The table does rotate also just not with a handle uses two allen screws and there is also a dial. Everything works smooth and without issue. All the parts are there. This has been lightly used and all the mechanics show it. There is some paint on the front right corner.

The item “ATLAS CRAFTSMAN DRILL PRESS XY MILLING DRILLING TABLE 150″ is in sale since Tuesday, December 02, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “onlinepro1″ and is located in McHenry, Illinois. This item can be shipped to United States.

• Country/Region of Manufacture: United States
• Brand: Atlas/Craftsman

Small atlas milling machine model mf automatic feed. Mill is in very good condition used very little. Includes a rolling table. Head and tail stock are replacements. Auxiliary motor that can be mounted vertically. New 3 jaw chuck made in england with extra set of jaws. 5 emco double conical collets that fit tail stock.

The item “Small Atlas Milling Machine Model MF Automatic Feed” is in sale since Saturday, November 29, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “afs31″ and is located in Cumming, Georgia. This item can’t be shipped, the buyer must pick up the item.

Here’s a chance to own an atlas mill with many rare accessories. This is a model mf atlas horizontal milling machine.

The mill is in good working order. I have primarily used it for slotting. At this point it has been sitting for a little while. It could use a good cleaning and lubing. Even so, it works just fine.

I upgraded it a while back with a really nice 1/2hp atlas motor that can be wired 110v or 220v, swapped out the zamak bull gear with a nice machined steel one, and replaced the rear spindle retaining nut with a slotted clamping nut. I have the original parts that were replaced. I also have the original?

1/3hp motor that is grounded to the frame and would need to be rewound. As seen in the photos, the mill also includes:rare marvin vertical milling head that includes the even more rare top cover i have the original marvin nut that holds the belt pulley to the spindle, but it is shown with the arbor driver holding it in place which i prefer to use. This is one of the most complete marvin vertical heads you will find! Marvin vertical milling heads generally sell for $1,200 to $1,500 by themselves (when you can find them). Very rare m1-551 coolant tank. Rare shell end mill driver. 56b spindle mounted chuck. 7/8″ and 1″ horizontal milling arbors with driver and overarm support. Original atlas vise with handle. Original m1-64 power feed kick out is attached to the front of the bed. 3/8″ and 1/2″ end mill holders. 3/16″, 5/16″, 1/4:, and 1/2 hardinge 2mt collets for the spindle taper. Very sturdy homemade overarm support bar – this double bar system is way more sturdy than the original. Top and rear covers for the countershaft assembly. The countershaft assembly covers are not currently on the machine. I replaced the countershaft oilers with larger ones, and the oilers interfere with the top cover. There is nothing wrong with the covers besides that. They are in great shape.

All in all a very nice machine with some rather scarce accessories on a sturdy wooden stand with trip tray. You won’t find another one listed with all these accessories. I will help load.

This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: United States
• Brand: Atlas
• Model: MF

Here’s a chance to own an atlas mill with many rare accessories. This is a model mf atlas horizontal milling machine. The model mf has eight feed rates per setting of the change-o-matic. I believe the later ones were six. There isn’t much else you need if you’re looking for an atlas horizontal milling machine and want to start cutting metal. Let the pictures help with the description. The mill is in good working order. I have primarily used it for slotting. At this point it has been sitting for a little while. It could use a good cleaning and lubing. Even so, it works just fine.

I upgraded it a while back with a really nice 1/2hp atlas motor that can be wired 110v or 220v, swapped out the zamak bull gear with a nice machined steel one, and replaced the rear spindle retaining nut with a slotted clamping nut. I have the original parts that were replaced.

I also have the original? 1/3hp motor that is grounded to the frame and would need to be rewound. As seen in the photos, the mill also includes:rare marvin vertical milling head that includes the even more rare top cover i have the original marvin nut that holds the belt pulley to the spindle, but it is shown with the arbor driver holding it in place which i prefer to use. This is one of the most complete marvin vertical heads you will find! Marvin vertical milling heads generally sell for $1,200 to $1,500 by themselves (when you can find them). Very rare m1-551 coolant tank. Rare shell end mill driver. 7/8″ and 1″ horizontal milling arbors with driver and overarm support.

Original atlas vise with handle. Original m1-64 power feed kick out is attached to the front of the bed. 3/8″ and 1/2″ end mill holders. 3/16″, 5/16″, 1/4:, and 1/2 hardinge 2mt collets for the spindle taper. Very sturdy homemade overarm support bar – this double bar system is way more sturdy than the original.

Top and rear covers for the countershaft assembly. The countershaft assembly covers are not currently on the machine. I replaced the countershaft oilers with larger ones, and the oilers interfere with the top cover. There is nothing wrong with the covers besides that. They are in great shape. This could be remedied with the smaller oilers, but i prefer the larger ones. I also recently broker the little plunger know off the backgear engaging handle. I have the little knob and it is an easy fix for anyone with even little to no machining experience.

I will try to replace it before the new owner takes receipt of the machine. All in all a very nice machine with some rather scarce accessories on a sturdy wooden stand with trip tray. You won’t find another one listed with all these accessories. This mill and its accessories is also for sale locally.

I was able to lower the reserve price to $2,200, but vise shown in photos is not included.The item “Atlas Horizontal Mill w/ MARVIN VERTICAL HEAD and OTHER RARE ACCESSORIES” is in sale since Sunday, November 16, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jwcolby” and is located in Sacramento, California. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: United States
• Brand: Atlas
• Model: MF

Here’s a chance to own an atlas mill with many rare accessories. This is a model mf atlas horizontal milling machine.

The model mf has eight feed rates per setting of the change-o-matic. I believe the later ones were six. There isn’t much else you need if you’re looking for an atlas horizontal milling machine and want to start cutting metal. Let the pictures help with the description. The mill is in good working order. I have primarily used it for slotting.

Even so, it works just fine. I upgraded it a while back with a really nice 1/2hp atlas motor that can be wired 110v or 220v, swapped out the zamak bull gear with a nice machined steel one, and replaced the rear spindle retaining nut with a slotted clamping nut.

I have the original parts that were replaced. I also have the original? 1/3hp motor that is grounded to the frame and would need to be rewound. As seen in the photos, the mill also includes:rare marvin vertical milling head that includes the even more rare top cover i have the original marvin nut that holds the belt pulley to the spindle, but it is shown with the arbor driver holding it in place which i prefer to use.

This is one of the most complete marvin vertical heads you will find! Marvin vertical milling heads generally sell for $1,200 to $1,500 by themselves (when you can find them). Very rare m1-551 coolant tank.

Original m1-64 power feed kick out is attached to the front of the bed. 3/8″ and 1/2″ end mill holders. 3/16″, 5/16″, 1/4:, and 1/2 hardinge 2mt collets for the spindle taper. Very sturdy homemade overarm support bar – this double bar system is way more sturdy than the original.

Top and rear covers for the countershaft assembly. The countershaft assembly covers are not currently on the machine. I replaced the countershaft oilers with larger ones, and the oilers interfere with the top cover.

There is nothing wrong with the covers besides that. They are in great shape. This could be remedied with the smaller oilers, but i prefer the larger ones. I also recently broker the little plunger know off the backgear engaging handle. I have the little knob and it is an easy fix for anyone with even little to no machining experience. I will try to replace it before the new owner takes receipt of the machine. All in all a very nice machine with some rather scarce accessories on a sturdy wooden stand with trip tray. You won’t find another one listed with all these accessories.The item “Atlas Horizontal Mill w/ MARVIN VERTICAL HEAD and OTHER RARE ACCESSORIES” is in sale since Sunday, November 09, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “jwcolby” and is located in Sacramento, California. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: United States
• Brand: Atlas
• Model: MF

Atlas model 7b shaper with original cast iron stand and s7-92 vise. Original wrenches and manual are included with the sale. The original motor is still on the machine. I plugged the shaper in and both the ram and feed work fine. Please look at all pictures and ask any and all questions as all sales are final.The item “Atlas Model 7B Shaper” is in sale since Sunday, October 26, 2014. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “walnut-ridge-farm” and is located in Cedar Lake, Indiana. This item can’t be shipped, the buyer must pick up the item.

• Country/Region of Manufacture: United States
• Brand: Atlas
• Model: 7B

Horizontal arbor designed specifically for atlas horizontal milling machines. Morse taper mt 2 with 3/8-16 drawbar threads.

Has proper drive notches, length, bushing size. Includes a small pc of key stock as shown.

Precision machined, hardened and ground. Tested on an atlas mill for perfect fit and operation. (sorry to restate the obvious but someone is going to think they get all 3). I had these custom machined for me to my specs, they are not available anywhere else. See my other listings for the other sizes.The item “NEW MORSE TAPER 2 7/8 ARBOR FOR ATLAS HORIZONTAL MILL” is in sale since Thursday, August 06, 2009. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “tools4cheap” and is located in Harvard, Massachusetts. This item can only be shipped to Australia.

Has proper drive notches, length, bushing size. Includes a small pc of key stock as shown. Precision machined, hardened and ground. Tested on an atlas mill for perfect fit and operation.

(sorry to restate the obvious but someone is going to think they get all 3). I had these custom machined for me to my specs, they are not available anywhere else. See my other listings for the other sizes.

Atlas press company – shown in photos – working condition – all original. See all photos – belt cover is cracked and welded. Latch has been broken and replaced with an i hook – as shown in photo.

The item “ATLAS SHAPER Model 7B Made in Kalamazoo, Michigan Must See” is in sale since Saturday, November 23, 2013.
It is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Milling”. The seller is “ddbb1960″ and is located in Gaines, Michigan. This item can’t be shipped, the buyer must pick up the item.

• Model: 7B
• Country of Manufacture: United States
• Brand: Atlas
• MPN: SERIAL #006562