return has been approved. Thank you for looking at our item. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines”. The seller is “woodburystore” and is located in this country: US. This item can be shipped to United States.

• Brand: ESCO
• Function: Milling
• Control: Automatic
• Machine Type: MIll Hog
• Model: Hog MBB-2
• MPN: MBB-2